|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Group A (DSR 2018 Rate 717 x 1.0633 = 762.39) |
| 3 | Rewiring forlight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel / PVC conduit including dismantling as required. |
| 4 | Group A (DSR 2018 Rate 416 x 1.0633 = 442.33) |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (DSR-2018) |
| 6 | 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (DSR 2018 Rate 146 x 1.0633 = 155.24) |
| 7 | 2 x 4 sq. mm + 1 x 4 sq. mm earth wire (DSR 2018 Rate 200 x 1.0633 = 212.66) |
| 8 | 2 x 6 sq. mm + 1 x 6 sq. mm earth wire (DSR 2018 Rate 249 x 1.0633 = 264.76) |
| 9 | Supplying and Drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as reqd. |
| 10 | 3 x 1.5 sqmm (DSR 2018 Rate 54 x 1.0633 = 57.41) |
| 11 | 3 x 4 sqmm (DSR 2018 Rate 117 x 1.0633 = 124.41) |
| 12 | S/f offollowing sizes of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 13 | 20 mm (DSR 2018 Rate 84 x 1.0633 = 89.31) |
| 14 | 25 mm (DSR 2018 Rate 90 x 1.0633 = 95.69) |
| 15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.(DSR-2018)(DSR 2018 Rate 495 x 1.0633 = 526.33) |
| 16 | Supplying and fixing following modular switch/socket on the existing modular plate and switch boxincludingconnections butexcluding modular plate etc as reqd. |
| 17 | 5/6 amps switch (DSR 2018 Rate 85 x 1.0633 = 90.38) |
| 18 | 15/16 A switch (DSR 2018 Rate 132 x 1.0633 = 140.36) |
| 19 | 3 pin 5/6 amp socket outlet (DSR 2018 Rate 111 x 1.0633 = 118.03) |
| 20 | 6 pin 15/16 A socket outlet (DSR 2018 Rate 175 x 1.0633 = 186.08) |
| 21 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required(DSR-2018) |
| 22 | 5/6 amps switch (DSR 2018 Rate 45 x 1.0633 = 47.84) |
| 23 | (b)3 pin 5/6 A socket outlet(DSR 2018 Rate 58 x 1.0633 = 61.67) |
| 24 | (c)15/16 A switch(DSR 2018 Rate 110 x 1.0633 = 116.96) |
| 25 | (d)6 pin 15/16 A socket outlet(DSR 2018 Rate 128 x 1.063 3= 136.10) |
| 26 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 27 | Single pole (DSR 2018 Rate 199 x 1.0633 = 211.60) |
| 28 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(DSR 2018 Rate 32 x 1.0633 = 34.02) |
| 29 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 30 | 40 amps (DSR 2018 Rate 339 x 1.0633 = 360.45) |
| 31 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 32 | a)63 A (DSR 2018 Rate 2640 x 1.0633 = 2807.10) |
| 33 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 34 | 3 Module (100mmX75mm) (DSR 2018 Rate 267 x 1.0633 = 283.90) |
| 35 | 4 Module (125mmX75mm) (DSR 2018 Rate 287 x 1.0633 = 305.16) |
| 36 | 8 Module (125mmX125mm) (DSR 2018 Rate 383 x 1.0633= 407.24) |
| 37 | 12 Module (200mmX150mm) (DSR 2018 Rate 434 x 1.0633= 461.47) |
| 38 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. |
| 39 | 3 Module (DSR 2018 Rate 128 x 1.0633 = 136.10) |
| 40 | 4 Module(DSR 2018 Rate 138 x 1.0633 = 146.74) |
| 41 | 8 Module(DSR 2018 Rate 196 x 1.0633 = 208.41) |
| 42 | 12 Module(DSR 2018 Rate 227 x 1.0633 = 241.37) |
| 43 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 44 | 8 way , Double door (DSR 2018 Rate 1760 x 1.0633= 1871.40) |
| 45 | 12 way , Double door (DSR 2018 Rate 2053 x 1.0633= 2182.95) |
| 46 | 16 way, Double door (DSR 2018 Rate 2453 x 1.0633= 2608.27) |
| 47 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.(DSR 2018 Rate 5308 x 1.0633= 5643.99) |
| 48 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.(DSR 2018 Rate 44 x 1.0633= 46.78) |
| 49 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)(DSR 2018 Rate 39 x 1.0633 = 41.46) |
| 50 | S/I/T/C of 4 feet nominal size LED batten having polycarbonated diffuser colour temperature 6500K having wattage 20 W suitable to operating voltage of 140 to 270 volt with protection class IP 20 directly on ceiling/wall/i/c connections with with 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable complete etc as required with 01 year warranty. (MR). |
| 51 | P/I/T/C of 25W LED energy saving street light luminaire made up of aluminium alloy housing with acrelic cover IP-66 on the existing bracket and connection with suitable copper conductor wire complete as required. |
| 52 | S/I/T/C of 45 Watt LED energy saving street light luminaire made upof pressure dia castaluminimum housing with high efficiency LED as lighting source withIP-66 protectionon the existing bracket complete as required with 01 year warranty.(MR) |
| 53 | S/I/T/C of 1200 mm sweep 100 % copper winding ceiling fan complete with capacitor and minimun speed of 380 RPM, double ball bearing stantdard size of down rod, canopies, three nos. Blade made of Anti corrosive aluminium alloy suitable for operation on single phase 230 watt AC 50 Hz i/c connection with 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable(without regulator) complete etc as reqd with 01 year warranty.(MR) |
| 54 | S/f of 2.5 mfd condenser for ceiling fan suitable to operate on 230 Volt 50HZ single phase AC Supply etc as reqd.(MR) . |
| 55 | Removing & Dismentling the burnt winding of ceiling fan and rewinding the same with help of suitable copper wire, paper, sleeve pipe , thread and lead wire and change of bearings, capacitor complete in all respect & fixing the same on site, etc as reqd.(MR) . |
| 56 | Supply & fixing of Exhaust fan of sweep size 300mm ,speed 1200-1400 rpm suitable to work on 220/240v ,50 Hz A.C supply ,ISI certified heavy duty 100% copper winded motor with double ball bearing ,corrosion protectionand with rust proof body and blades complete etc.as reqd with 01 year warranty.(MR) |
| 57 | Repairing, rewinding and replacement of defective parts etc as required,of burnt out size of 300mm exhaust fan from different sites then reinstallation testing commissioning of them at same uninstalled sites. |
| 58 | Lifting of submersible pump set 1.5 to 3.00 HP single phase/3 phasefrom existing borewell with all accessories complete etc. as required. |
| 59 | Lowering of submersible pump set 1.5 to 3.00 HP single phase/3 phaseinto the existing borewell with all accessories complete etc. as required. |
| 60 | Supplying and fixing of 3x4 sqmm size PVC insulated and PVC sheathed copper flat submersible cable suitable for working in 220 - 240 v AC supply with 50 Hz frquency complete etc as reqd.1.1kV conforming to IS:694. ISI Mark |
| 61 | Repairing of Pump of Single phase 1 HP Submersible p/set i/c replacement of defective parts i.e coupling slleeves, impeller, Diffuser, Suction strainer, inlet and nut bolts i/c cartage to and fro, testing , commission etc. as reqd. |
| 62 | Repairing of 1 HPSingle phase submersible P/set motor i/crewinding of motor replacement of difective parts i/c change of bush, thrust plate overhauling, cartage to & fro. Testing and commissioning etc as reqd. |
| 63 | Repairing of Pump of Single phase 1.5 to 3.00 HP Submersible p/set i/c replacement of defective parts i.e coupling slleeves, impeller, Diffuser, Suction strainer, inlet and nut bolts i/c cartage to and fro, testing , commission etc. as reqd. |
| 64 | Repairing of 1.5 to 3.00 HPSingle phase submersible P/set motor i/crewinding of motor replacement of difective parts i/c change of bush, thrust plate overhauling, cartage to & fro. Testing and commissioning etc as reqd. |
| 65 | Supply and fixing of tested steel wire rope,Const. 6X19, Fibre core, RHOL, Galvanized T.S. 1770 N/sq. mm, Dia 6mm,with PVC etc as required. |
| 66 | Supplying and fixing of 40mm dia GI pipe medium class conforming to IS:1239 Part 1(2004) i/c water tight connection complete etc as reqd. ISI mark |
| 67 | Supplying and fixing of 25 mm dia GI pipe medium class conforming to IS:1239 Part 1(2004) i/c water tight connection complete etc as reqd. ISI mark |
| 68 | Supplying and fixing of 150/200mm dia bore cover for tube well i/c providing nut and bolt etc. as reqd. |
| 69 | S/F of 40 mm dia G.I socket i/c making water tight connection complete etc as reqd ISI mark |
| 70 | S/F of 40 mm dia G.I elbow i/c making water tight connection complete etc as reqd ISI mark. |
| 71 | S/F of M.S. Clamps(set of two pieces) 70 Cm long made out of 50mm X6mm flat suitable for 32/40 mm dia. G.I. pipe with 15 mm size with 4 nos and GI nut bolts complete etc. as required. |
| 72 | Supply & Fixing of control panel suitable for single phase 1.5HP/1.1kW capacity submersible pumpset with ON/OFF switch Push Buttton type along with indicators,suitablestarting and running capacitor withoverload relay,digital display for current and Voltage and MCB for Overload & short circuit protection i/c complete connection etc as required. |
| 73 | Supplying & fixing R.C.C.B. Enclosure suitable for double pole (Single phase and neutral) 240 V residual current circuit breaker (RCCB) etc as required.(MR) |
| 74 | Supplying installation testing and commossioning of 10 watt energy saving wall /ceiling mounted LED bulk head having Polycarbonate housing, color temp. 6500K, lumen output >75lm/W, IP 65 rating complete with connection etc. as required. (MR). |
| 75 | S/F phenolic laminated sheet 3mm thick complete with cutting, fixing etc as reqd MR (Super Hylam ISI mark) |
| 76 | Supply of following submersible pump set as required duties of pumpset as under :-a) Medium-Clear Water b) Head range-37-71Mtr.c) Discharge range-6-2 M3 / Hr. d) Delivery dia -40 mm e) Pumptype - water cooled.f) Motor detail-1.1 KW/1.5HP, Copper winding with copper rotor, Suitable for operational on 220 V , 50 Hzsingle phase AC supply etc as reqd with 01 year warranty. (MR) |
| 77 | Supply of followingborewell submersible pump set as required duties of pumpset as under :- a) Medium-Clear Water b) Head range-50-16Mtr. c) Discharge range- 10-95Lpm. d) Delivery dia - 32 mm e) Motor detail-0.75KW/1 HP, Copper winding with copper rotor, Suitable for operational on 220 V , 50 Hzsingle phase AC supply etc as reqd with 01 year warranty. (MR) |
| 78 | Supply of following submersible pump set as required duties of pumpset as under :- a) MediumClear Water b) Head range -71-136Mtr. c) Discharge range- 6-2 M3 / Hr. d) Delivery dia - 40 mm e) Pumptype - water cooled.f) Motor detail-Copper winding with copper rotor, 2.2 KW/3HPSuitable for operational on 220 V , 50 Hzsingle phase AC supply etc as reqd with 01 year warranty. (MR) |
| 79 | Supply of power cableof size 3c x 6 sq.mm aluminium conductor , XLPE insulated, PVC sheathed four core armoured cable etc. as reqd.(MR)( |
| 80 | S/f wall mounted Sintex MC box of size ID -200x140x95 mm model GSJB - 2014 single door side hinged made out of sheet moulding compound dust & water proof openable front cover with locking arrangement and 2 nos 4 way copper connectors 20 amps rating i/c insulators & wiring with 1.5 sq mm. PVC CU single core wire etc completed with interconnection. (MR) |
| 81 | Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 82 | Supplying and fixing single module stepped type electronic fan regulator on the existing modular/ phenolic laminated plate/switch box including connections but excluding modular/laminated phenolic plate etc. as reqd. |
| 83 | Rebate on dismantalled4 feet \ 20(W)LED batten fitting |
| 84 | Rebate on dismantalled25 ( W )LED |
| 85 | Rebate on dismantalledBulk Head |
| 86 | Rebate on ceiling fan |
| 87 | Rebate on Exhaust fan |
| 88 | Rebate on dismantalled wiring with allied material. |
| 89 | Rebate on dismantalled Control panel board |
| 90 | Rebate on dismantalled submersible pump set 1-3 HP |
