Tender For Supply And Delivery Of Cesspool Tanker (Suction Cum Jetting Machine) Of 6000 Litre Capacity - Bsvi With Chasis For Oddanchatram Municipality Under Sbm 1.0 (U), oddanchatram-Tamil Nadu

Supply And Delivery Of Cesspool Tanker (Suction Cum Jetting Machine) Of 6000 Litre Capacity - Bsvi With Chasis For Oddanchatram Municipality Under Sbm 1.0 (U) , Supply And Deliveryof Cesspool Tanker -6000 Litre Capacity For Following Sepcification As Below (Rate Is Inclusive Of Gst) , Features : Vaccum Pump -Type-Rotary Sliding Vane, Cooling -Air Cooled, Drive - Chasis Side Pto Tank: Tank Rear Door Opening-Manual, Tank Tipping /Angle-Not Applicable, Moc-Is:2062 Gr.B, 4-6Mm Thickness, Thickness Of Tank Plate Of Ss 304 With Proper Reinforcement To Withstand The Required Forces -6Mm, Construction-Cylindrical, Shell With Torispherical Dished Ends, Suction Hose-Dia/Length/Qty-43 Mtr / 6 Nos, Sludge Suction & Drain Valve-Size-4, Type-Knifegate/Ball Valve Of Reputed Make, Hyd.Pump-Type-Yes-Reputed Make,Drive- Yes-Reputed Makecapacity : Tank:Volume-Water Storage Tank-1000Ltr, Sludge Storage Tank-5000 Litre Vacuum Pump: Make- Reputed Make, Flow / Vaccum-500-550 Cum/Hr/90% Jetting Pump : Working Pressure-130-160 Bar, Hose Length-100-150M, Size-3/4Dia, Water Flow For Pump Of Jetting Machine-100-153 Lpm, Minimum Burst Pressure Of Jetting Hose-500-520 Bar, Maximum Working Pressure Of Jetting Hose-200-220 Bar Safety : Water Level Indicator -Type/Qty-Tube Type /02 Nos Pressure Relief Valve -Size/Qty-2/1 No Vacuum Relief Valve-Size/Qty-1.5/1 Nos Mounting : Chasis : Gross Vehicle Weight (Gvw) -12 Ton, Emissions Norms :- As Per Local Rto, Chasis Engine Output : Min 90 Hp, Drivers Cabin Type : Single (Day) Cabin, Make : Ashok Leyland/Tata/Eicher/ Equivalent With Pto With Emission Normsbsvl , Make /Model/Wb/Hp/Side Pto Provision: Any Other Equivalent Model Of Other Chasis Manufacturers. Scope - Customer Side Pto Provision - Provision Requireddimensions :Equipment Equipment Length -4500-5150Mm Approx Equipment Height -1500-2200 Mm Approx Overall Width -2000-2250Mm Approx Overall Length -3000-3500Mm Approx Equipment Rear Overhang-600-1600Mm Approx Painting -Surface Preparation And Finish Equipments Exterior -Spray-Painted With Two Coats Of Superior Quality Anti-Corrosive Primer And Two Coats Of Enamel Metal Paint. Colour Code Will Be As Per Customer / Tender Requirements Tanks Interior - Coated With 2 Coats Of Superior Quality Anti-Corrosive Grey Epoxy Paint (Rate Quotedshould Be Inclusive Of Gst)

Refer document

INR 43500.0 /-

Refer document