Tender for Digital Indicator With Transmitter, bangalore-Karnataka

Supply Of Digital Indicator With Transmitterdigital Indicator With Transmitter,Digital Indicator With Transmitter As Per The Specification Mentioned Below: 1. Auxiliary Input Supply: 230 Vac, +/- 15%, 50/60Hz. 2. Input Signal: Disposable Thermocouple K,R,S And B Type.(Factory Set Stype T/C). 3. Design: Microprocessor/Microcontroller Based Design. 4. Application: Temperature Measure Ment For Molten Metal Through Disposable Thermocouple. 5. Range: Full Positive Range Of The Selected Input, S Type: 0 To 1768 Degree C. 6. Accuracy: Within +/- 0.1% Of The Range, Including Cold Junction Compensatio N. 7. Resolution: 1 Degree C / 1 Degree F (Factory Set To Degree C). 8. Cold Junction Compensation: Automat Ic, Built In Sensor From 10 Degree C To 60 Degree C. 9. Display: 4 Digit, Height: 2 Inch & Seven Segment Red Led Display. 10. Measurement Time: 2 To 9 Seconds (User Programmable). 11. Plateau Detection: 0.1 To 99 Degree C (User Programmable). 12. Indication: Led/Pilot Lamp At Front Panel For Various Functions. 13. Audi O/Visual Indications: For Thermocouple Continuity, Measurement In Progress And Measurement Completed U Sing The Built In Indicator And Hooter. 14. Retransmission Output: 4-20Ma (Analogue, Scalable) Proportional To The Measured Temperature, Load Resistance Max 600 Ohms. 15. Relay Output: Four Relays - 1 C/O, Poten Tial Free Contacts For Driving Remote Audio & Visual Indicator. Relay Contacts Are Rated For 5A @ 230 Vac. 16 . Data Storage: Readings Of Measurements Are Stored In The Memory, Which Can Be Retrieved On Demand At Instrument And Computer. 17. Communication/Interfacing: Serial Communication Rs 485 - 2 Wire For Remote Display & Computer Interface Through Usb. Required Software To Be Supplied Along With The Equipment. 18. Communication Port: Ethernet - Rj45, (Rj45 Port Shall Be Provided Within The Equipment). 19. Operating Co Ndition: Ambient Temperature Up To 50 Degree C, Steel Foundry & Dust Environment. 20. Enclosure: Fabricat Ed With Sheet Metal (C

Refer document

Refer document

Refer document