Construction Of 100 Kva, 11/0.4Kv S/Stn A/W 3-Phlt Line To Prov. Sop To Bpcl For Installation Of Ev Charging Station At M/S Shaheed Deep Filling Station On Partial Turnkey Basis Under Esd Hpsebl Bhareri. Ed Barsar- 1 100, KVA,11/0.4KV Distribution Transformer conforming to ISI & BEE Specifications. 2 9Mtr. Long ISI marked, Swaged Steel Tubular poles as per IS:2713 / 1980 (Part-I-III) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32. 3 RCC Muff 2000mm Long withconcrete filling 4 MS Channel Iron X-Arm, [Size (100x50x6)mm, Length : 2800 mm x 2 Nos] forIncomer Line. 5 MS Angle Iron (50X50x6 mm), Length: 2800 mm x (1 Nos for LAs ). 6 MS Channel Iron X-Arm:[Size (75x40x6)mm, Length : 2800 mm x 4 Nos] supporting DO fuse unit & GO switch. 7 MS Channel Iron X-Arm, [Size (100x50x6)mm, Length : 2800 mm x 2 Nos] for Transformer Bed. 8 MS Channel Iron X-Arm:[Size (100x50x6 mm), Length : 460 mm x 2 Nos] for supporting Main Channel of Transformer]. 9 MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos. for Belting of Transformer 10 MS Angle Iron (35X35x6 mm), Length : 460 mm x 2 Nos for supporting Belt X Arms. 11 MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracings. 12 MS Angle Iron (50X50x6 mm), Length: 2800 mm x ( 2 No. for LT Distribution Panel Box). 13 MS Angle Iron (50X50x6 mm), Length: 450 mm x 1 Nos. 14 Prov. 11KV CT-PT (1 Unit,11 KV/110 V; CT 3no 10/5A) 15 GO Switch Handle Supporting (Channel Iron (75x40x6mm) Length:460mm 16 GO AB Switch Unit (11KV, 400A,25KA) Tripple pole O/D type 17 D.O Fuse Unit 18 Surge Arrester, 9 kV Station Class(Porcelain Type) 19 Discs insulator sets (comprising 1 No. Disc: (Porcelain Disc Insulator BS, 12 kV, 90 kN) including Ball Cleave, Bend Stapple, Dead End Clamps etc.) 20 Stay Set Complete i/c Guy Assembly and Helicallyfittings) 21 Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) 22 Sub-Station Pipe Earthing Set 23 6 SWG GI wire for Earthing 24 LT Distribution Panel Box suitable for 100KVA, 11/0.4KV (Outdoor type) Sub-Station transformer comprising of 01No. 3Pole MCCB, 160 Amps, 35KA,4P ICS = 100% ICU, KIT.KAT 200Amps Capacity equipped with Phase indicator lamps, 3phase Volt & current measuring equipment, Panel Box is duly painted powder coated paint complete in all respect as per HPSEBL/REC specifications comprises of following items (ACB & MCCB of make Schneider/L&T/ABB). 25 Half Clamp made of MS Flat 50x6mm 26 Full Clamp made of MS Flat 50x6mm 27 M./S Nuts & Bolts of various sizes (Galvanised / Coated) [Preferably 16mm² or more (with flat and spring washers)] 28 Aluminium Thimble 29 Copper Thimble 200Amp 30 Danger Plate 31 Barbed Wire 32 LT Cable (3.5 Core) 120mm² 33 3- Phase, 3/4- wire CT- PT operated Static Trivector Meter 34 Aluminium Paint. 35 Red Oxide 36 LT LINE : AAAC 7/3.15mm (50mm²) conductor{Includes 3 conductor lengths for 3Φ and additional 1% (Sag, Jumpering and wastage} . 37 8Mtr. Long ISI marked, Swaged Steel Tubular poles as per IS:2713/1980 (Part-I-III) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-14.. 38 RCC Muff 2000mm Long withconcrete filling material 39 Prov. Channel Iron (75x40x5) [Length-1.50 Mtr + 0.2 Mtr] 40 Shackle Insulator (16 kN) 41 D-Iron (U- Clamps)made of MS Flat 50x6mm. 42 Earh Knob 43 LT Stay Set Complete i/c Guy Assembly and Helicallyfittings) 44 Stay wire 7/3.15 mm (6.00 kg. per stay set) 45 Stay Clamp / Full Clamp made of M.S. Flat of size (50 x 6mm). 46 Half Clamp made of MS Flat 50x6mm 47 Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengthsand Additional 1% (Sag and wastage)}{0.102 kg/m} 48 Nuts and Bolts of various sizes (Galvanised / Coated) [Preferably 16mm² or more (with flat and spring washers)] 49 Red Oxide 50 Aluminium Paint 51 Erection of11/0.4KV, 100KVA Sub-Station Structure using Steel Tubular Poles a/w RCC Muff & its concrete filling as per latest standard practices /specification of REC / HPSEBL including digging of pits, erection of Poles & Muffs, Filling muffs with PCC mixture, re-filling of pit & ramming, drilling of holes in Cross X Arms, Preparation of Plateform Structure Members MS Channel X Arms and Knee Bracing Sets, Erection of Plateform, fixing of M.S. Cross Arms S/Stn fitting, Painting of Complete structure with red oxide paint & then alluminium paint, fixing ofGO Switch, DO fuse units, Lightening Arrestors, Disc Insulators, Pin Insulators, LT Ditribution Panel, Energy Meter. Erection of S/Stn. Pipe Earthing Set (3Nos.) complete in all respect including providing Char Coal, Salt etc.,Erection of Transformer, Providing Earthing Connection to GO Switch, Transformer Lighteneing Arrestor etc. Erection of Stay Sets (2 Nos.), Erection of LT Cable and fixing of jumpers. Testing and commissioning of Transformer and allied equipments complete in all respect. 52 Providing and fixing of GI Chain link febric fencing 6.6 Mtrx 3.8 Mtr x 2Mtr of required width in mesh size 50x50mm fencing with Gate of of size 1x2Mtr made of MS Steel angle Ironincluding providing of material i.e. i) 0.40Cum Concrete 1:4:8, ii) 68Kg Structural steel work in single section iii) 83.73Kg Steel work welded in built up section iv) 41.60 m²- GI Wire mesh 50x50mm ,4mm dia wireincluding Painting with synthetic enamel paint of approved brand& erection etc complete in all respect. 53 ERECTION OF LT LINE :Erection of LT Pole structure with Steel Tubular Pole 8mtr. Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for pole, muffing of pole, erection of poles, refilling of pit & ramming , drilling of holes in pole and X-arm, fixing of X-arm, Shackle Insulators and painting of structure with Redoxide Primer & Aluminium Paintetc.Complete in all respect as per the standard practices / specifications of the REC /HPSEBL. 54 Erection of Stay Set (LT) as per latest standard practices /specification of REC / HPSEBLincluding digging of pit (size0.9*1.20*1.33),fixing of Stay Rod, filling and ramming of pit, nozzelling and tightening etc. complete in all respect. 55 Laying of Conductor, Stringing, Sagging ofAAAC, 50mm² ,7/3.15mm² and binding with Insulators (3 wires) and fixing of jumper. 56 Erection Charges of fixing of Jumpers of 11Kv line as per latest standard practices /specification of REC / HPSEBL (Per Set). 57 Local Transportation Charges for the carriage material by road & through manual carriage to the site of work for 1Nos 100KVA,11/0.4KV Sub-Stations and their associated HT/LT Lines. (Complete Job) 58 Testing fees & Commissioning Charges etc. for 1No. 100KVA,11/0.4KV Sub-Stations a/w associated HT/LT Lines & HT Metering Equipment. (Complete Job).(as per Schedule of General & Service Charges & HP Govt. Notification) 59 Labour Cess (@ 1%of thetotal amount of the supply, erection, testing & commissioning of 1Nos., 100KVA,11/0.4KV Sub-Stations and their associatedHT/LT Lines. etc. (for complete Job).
