Tender For Civil Day To Dayand Periodical Maintenance Works To Bsnl Staff Quarters Type V Block At Taylors Road For The Period 2024-25., chennai-Tamil Nadu

Tender For Civil Day To Dayand Periodical Maintenance Works To Bsnl Staff Quarters Type V Block At Taylors Road For The Period 2024-25.; 1 Removing the bibcock / stop cock/pillar cock/Wheel valve(all sizes) and refixing after checking, cleaning and providing new washers or teflon tape roll (for valves) etc. as directed by the Engineer in Charge. 2 Providing and fixing gun metal gate valve with C.I wheel of approved quality (lever type) 3 20mm nominal bore 4 25mm nominal bore 5 40mm nominal bore 6 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 7 15 mm nominal bore. 8 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 9 15 mm nominal bore. 10 Providing and fixing C.P. brasswall mixer 2 - in -1of approved qualityetc complete and as directed by the Engineer in charge 11 15 mm nominal bore. 12 Providing and fixing C.P. brass ( parry ware or equivalent) sleek shower with shower arm - square/round100 mm approved quality 13 ProvidngC.P brasssteel coated PVC healthe faucet etc complete and as directed by the Engineer in charge 14 Providing and fixing C.P. hand showerof approved qualityetc complete and as directed by the Engineer in charge 15 Providing and fixing unplasticisedP.V.C connection pipe with PTMT nuts, collar and bush of approved quality and colour :- 16 15mm nominal bore with 45cm length :- 17 Providing and fixing P.V.C waste pipe for sink or wash basin or urinals including P.V.C waste fittings complete :- (Flexible pipe) 18 32 mm dia. 19 40 mm dia 20 Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour 21 Waste coupling 31mm dia of 79mm length and 62 mm breadth weighing not less than 45 gms 22 Waste coupling 38mm dia of 83mm length and 77mm breadth weighing not less than 60 gms 23 Dismantling the shaking wash basin / sink including removing the pillar cock, pipe connections etc and dismantling the clamps and providing and fixing new clamps including cutting and holes and making good the walls and re-fixing the same wash basin/ sink making pipe line connections etc. complete all as directed by the E in C. 24 W/B bracket 25 Sink bracket 26 Cleaning and removal of blockages in water lines by dismantling the fittings such as Unions, valves, bibcocks, stop cocks, pillar cocks etc.cleaning using spring rods in internal pipes etc. complete all as directed by the E in C. 27 Internalwork 28 Removing the existing damage PVC door Bend/Tee at existing waste water line and providing and fixing new PVC door bend/Tee of approved quality upto floor V level including cutting and making good the walls etc., complete as directed. 29 110mm dia 30 Providing and fixing fittings to old pipe lines/ for new lines provided in small length at a stretch up to1.5m) such as Tee, bend, elbow, coupling, reducer etc. 31 15mm to 40mm nominal bore 32 Providing and fixing PTMT towel rail completewith brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 100gms. 33 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead: 34 Disposal of building rubbish by mechanical transport including loading, unloading and stacking etc complete upto 20 km lead 35 Providing and fixing 600 x 450 mm mirror ofapproved quality with PVC beading alround neat complete. 36 Easening of wooden doors / window shutters of all sizes without removing the shutter, to size the sides / rebate and tightening the hinges etc. by carpenter tools to give a smooth operation. 37 Door shutters 38 Window shutters 39 Dismantling doors, windows, clerestory windows (steel or wood ) shutter including chowkhats, architrave, hold fasts etc. complete and stacking with in 50 metres lead: 40 Of area 3 Sq. Metres and below (wood) 41 Providing and fixing aluminium tower bolt ISI marked anodised ( anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 42 150 x 10mm 43 Providing and fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 44 100 mm 45 Easening of wooden door/window shutters of all sizes upto floor five level by removing the shutter,size the sides and rebate of frame and shutter by carpenter tools and refixing in position to give a smooth operation.(The rate includes necessary hinges) 46 Door shutters 47 Window shutters 48 Providing and fixingPVC of Supreme, Finolex or equivalent trap of self cleaning design with including cost of cutting and making good the walls and floors neat complete. 49 100mm inlet and 75mm outlet 50 Trimming branches of trees which are hiding the centre of the road view alround the campus and close to the buildings in all blocks including disposing the same tothe nearest municipal dump 51 Renewing glass panes, with wooden fillets wherever necessary: 52 Float glass panes of thickness 4 mm 53 Deduct for taking possession and disposal of following unserviceable materials in as is where is condition. 54 15 to 40mm dia GI pipes with GI fittings 55 bib cocks & stop cocks(Brass / c.p brasspipe fittings ) 56 Pillar cocks (Brass / c.p brasspipe fittings ) 57 Shower rose (Brass / c.p brasspipe fittings ) 58 CP brass waste coupling 32/40mm dia (Brass / c.p brasspipe fittings ) 59 Wheel valves (20mm to 25mm size) (Brass / c.p brasspipe fittings ) 60 Wheel valves ( 40mm to 50mm size) (Brass / c.p brasspipe fittings ) 61 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litres low level white flushing cistern with manually controlled device(handle lever) conforming to IS:7231 with all fittings and fixtrures complete including cutting and making good the walls and floors wherever required. 62 WC pan with ISI marked white solid plastic seat and lid 63 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :- 64 Flat back wash basin of size 550 x 400mm 65 Providing and fixing white vitreous china water closet squatting pan (Indian Type) :- a) Orissa pattern WC pan of size 580 x 440 mm. 66 Providing and fixing white vitreous china WC trap including jointing to orissa pattern WC pan etc. complete all as directed by the E in C. 67 Dismantling G.I pipe with fittings and clamps including plugging the connection and making good the wall etc.neat complete. 68 a)15mm to 50 mm dia pipe 69 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 70 20 mm nominal outer dia .Pipes. 71 25 mm nominal outer dia .Pipes. 72 Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 73 63mmOuter dia 74 90mm Outer dia 75 110 mm outer dia 76 Providing, fixing and jointing with solvent cement PVC (Pressure class 4Kg/Sqm) soil waste and vent pipe accessories of approved make and quality Fittings with / without door (Plain bend, tee, y junction terminal guard etc.) 77 63mm Outer dia 78 90mm Outer dia 79 110 mm outer dia 80 Dismantling the existing door ,cutting to required height and making good the door to shut and open freely with necessary hinges neat complete as directed by the Eng-in-charge. 81 Deduct for taking possession and disposal of following unserviceable materials in as is where is condition. 82 15 to 25 mm dia GI pipes with GI fittings

INR 590 /-

INR 5940.0 /-

Refer document