}

Tender For Improvement And Development Of Existing Submersible Pumpset At Ctc At Opposite Authority In Ward No. 239 Under Shahdara (North) Zone, Delhi-Delhi

Municipal Corporation Of Delhi has published Tender For Improvement And Development Of Existing Submersible Pumpset At Ctc At Opposite Authority In Ward No. 239 Under Shahdara (North) Zone. Submission Date for this Tender is 26-11-2024. Submersible Pump Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

46266986
Tender For Improvement And Development Of Existing Submersible Pumpset At Ctc At Opposite Authority In Ward No. 239 Under Shahdara (North) Zone
Open Tender
Indian
Delhi
Delhi
26-11-2024

Tender Details

Improvement And Development Of Existing Submersible Pumpset At Ctc At Opposite Authority In Ward No. 239 Under Shahdara (North) Zone; 2 7.5.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm 3 7.6.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm 4 AR 5 122.2.151.(b):S & F following size of G.I. Socket. as reqd. 32mm 6 122.2.152.(b):S & F following size of G.I. Union. as reqd. 32mm 7 122.2.153.(b):S & F following size of G.I. Elbow. as reqd.. 32mm 8 122.2.155.(b):Supply, Installation, testing and commissioning of cubical type control panel board for single phase & Three Phasesubmersible pumping set of following rating complete with contactor, relay , MCB ,condenser ,voltmeter, ammeter and indication lamp etc includingconnections etc as reqd. 1.5 HP (Single Phase) 9 122.2.156.(a):P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. 3x 2.5 sq.mm 10 122.2.158.(a):Supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set i/c clips etc complete as reqd. 6 mm 11 122.2.159:Development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or linei/c cost of fuel, hire charges of compressor etc as reqd. The development shall be considered complete when Gravel stop sinking, Discharge ceased to improve and the sand contents are not more than 10 PPM after 20 minutes of starting the pump complete as reqd. 12 122.2.154B.(a):Supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. Single Phase 1.5 HP having discharge of 72 LPM Approx. at 49 M Head. 13 122.2.144.(a):Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, up to 90 metre depth below ground level. All type of soil (200 mm dia.) 14 122.2.147.(b):Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm dia. (Nominal Bore) 15 122.2.148.(b):Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm dia. (Nominal Bore) 16 122.1.3:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*10 sqmm 17 DSR Civil 18 23.13.2:Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewellof:150 mm dia 19 23.14.1:Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS : 2800 ( part I), including necessary bolts & nuts of required size complete.100 mm clamp 20 18.12.3:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work25 mm dia nominal bore 21 18.12.4:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work32 mm dia nominal bore

Key Value

Document Fees
INR 590 /-
EMD
INR 2442.0 /-
Tender Value
INR 1.17 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail