Supply And Fixing Of Furnitures In Revenue Inspectors Training Institute Riti Building At Revenue Officers Training Institute, Gothapatna, Bhubaneswar For The Year 2024-25 In The District Of Khordha , Furnitures , Modular Table In Completely Knock Down Conditions With An Overall Size 2100Mm X 1800Mm X 750Mm That Is To Be Assembled At Site. The Top Shall Have The Size 1900Mm X 900Mm Made Up Of 45Mm Thickmdf Board Grade Ii Is:12406 Latest With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On 75Mm Peg Mounted Over Side Storage Unit And Fixed Pedestal. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 45Mm Thick Pre-Laminated Mdf Board Grade Ii Is:12406 Latest And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Shall Be 18Mm Thick Pre-Laminated Mdf Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 1800Mm X 510Mm X 625Mm. The Side Unit Shall Be Made Up Ofmdf Board With Top And Side 45Mm Thick And Drawer Base 9Mm Thick & Other Parts 18Mm Thick Like Shutter, Back, Facia, Etc. It Shall Have 3 Drawer And 2 Sliding Shutter. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Hanging Pedestal Shall Be Provided With An Overall Size 455Mm X 685Mm X 485Mm. The Pedestal Shall Be Made Up Ofmdf Board. Pedestal Side, Back, Facia Shall Be 18Mm Thick & Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 2 Nos. Of Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Sliding Channels To Enable Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. Make- Geeken. / Godrej / Wipro/ Feather Lite , High Back Chairs.Seat And Back Made Of Hot Pressed 18Mm Thick Wooden Ply Upholstered With Pu Foam Denisty 40 Kg/M3 In Seat & Pu Foam Denisty 32 Kg/M3 In Back And Leatherite Tapestry.The 360 Degree Revolving Mechanism Will Be Torsion Bar Type With Single Locking Point.Armrest Are Made Of Silver Pp Metal And Base Is Also Made Of Silver Pp Metal Fitted With 5 Nos. Twin Wheels/Castors.The Pedelstal Is Of 66.0 Cm Pitch Centre And Twin Wheels Castors Having 5.0 Cm Pitch Centre Are Injection Moulded In Black Nylon.Seat Will Be Height Adjustable 65Mm By Gas Lifter Work In Bifma Standard Class 3 With Covered Pp Cover.Seat Size Shall Be- 20(Depth),21(Width) And Back Height From Seat -27. Overall Height -45.Make- Geeken / Godrej / Wipro/ Featherlite , Visitor Chair. The Seat & Back Are Made Of 12+6 Mm Thick Twin Wooden Ply Upholstered With Foam Density 40Kg/M3 In Seat And Foam Density 32Kg/M3 In Back With Leatherite Tapestry. The Seats Main Frame Made Of Chrome Plated Crca Pipe Dia 20.38Mm X 2Mm Thick. There Are Use Of Ppcp Shoes In The Bottom Of Frame For Avoid Streches On The Floor.Seat Size Shall Be- 20 (W) X 19 (D) And Back Height Shall Be 20.5 From Seat & Overall Height: 37.5From Floor. Make - Geeken / Godrej / Wipro/ Featherlite , Sofa-Providing And Placing Sofa Inner Frame,Basic Structure Made Of Marandi Hard Wood And Commercial Ply Frame With Upholstery 40Kg/M3 , 100 Mm Thick Of Foam In Seat And 32Kg/M3, 50 Mm Thick Of Foam In Back Foam Leatherite Tapestry With 1+/-.1 Mm And Leg Stainless Steel 202 Grade Pipe Size 38Mm/1.5 Mm Thick With Pvc Shoe . Overall Size1450x760x750(Lxdxh) 2 Seater,Make - Geeken / Godrej / Wipro/ Featherlite , The Center Table Main Frame Is Made Of Ss Pipe 202 Grade Size 40X10x1.5Mm Thick Is Welded With Tig Welding And Finishing In Bright Finish. Table Top Is Made Of Prelaminated Particle Board 18Mm Thick Is Fix In Ss Frame. The Pvc Shoes Are Place In The Bottom Of Frame. Table Size 900X600x440 Mm. Make- Geeken / Godrej / Wipro/ Featherlite , Wooden Hanging Rack Shelf Wall Shelf. Crafted From 19Mm Thick Mdf Board Boasts Durability. No Of Shelves 3, Heavy Duty, Mounting Type- Wall Mount, Type Of Shelf- Floating, Dimensions- W750mm X D150mm X H700mm. Make- Geeken / Godrej / Wipro/ Feather Lite , Modular Table In Completely Knock Down Conditions With An Overall Size 1500Mm X 1650Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Mdf Board Grade Ii Is:12406 Latest With Approved Laminate And Finish As Per Approved Shade. The Side Top Shall Have The Size 900Mm X 450Mm X 750Mm With 25Mm Thick Mdf Board. The Table Top Profile Shall Be In Rectangle Shape With One Side Round And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Mdf Board. The Trey Shall Be Operated On Keyboard Channel. The Table Top And Side Top Shall Be Supported Over Mdf Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Mdf Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Mdf Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm The Pedestal Shall Be Made Up Of Mdf Board . Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. A Movable Type Cpu Unit Shall Be Provided. It Should Be Made Up Of 18Mm Thick Mdf Board. Make - Geeken / Godrej / Wipro/ Feather Lite , Medium Back Chairs.Seat And Back Made Of Hot Pressed 18Mm Thick Wooden Ply Upholstered Withfoam Denisty 40 Kg/M3 In Seat & Foam Denisty 32 Kg/M3 In Back And Leatherite Tapestry.The 360 Degree Revolving Mechanism Will Be Swievel Tilt With Single Locking Point0. And Armrest Are Made Of Polyproplene With Silver Finishing.Base Ismade Of Silver Mettalic Finished With Nylon Five Star With Superior Nylon-6/Ultramid -56Twin Wheel Castorshaving Self Lubricating Properties For Friction Free Movement Tested.The Mechanism Is Swievel Tilt With Single Point Locking. The Seat Height Adustment With Bifma Standard Class 3 Gas Lift.Seat Size Shall Be- 20(Depth),21(Width) And Back Height From Seat -20. Overall Height -37. Make - Geeken / Godrej / Wipro/ Feather Lite , Visitor Chair. The Seat & Back Are Made Of 12+6 Mm Thick Twin Wooden Ply Upholstered With Foam Density 40Kg/M3 In Seat And Foam Density 32Kg/M3 In Back With Leatherite Tapestry. The Seats Main Frame Made Of Chrome Plated Crca Pipe Dia 20.38Mm X 2Mm Thick. There Are Use Of Ppcp Shoes In The Bottom Of Frame For Avoid Streches On The Floor. Whole Seat Quality Meet At The Bifma Standard Class Iii. Seat Size Shall Be- 20 (W) X 19 (D) And Back Height Shall Be 20.5 From Seat & Overall Height: 37.5From Floor. Make - Geeken / Godrej / Wipro/ Feather Lite , Steel Almirah, Generally Confirming To Bis Specification Is: 3312:2021, 2 Doors, 2 Adjustable Shelf, Thickness 0.8Mm, Crca Sheets Confirming To Grade Cri Of Is 513 (Part-1):2016, Cam Lock With Lock Lever, Finish Coat With Enamels Is Confirming To Is 2933 (Part-1), Powder Coating With 50 Microns Thickness Minimum 2 Doors, 4 Adjustable Shelf, Thickness 0.8Mm2 Doors, 2 Adjustable Shelf, Thickness 0.8Mm, 18 Mm Thick Plpb Egde Banded Top, Size : W900 X D450 X H930, Make- Geeken / Godrej / Wipro/ Feather Lite , Executive Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Mdf Board Of Grade Ii Of Is 12406 Latest With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. . The Understructure Shall Consist Of Ms/Crca 0.8Mm Thick Sheet Profile.Bottom Frame Is Made Up Of Crca. I - Legs Are Made Up Of 0.8Mm Crca Sheet. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. It Should Have 2 Nos. Of Drawer I.E. 1 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel Made Up Of Crca 0.8Mm Thick Duly Powder Coated.There Shall Be Leveller Provided At The Bottom. Make- Geeken / Godrej / Wipro/ Feather Lite , Medium Back Chair. The Back Is Made Of Poluproplene And Upholstered With Mesh Or Breathable Fabric Tapestry. The Seat Is Made Of 12Mm Thick Wooden Ply & Pu Foam Density 40+/-2 Kg/M3 Upholster With Fabric Tapestry. Seat And Back Joint Togetherand Mechanism Will Be Provided Swivel Tilt With One Point Locking And Armrests Are Made Of Polypropylene. The Pneumatic Seat Height Adjustable 100 Mm In Bifma Standard Class 3 .Pedestal Is Made Of Injection Moulded Black Nylon Fitted With 5 Nos. Twin Wheels Castors Which Are Made Of Injection Moulded Black Nylon 30% Glass Filled And Nylon Base Is Load Tested Capacity -1150 Kg In Bifma Standard. Seat Size Shall Be- 18 (W) X 18.5 (D) And Back Height Shall Be 18.5 From Seat & Overall Height: 33.5From Floor. Make- Geeken / Godrej / Wipro/ Feather Lite , Steel Almirah, Generally Confirming To Bis Specification Is: 3312:2021, 2 Doors, 4 Adjustable Shelf, Thickness 0.8Mm, Crca Sheets Confirming To Grade Cri Of Is 513 (Part-1):2016, Cam Lock With Lock Lever, Finish Coat With Enamels Is Confirming To Is 2933 (Part-1), Powder Coating With 50 Microns Thickness Minimum 2 Doors, 4 Adjustable Shelf, Thickness 0.8Mm2 Doors, 4 Adjustable Shelf, Thickness 0.8Mm, Size : 915 X 485 X 1980, Geeken Make / Godrej / Wipro/ Feather Lite , Conference Table, Mdf Top, (Without Flip-Up Box), Size : W4800 X D1500 X H750. Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 4800Mm X 1500Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix, Dowels, Pins And Brackets. The Worktop Shall Have The Combination Of Mdf Board. The Main Top Should Be Made Up Of Back To Back 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And The Base Top Shall Be Made Up Of 25Mm Thick Medium Density Fibre-Board With Deco Matt Finish. The Table Top Profile Shall Be Boat Like Shape With Round Corners. The Edges Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius And The Base Top Shall Be With Half Round Post Form With Grooves. Single Sided Flip-Up Box Should Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. Wire Carrier Shall Be Provided Below The Table Top For Power Connection Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. The Table Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side And Mid Shall Be Topped By Gable End. It Should Be Made Up Of 36Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. Make- Geeken / Godrej / Wipro/ Feather Lite , Visitor Chair,Back Is Made Of Polyproplene Outer Side And Upholstered With Nett Or Breathable Mesh With Abs Support.Seat Is Made Of Hot Pressed 14 Mm Thick Moulded Wooden Ply And Upholstered With Pu Foam Denisty 40+/-2 Kg/M3 In Seat & Fabric. The Seat Frame Is Made Of Powder Coated Crca Capsule/ Elliptical Shape Pipe Size 20Mm X 10Mm X 1.6Mm Thick. And Arms Rest Are Made Of Polyurethene.Pvc Shoes Are Insert Into Bottom Of Frame. Seat Size Shall Be 19 (Dp.)X 20(Br.) And Back Height From Seat 18.5.Overall Height - 34.5(Inch.)., Make- Geeken / Godrej / Wipro/ Feather Lite , Steel Library Rack, Thickness 0.8Mm, Size : W940 X D600 X H2110,Providing, Supplying And Placing Double Side Steel Library Racks In Perfectly Upright And Straight Position. The Overall Size Of The Rack Shall Be 940Mm (W) X 600Mm (D) X 2110Mm (H). The Rack Shall Be Supplied With 4 Nos. Of Adjustable Shelves On Both Side I.E. 10 Loading Levels. Rack, Side Panel, Skirting Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Side And Top Shall Be Covered With 18Mm Thick Mdf Board Of Grade Ii Of Is 12406. The Edges Of The Board Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Add-On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel. The Shelves Shall Be Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 80Kg Maximum. Each Shelf Shall Be Provided With Stiffener At Bottom For Strength And Back Stiffener For Separator Between Front And Rear Shelf. All Steel Components Shall Be Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. Make- Geeken / Godrej / Wipro/ Feather Lite , Steel Library Rack, Thickness 0.8Mm, Size : W915 X D485 X H1830,Providing, Supplying And Placing Double Door Glass Racks In Perfectly Upright And Straight Position. The Overall Size Of The Rack Shall Be W915 X D485 X H1830. The Rack Shall Be Supplied With 5 Nos. Of Adjustable Shelves. 10 Loading Levels. Rack, Side Panel, Skirting Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 80Kg Maximum. Each Shelf Shall Be Provided With Stiffener At Bottom For Strength And Back Stiffener For Separator Between Front And Rear Shelf. All Steel Components Shall Be Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. Make- Geeken / Godrej / Wipro/ Feather Lite , Medium Back Chair. The Seat Size Shall Be 485Mm (W) X 460Mm (D), The Back Height Shall Be Mm 560Mm And Overall Height- 1000Mm. The Seat Shall Be Made Of Hot Pressed 15Mm Thick Moulded Ply And Upholsteredwith Urethane Foam Foam Density 40Kg/M3 & Net Fabric Tapestry. The Back Is Made Of Polyproplene Outer Side And Upholstered With Nett Or Breathable Mesh With Cushioned Support. The Armrests Are Made Of Polyproplene And Mechanism Shall Be Knee Tilt With Four Point Locking.The Pneumatic Height Adjustment Shall Have An Adjustment Of 63Mm In Bifma Standard Class 3.Pedestal Is Made Of Injection Moulded Black Nylon Fitted With 5 Nos. Twin Wheels Castors Which Are Made Of Injection Moulded Black Nylon 30% Glass Filled And Nylon Base Is Load Tested Capacity -1150 Kg In Bifma Standard. Swivel Tilt, Make- Geeken / Godrej / Wipro/ Feather Lite , Dining Table, S.S. Pipe Frame, The Body Is Made Of Crca Steel Sheet With A Thickness Of 18 Swg (Gauge), Following The Is-513 1994 Standard Along With Ss Sheet Of 202 Grade. The Table Can Withstand A Salt Spray Test Of 1000 Hours As Per Is 101.The Scratch Hardness Is 3 Kgs According To Bs-3900-Part E2 1970 And Is-101. Size In Mm- 1800 X 900 X 750, Make- Geeken / Godrej / Wipro/ Feather Lite , Dining Table, S.S. Pipe Frame, The Body Is Made Of Crca Steel Sheet With A Thickness Of 18 Swg (Gauge), Following The Is-513 1994 Standard Along With Ss Sheet Of 202 Grade. The Table Can Withstand A Salt Spray Test Of 1000 Hours As Per Is 101.The Scratch Hardness Is 3 Kgs According To Bs-3900-Part E2 1970 And Is-101. Size In Mm- 1200 X 900 X 750, Make- Geeken Size In Mm - 1200 X 900 X 750, Make - Geeken / Godrej / Wipro/ Feather Lite , Café Chair, Without Arm, Seat And Back Are Made Of 6Mm Thick Polyproplene Shell. And Bottom Is Made Of Crca Pipe Dia. 19.05Mm X 1.6 Mm Thick Legs Two Numbers Are Bend In C Shape And Joint With Two Numbers Tie Pipe Size 19.05Mm X 1.6 Mm. The Pp Shell Is Fitted With Cap Nut And M6 Bolt. There Ppcp Shoes Are Available In The Bottom Of Frame For Avoid Skretch On Floor.Seat Size-17.5”(W)16.5”(D) Back Size-15(H) From Seatand Overall Height From Floor -32.5.Make- Geeken / Godrej / Wipro/ Feather Lite , Rack Of Size : 72W X 18D X 96H,Nos Of Compartments/Shelves (Top/Celling Shelf - Not To Be Counted): - 5 Nos, 1.2Mm Thick Ms Sheet Confirming To Commercial Quality Cr-1, Grade 340 Of Is 513, Depth In Mm ( + 5Mm) 450Mm, Width( + 5Mm) 1800Mm, Height( + 5Mm) 2400Mm, Gauge- 18,Paint : - Powder Coated With 120Microns Having Ms Sheet 1.2Mm Sides, Back & Partition Wall Thickness (In Mm). Having Square Ms Angel Posts Of 35 X 5. Understructure Of Shelves 1.0Mm Supporting Bar Having 3 Sides 0.8Mm Thick Bar. Leg Should Be 35Mm X 5Mm Flat. Sheet Angle Should Be 30 X 5 Flat.Rack Weight-170-180Kg Approx. Side Supporting Angle Should Be 25 X 5 Flat. Make- Geeken / Godrej / Wipro/ Feather Lite , Rack Of Size : 48 X 36 X 96, Nos Of Compartments/Shelves (Top/Celling Shelf - Not To Be Counted): - 5 Nos, 1.6Mm Thick Ms Sheet Confirming To Commercial Quality Cr-1, Grade 340 Of Is 513, Depth In Mm ( + 5Mm) 900Mm, Width( + 5Mm) 1200Mm, Height( + 5Mm) 2400Mm, Paint : - Powder Coated With Pigeon Holes Having Ms Sheet 0.8Mm Sides, Back & Partition Wall Thickness (In Mm). Having Square Slotted Angel Posts Of 1.6Mm. Understructure Of Shelves 1.0Mm Supporting Bar Having 3 Sides 1.6Mm Thick Bar. Rack Weight-75-85 Kg Approx. Shelves Should Be 1.2Mm. Make- Geeken / Godrej / Wipro/ Feather Lite , Wooden Glass Table Of Size :4 X 3, Understructure Ms Plate Of 0.8Mm Thick, Main Structure Made Up Of Teak Wood With A Glass On Top. Led Lights Must Be Installed In Between Glass & Understructure. 8Mm Plain Glass Should Be Provided On Top For Clear Visibility Of Lights. Make- Geeken / Godrej / Wipro/ Feather Lite , Workstation Table, Panel Based Partition Edge Banded Top, Size : W2580 X D660 X H1200supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 2580Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1200Mm X 600Mm For Individual Seating System Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions (Pre-Treated) And Duly Powder Coated With 40-60? Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways & 4 Ways (L-Cover For Corner, T-Cover For Middle Section Wherever Required). The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm(H) X 60Mm(D) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board (With Fabric) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. Make - Geeken / Godrej / Wipro/ Feather Lite , Workstation Table, Panel Based Partition Edge Banded Top, Size : W1320 X D660 X H1200supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 2580Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1200Mm X 600Mm For Individual Seating System Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions (Pre-Treated) And Duly Powder Coated With 40-60? Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways & 4 Ways (L-Cover For Corner, T-Cover For Middle Section Wherever Required). The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm(H) X 60Mm(D) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board (With Fabric) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. Make - Geeken / Godrej / Wipro/ Feather Lite , Three Seater Sofa, Wooden Frame, Ss Pipe Leg Frame, Seat Back Leatherette Tapestry, Size In Mm - 1780(L) X 755(D) X 740(H) 3 Seaterthree Seater Sofa Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Ss Tube Arm Provided With Shiny Chrome Finish. The Complete Structure Shall Be Upholstered With Maroon Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Be Supported By Loop Leg Pipe Frame Of Ss 202 Grade Having Cross-Section Area 60Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1510±10 Mm(W), Seat Height = 430±10 Mm, Overall Width = 1770±10 Mm, Overall Depth = 760±10 Mm & Overall Height = 750±10 Mm. Make- Geeken/ Godrej / Wipro/ Feather Lite , Centre Table Main Frame Legs Are Made Of Stainless Steel202 Grade Pipe Size 65Mm X 14Mm X 1.5 Mm Thick In M Shape. The Legs Are Joint With Cross Pipe Size 65Mm X 14Mm X 1.5 Mm Thick And Complete Frame Is Welded With Tig Welding & Frame Is Buffed In Bright Finish. The Table Have Two Tintedglass, Top Glass Size 600Mm X 600Mm X 12Mm And Bottom Glass Size 555Mm X 280Mm X 8Mm Thick Fitted With Suction Cap. There Are Ppcp Shoes Are Insert In The Bottom Of Legs For Avoid Skretches From Floor. Size : 1200 X 600, Make- Geeken/ Godrej / Wipro/ Feather Lite , Magazine Rack, Thickness 0.8Mm, Size : W900 X D450 X H1850, The Structure Is Epoxy Powder Coated In Soothing Grey Color And The Reading Tops Are Manufactured From Prelaminated Mdf In Grey Color, To Suit All Contemporary Presentation Environments. All Pipe Ends Are Properly Fitted With Molded Abs End Caps To Give The Product Appealing Aesthetics, Superior Finish And Longevitygeeken Make / Godrej / Wipro/ Feather Lite , Visitor Chair, Seat Is Made Of Hot Pressed 12Mm Thick Plywood & Upholstered With Foam Denisty 40+/-2 Khg/M3,Hardness -16 +/- 2 Kg. Tested On Hampden Machine At 25% Compression In Seat And Fabric Tapestry.The Back Is Made Of Crca Pipe Outer Side And Upholstered With Breathable Mesh. The Chair Designed Without Housing Armrests And Base Stand Is Made Of Silver Powder Coated Crca Pipe Dia 15.88Mm X 1.6Mm Thick And There Are Ppcp Shoes Are Also Available In The Bottom Of Frame. The Pipe Quality Meet To Bifma Standard Class 3. , Make- Geeken/ Godrej / Wipro/ Feather Lite , 3 Seater Sofa With Powder Coated Arms & Legs, Perforated Powder Coated Seat & Back, Size In Mm - 1750(L) X 710(D) X 755(H) Supplying & Placing Three Seater Bench. The Seat And Back Shall Be Made Up Of High Quality Cold Rolled Ms Perforated Sheet Of 1.2Mm Thick, Pressed And Welded To Form The Shape. The Seat And Back Electrostatically Coated With Epoxy Powder And Then Cured Under Heat To Allow It To Form A Skin. The Armrest Shall Be Made Up Of Mild Steel Powder Coated Tube With 1.2Mm Thick. The Base Structure Shall Be Supported By Ms Powder Coated With 40-60? (Dft). There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 440±10 Mm(D) X 405±10 Mm(H) From Ground. Overall Height Shall Be = 775±10 Mm, Overall Depth = 710±10 Mm & Overall Width = 1765±10 Mm.Make - Geeken/ Godrej / Wipro/ Feather Lite , Executive Table, Mdf Board Top, The Top Shall Be Made Up Of 18Mm Thick Mdf Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade,Fixed Metal Pedestal, Metal Frame, The Understructure Shall Consist Of Ms/Crca 0.8Mm Thick Sheet Profile.Bottom Frame Is Made Up Of Crca. I - Legs Are Made Up Of 0.8Mm Crca Sheet.Powder Coated, W1200 X D600 X H750, Make- Geeken/ Godrej / Wipro/ Feather Lite , Linear Workstation, Partition : Consisting 60Mm Thick Aluminium Extruded Powder Coated Panel Based Partition Having Provision Of Fabric / Soft Pin Up Board / White Marker, Raceways On Two Level For Data & Electrical, Work-Top Made Of 25Mm Thick Pre-Lam Particle Board [Edge Banded], Gable Made Of 25Mm Thick Pre-Lam Particle Board [Edge Banded], Curvilinear Partition : Consisting 60Mm Thick Aluminium Extruded Powder Coated Panel Based Partition Having Provision Of Fabric / Soft Pin Up Board / White Marker, Raceways On Two Level For Data & Electrical, Gable Made Of 25Mm Thick Pre-Lam Particle Board [Edge Banded], Keyboard Tray ; Laminated, Cpu Trolley : Laminated Partition : - 900 W X 1200 H, Linear Work-Top - 900 W X 600 D,Make- Geeken / Godrej / Wipro/ Feather Lite , Low Back Chair , Seat Is Made Of 12Mm Hot Pressed Ply Wood With Pufoam Density 45Kg/M3 & Back Made Of Polyproplane With Pu Foam Density Is 35 Kg/M3 And Fabric Tapestry. The Revolving Chair Type Designed With Outarms Rest Andgas Lift Bifma 3 Standard Telescopic Gas Lift Cover , Nylonbase 30% Glass Filled Withtwin Wheel Castor And Push Back Mechanism. The Hr Plate Size 60Mm X 6Mm With Ribs Powder Coated And Joint With Back And Mechanism, Nylon Base Load Capasity- 1250Kg. Seat Size 18 (W) X 18 (D) , Back Height 15 From Seat And Overall Height -33.Make- Geeken/ Godrej / Wipro/ Feather Lite , Audio Podium With Inbuilt Amplifier, Speaker, Wireless Mic Set, Gooseneck Mic And Light, Make- Geeken/ Godrej / Wipro/ Feather Lite , 2 Seater Student Desk, Powder Coated Frame, Mdf Top Grade Ii Is 12406,Sides. Size: W 1270 X D 520 X H 900 Mm (First) Sides. Size: W 1270 X D 810 X H 900 Mm (Middle) Sides. Size: W 1270 X D 670 X H 900 Mm (Last) Seat, Back, Modesty,Providing And Supplying Two Seater Desk-Cum-Bench. The Work Top Shall Be Supplied Of 18Mm Thick Mdf Board With Approved Laminate And Shade. It Shall Be Supplied With 18Mm Thick Shelf Booktrey For Storage. The Front Of The Desk Shall Be Clad With 18Mm Thick Modesty Panel Made Up Of Mdf Which Provides Structural Support As Well As Keeping The Privacy Secure. The Sides Shall Be Clad With 36Mm Thick Mdf. The Seat Shall Be Made Up Of 18Mm Thick Plywood Padded With High Resilience Pu Foam. The Understructure Shall Consist Of Ms/Crca 80Mm X 40Mm Rectangle Pipe Frame Duly Powder Coat Finish. It Should Be Arrested Together With Ms Pipe Frame Having Cross-Section Area 80Mm X 40Mm Rectangle Pipe. The Understructure Shall Consist Of Ms/Crca 80Mm X 40Mm Rectangle Pipe Frame Duly Powder Coat Finish. Understructure Consists Of Two Leg Assemblies. The Seat Shall Have Tip-Up Mechanism In Which The Seat Shall Be Able To Pull Down For Sitting On And Return To An Upright Position. Make- Geeken / Godrej / Wipro/ Feather Lite , 3 Seater Student Desk, Powder Coated Frame, Mdf Top,Sides. Size: W 1875 X D 520 X H 900 Mm (First) Sides. Size: W 1875 X D 810 X H 900 Mm (Middle) Sides. Size: W 1875 X D 670 X H 900 Mm (Last) Seat, Back, Modesty,Providing And Supplying Two Seater Desk-Cum-Bench. The Work Top Shall Be Supplied Of 18Mm Thick Mdf Board With Approved Laminate And Shade. It Shall Be Supplied With 18Mm Thick Shelf Booktrey For Storage. The Front Of The Desk Shall Be Clad With 18Mm Thick Modesty Panel Made Up Of Mdf Which Provides Structural Support As Well As Keeping The Privacy Secure. The Sides Shall Be Clad With 36Mm Thick Mdf . The Seat Shall Be Made Up Of 18Mm Thick Plywood Padded With High Resilience Pu Foam. The Understructure Shall Consist Of Ms/Crca 80Mm X 40Mm Rectangle Pipe Frame Duly Powder Coat Finish. It Should Be Arrested Together With Ms Pipe Frame Having Cross-Section Area 80Mm X 40Mm Rectangle Pipe. The Understructure Shall Consist Of Ms/Crca 80Mm X 40Mm Rectangle Pipe Frame Duly Powder Coat Finish. Understructure Consists Of Two Leg Assemblies. The Seat Shall Have Tip-Up Mechanism In Which The Seat Shall Be Able To Pull Down For Sitting On And Return To An Upright Position.Make - Geeken / Godrej / Wipro/ Feather Lite , Podium, Size : 700 X 760 X 1300, Made Up Of Prelaminated Particle Board Having Dark Colour Will Be Replaced By Hi-Land Pine & Light Colour Will Be Replaced By Wenge Complete 18Mm Plpb Action Tesa Shade With Top 2Mm & Rest 0.8Mm Pvc Edge Bend With Cable Manager Along With Laptop Stand. Make- Geeken/ Godrej / Wipro/ Feather Lite , Supplying & Placing Executive Table In Completely Knock Down Conditions With An Overall Size 1200Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Be Made Up Of 25Mm Thick Mdf Board With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape With One Side Post Forming Edges. The Top Shall Be Supported Over Mdf Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 18Mm Thick Mdf Board And Profile Shall Be In Linear Shape. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Shall Be 18Mm Thick Mdf Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. One Hanging Drawer Shall Be Provided With An Overall Size 400Mm X 450Mm X 150Mm With Key Locking Mechanism. The Drawer Shall Be Made Up Of Mdf Board Of Grade Ii Of Is 12823. Drawer Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Drawer Shall Be Operated With Al Die Cast Handle And Easily Close & Open With The Assistance Of Ball Bearing Channel To Enable Smooth Operation. Make- Geeken/ Godrej / Wipro/ Feather Lite , Class Room Platform Of Size : 10W X 5 D X Raiser Height 10, Main Structure Made Up Of Ms Pipe Frame Of 2 Mm Thick With 19Mm Mdf Board Of Grade Sbg Ii Of Is 12406/Latest, Understructure Flat Single - Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf-23 Of Is 14587/Latest. Folding Mechanism Legs Madecrca Square/ Rectangular Sections Of 14 , 12, 16Swg And 3Mm, 6Mm Solid Flat, With 37Mm X37mm 3Mm/4Mm/5Mm Automatic Die Made Parts , Duly Epoxy Coated , With19mm Plywoodduly Painted With Anti-Termite Proof Chemicalsand Paints , Fittedwith Four Non-Marking, Heavyduty, Bearing Fitted Castors, Fitted With Carpetand All Around Protective Angles, With Velcro All Around The Stage. Make- Geeken/ Godrej / Wipro/ Feather Lite
