Providing Supplying And Installation Of Indoor Gym Equipments At Various Locations Of New Delhi Constituency (Ac-40), Under Mla Lad Fund Works.-1 Providing and installation of 6 Multi Gym Station. The frame structure shall be made up of CRC tubular section 100mm x 50mm and 50mm x 50mm with minimum thickness of 12 gauges Fixed weight stack shall be as per the required weight. The equipment shall have rubberized weight, cast iron finished plates with rubberized coating, nylon pulley with double ball bearing, chrome plated guide rods, weight stack enclosure with acrylic sheet cover, 6mm thick cable with clamps to hold properly, high density foam with leatherette upholstery powder quoted finish (minimum 80 micron) and rubber boots in the bottom and chrome plated handles and bars etc. complete and as per direction of Engineer-in-Charge. Multi Gym 6 Station, Total Counter Weight -360 Kg Description of Gym Equipment Counter Weight Station (a) High Lat Pulley/Over Pulley/Lat Pull Down 80Kg in the steps of 5kg each 1.00 (b) Pack Deck/Vertical Butterfly 60kg in the steps of 5kg each 1.00 (c ) Chest Press Bearing Based 80kg in the steps of 5kg each 1.00 (d) Seated Rowing (Low Pulley) Bearing Based 80kg in the steps of 5kg each 1.00 (e ) Leg Curl + Leg Extension 60kg in the steps of 5kg each 1.00 (f) Chin Up Bar Free Weight 1.00 (g) Total Weight & Total Station 360 kg 6.00 2 Providing and installation Olympic flat bench/ bench press with back squat of size -63” X 77” X 63”, Weight -121 LBS MAX Load capacity -1100 LBS and etc. all complete and as per direction of Engineer-in-Charge. 3 Providing and supplying of Hex dumbells set (1 set =2.50kg/6, 5kg/2, 7kg/2) of approved make and all complete etc. as per direction of Engineer-in-Charge. 4 Providing and supplying Rubber weight plate (1 set = 2.50kg/12, 5kg/4, 7.5kg/4=80kg) of approved make and all complete etc. as per direction of Engineer-in-Charge. 5 Providing and supplying Solid Crome Plate Olympic Curl Bar 4Ft. Long of approved make and all complete etc. as per direction of Engineer-in-Charge. 6 Providing and supplying Supplying of 5 meter long and 10mm dia SKIPPING ROPE made with manufacturer specifications, all complete as per direction and entire satisfaction of Engineer-in- Charge 7 Providing and supplying Football of approved make, Material of football Cover: Typically made from synthetic leather or polyurethane (PU), which offers durability and a good touch. Some high-end balls use premium materials for enhanced performance. Bladder: The inner bladder is often made from latex or butyl rubber. Butyl bladders are more common due to their superior air retention and consistency and all complete etc. as per direction of Engineer-in-Charge. Providing and supplying Volley Ball of approved make 1. Material: Cover: Volleyballs are typically made from synthetic leather or composite materials, which offer durability and a good feel for the ball. High-quality volleyballs might use premium synthetic materials or genuine leather. Bladder: The inner bladder is usually made from latex or butyl rubber. Butyl bladders are more common in high-quality balls due to their superior air retention. 2. Size: Standard Size: The official size of a volleyball is about 8.1 to 8.3 inches (20.6 to 21 cm) in diameter. 3. Weight: Regulation Weight: Volleyballs typically weigh between 9.2 to 9.6 ounces (260 to 280 grams). This weight provides the right balance between control and power during play and all complete etc. as per direction of Engineer-in-Charge. 15.00 Providing and supplying Pair Of Pole For Volley Ball/ Badminton of approved make with Base made of M.S Channel, with concrete filled double weights, upright of 3 x 4 pipe, adjustable height with pulley and tighter portable and moveable on wheels. Weight approx 400 kg (+-25 kg) and all complete etc. as per direction of Engineer-in-Charge. 15.00 Providing and supplying Badminton Net of approved make Specification for Net:- 1. Badminton Net 6.1m x 0.76m, 2. Mesh Size : 19mm, 3. Headband Thickness : 37mm, 4. Weight : 0.8 to 1 kg, 5. Net Braided Nylon Twine with 19mm mest. 6. Net Headband PVC coated fabric (dual-stitched), 7. Eyelets corrosion resistant brass, 8. Badminton Nets feature overlocked edge for increased strength and all complete etc. as per direction of Engineer-in-Charge. 15.00 Providing and supplying Volley Ball Net of approved make, Weight of ball – 1kg Approx etc. all complete and as per direction of Engineer-in-Charge. 15.00 Providing and supplying Basket Ball of approved make Material: Cover: Commonly made from synthetic rubber, composite leather, or genuine leather. Each material offers different levels of grip, durability, and performance. Synthetic Rubber: Durable and cost-effective, often used for outdoor play. Composite Leather: Provides a good balance of grip and durability, used for both indoor and outdoor play. Genuine Leather: Premium material offering superior grip and feel, primarily used for indoor play etc. all complete and as per direction of Engineer-in-Charge. 15.00 Providing and supplying Table Tennis Racket of approved makeMaterial: Typically made from multiple layers of wood or composite materials. High-quality blades may include carbon fiber or other materials to enhance performance. Layers: Most blades are constructed with 5 to 7 layers of wood or a combination of wood and composite materials. Each layer contributes to the blade’s flexibility, control, and power etc. all complete and as per direction of Engineer-in-Charge. 15.00 14 Providing and supplying Cricket Bat of approved make 1. Material: Willow Type: Kashmiri willow is harvested from the Salix alba tree, which grows in the Kashmir region of India. It is generally less expensive and denser compared to English willow. Quality: The quality of Kashmiri willow can vary, with higher grades offering better performance and durability. 2. Size: Length: Standard cricket bats are typically around 33 to 34 inches (83 to 86 cm) in length, including the handle. Width: The width of the blade is usually between 4.25 to 4.5 inches (10.8 to 11.4 cm). 3. Weight: Range: Kashmiri willow bats generally weigh between 2.6 to 3.0 pounds (1.18 to 1.36 kg). The weight can vary depending on the players preference and the bats design etc. all complete and as per direction of Engineer-in-Charge. 15 Providing and supplying Tennis Ball of approved make 1. Material: Core: Typically made of a rubber compound. The core is pressurized to provide the bounce and responsiveness characteristic of a tennis ball. Felt Cover: Made from a blend of wool and nylon. The felt provides traction, helps with ball control, and affects the balls interaction with the racket and court surface. 2. Size: Diameter: Standard tennis balls have a diameter ranging from 2.57 to 2.70 inches (6.54 to 6.86 cm). 3. Weight: Standard Weight: Generally weighs between 1.98 to 2.10 ounces (56 to 59 grams). etc. all complete and as per direction of Engineer-in- Charge. 16 Providing and supplying Wicket set (6 pcs wicket + 4 Bails) of approved make etc. all complete and as per direction of Engineerin- Charge. 17 Providing and supplying Resistance Tubes of approved make 1. Material: Latex: Traditional resistance bands are made from latex rubber, known for its elasticity and durability. Thermoplastic Elastomer (TPE): A latex-free alternative, TPE bands are hypoallergenic and can be a good option for those with latex allergies. 2. Size: Length: Typically ranges from 4 to 12 feet (1.2 to 3.7 meters), though shorter bands are available for specific exercises or portability. Width and Thickness: Bands can vary in width from about 1 to 2 inches (2.5 to 5 cm) and thickness from about 0.1 to 0.5 inches (0.25 to 1.3 cm). Wider bands often provide more resistance and can be used for different exercises etc. all complete and as per direction of Engineer-in-Charge. 18 Providing and supplying Plastic Ring of approved make 1. Material: Types: Typically made from plastics such as polypropylene (PP), polyethylene (PE), acrylic, or polycarbonate.Properties: Chosen for their durability, lightweight nature, and ease of manufacturing. 2. Size: Diameter: Can range from small (a few millimeters) to large (several centimeters), depending on the application. For example, rings used in crafts might be small (1-2 cm in diameter), while rings used in industrial applications might be larger. Thickness: Varies according to the use, from very thin (a few millimeters) to thick (several centimeters). etc. all complete and as per direction of Engineer-in- Charge. 19 Providing and supplying Plastic Disk of approved make 1. Material: Plastic Type: Often made from high-density polyethylene (HDPE), polypropylene, or acrylic. These materials are chosen for their durability, light weight, and smooth finish. Finish: Can be matte or glossy, depending on the desired aesthetic and function. 2. Size: Diameter: Typically ranges from 1 to 4 inches (2.5 to 10 cm). For example, in carom, the standard diameter is approximately 1.25 inches (3.2 cm). Thickness: Ranges from 0.2 to 0.5 inches (0.5 to 1.3 cm). Thicker disks are often used for greater impact and durability. 3. Weight: Lightweight: Plastic disks are generally lightweight to facilitate ease of movement and handling. The weight depends on the size and thickness but is usually designed to ensure consistent gameplay or function. etc. all complete and as per direction of Engineer-in-Charge. 20 Providing and supplying Carrom Board 20 Inch With High Quality Carrom Coins, Striker and Powder of approved make 1. Size: Standard Dimensions: Typically, the board is a square with dimensions ranging from 29 to 32 inches (74 to 81 cm) on each side. Tournament boards are usually 32 inches (81 cm) square. Thickness: The playing surface is usually 0.75 to 1.5 inches (1.9 to 3.8 cm) thick, with a frame around the edge. 2. Material: Playing Surface: Often made of high-quality plywood or MDF (medium-density fiberboard). Some boards use a smooth, laminated surface to ensure a consistent playing experience. Frame: Typically made from wood or metal, providing structural support and durability etc. all complete and as per direction of Engineer-in- Charge. 21 Providing and supplying Chess Sets of approved make 1.Size: Standard Chessboard: The standard chessboard size is 8x8 squares. Each square should be of equal size to ensure uniformity. The total dimensions of the board vary depending on the size of each square. Square Size: Typically ranges from 1.5 to 2.5 inches (3.8 to 6.4 cm) per square. For tournament play, a common size is around 2 inches (5 cm) per square. 2.Material: Wood: Commonly used for its traditional aesthetic. Types include maple, walnut, and oak. Plastic: Durable and often used in more affordable or travel sets. Glass: Provides a modern look but can be fragile. Metal: Used for decorative or high-end boards, often paired with metal pieces etc. all complete and as per direction of Engineer-in-Charge. 22 Providing and Supplying of 7 feet long and 3 feet wide washable and toxin free yoga mat of approved make and the yoga mat should be Easily foldable/ roll able and must stay in rolled/ folded position and should not unroll / Unfold itself, etc. all complete and as per direction of Engineer-in-Charge. 23 Providing and supplying Hand Grip of approved make 1. Material: Handles: Typically made from rubber, foam, or plastic for comfort. Springs: Usually made of steel for durability and resistance. Adjustment Mechanism: Some have adjustable springs or resistance levels. 2. Dimensions: Overall Size: Varies, but generally compact and portable. Typical dimensions might be around 6-8 inches in length and 4-5 inches in width. Handle Length: Often adjustable or around 4-6 inches, designed to fit various hand sizes etc. all complete and as per direction of Engineer-in-Charge. 24 Providing and supplying of 75 cm dia GYM BALL of approved make having wall thickness not less than 20 mm and maximum user weight 100 kg or more. The manufacturer should have ISO certified for quality standard, etc. all complete and as per direction of Engineer-in-Charge. 25 Providing and supplying Basketball Hoop Wall Mount Heavy Fibre/ Acrylic Wall Mounting System of approved make and complete Structure made of 2 sq pipe, 1 mt extension with fibre/ Acrylic Boards with 20 mm board etc. all complete and as per direction of Engineer-in-Charge.
