|
| 1 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 2 | Material and labour for point wiring with 1.5Sqmmcopper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable in and includingPVC casingand capingof suitable size(as per conductor run) with all fittings such as bend/corners/ accessories and including PVCinsulated electric cable1100 volts 1.5 Sqmm (multi-stranded)copperconductor single core( Green colour)cable as continuous earth wire connected to common earth dollyin existing CI/wooden box covered with 3 mmthick plastic laminated sheetfor one light point/ fan/exhaust fan point/ bell point etccontrolled by one, one way switchcomplete all as specified and as directed by the Engineer-in-Charge.Note : i) New Sunken boxes wherever required shall be measured paid separately. ii) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB\"s in DB\"s without any extra cost |
| 3 | All as per serial item No 2 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded)PVC insulated and unsheating electric cable 1100 volts(ISI Marked) including PVC insulated and unsheathedelectric cable 1100 volts 2.5 Sqmm copper stranded conductor ascontinuous earthwire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for switch socket combination 2 in 1, 5 Amp and 15 Amp flush type all as specified and directed. |
| 5 | M&L for switch piano flush type single pole one way 5/6 Amp |
| 6 | Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals/ PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge. |
| 7 | Taking down exhaust fans 250/ 300/ 380/ 450 mm sweep, and then properly cleaning and greasing of bearings after opening of the fan including replacement of unserviceable parts, reassembling and reconnecting of exhaust fan all as directed.Note: - Spare parts will be measured and paid separately at \"supply only rates\". |
| 8 | Supply only ball bearing of exhaust fans of any size and type all as per site requirement including greasing, all as specified. Make: SKF/NBC/ABC |
| 9 | Material and labour for rewinding of exhaust fan of 225 to 300 mm sweepcompletewith super enameled insulated copper wire ofappropriate size , including all winding,insulating material and impregnation of insulating varnish as per detail given below of any make, type, model including transportation from AGE E/M store yard to site of rewinding complete, all as directed. |
| 10 | All as per item No. 09 above but exhaust fan of 450 mm sweep. |
| 11 | Painting of exhaust fans after due preparation of surface 225/300/380/ 450 mm sweep completeat site with super enamel syntheticpaint of colour as per old oneby spray gun including filling cavities with filler, two coats after cleaning all dust, grease, smoke spots etc all as directed. |
| 12 | Taking down carefully from wall after unscrewing nut/bolts geyser 50/35/25 Ltr capacity and opening the same for taking out internal tank, syphon assembley etc and reassembling and refixing after repair all as specified and as directed by Engr-in-Charge. Note: Spares shall me measured and paid sepratley under respective items of Sch. |
| 13 | Supply only heating unit(element) ISI marked of 1500 watts triangular shape rating as required at site including rubber washers complete, all as specified and as directed. (As per sample)Make : Umpire/Wondercool/Ditz/ Toshiba/jRacold |
| 14 | All as per Serial item No 15 above but circular shape, all as specified and as directed.(As per sample)Make : Umpire/Wondercool/Ditz/ Toshiba/Racold |
| 15 | Supply and replacement internal steel tank of geyser 25 ltr capacity complete with syphon –assembly, 1.5 kw element , rubber gasket , thermostat switch , all as specified and directed .The tank shall be tested at site and shall be able to with standthe requisitepressure. Necessary testing equipment shall be arranged by the contractor . |
| 16 | Supply and replacement internal steel tank of geyser 50/35 ltr capacity complete with syphon –assembly, 1.5 kw element , rubber gasket , thermostat switch , all as specified and directed ., The tank shall be tested at site and shall be able to with stand requisite pressure . Necessary testing equipment shall be arranged by the contractor . |
| 17 | Supply and replace PVC connection 15mm dia complete with brass flair nuts at both ends. ( ISI marked and suitable for hot water supply upto 100 degree celcius .) |
| 18 | Supply and fixing anchor bolt 12mmX100mm long complete all as spd and directed (Note:- Anchor bolt shall be grouted with hammer drill only) |
| 19 | Supply only ISI marked thermostat range 0°-75°C for the geysers of 25 to 50 Liters capacities complete, all as specified and as directed.(As per sample) |
| 20 | Supply for 15mm stop valve CP fancy type,cast copper alloy,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe unions and suitable complete all as specified. |
| 21 | Supply only non return valve 15mm dia cast copper alloy ISI mark complete all as specified and as directed by Engineer-in-charge |
| 22 | Cleaning / scrapping of old paint/dust and painting of geysers of 25/35/50 litres capacityat site/ storeswith two coat of super enameled painting by spray complete, all as specified and as directed. |
| 23 | Supply and fixing mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lenghts, with and including all fittings such as sockets,bends,elbow,unions,tees diminishing pieces etc, fixed to wall or ceiling or in floor complete all as specified and directed. |
| 24 | Supply and fixing sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 8 way, double door, 240 volts with 200 Amp rated bus bar, including taking down the existing and making good distrubed surface, all as specified. |
| 25 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) ofcurrent carrying capacity SP5 to 32 Amp MCB complete with connection testing and commissioning. |
| 26 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) ofcurrent carrying capacity SPN 32 Amp MCB complete with connection testing and commissioning. |
| 27 | Supply and fixing (in replacement) Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and as directed. |
| 28 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductorof size 10sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apartincluding 4mm suspension wire, one twin core cable flat or circular. Make : Polycab or equivalent. |
| 29 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 30 | Supply and fixing LED bldg security light 15 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make : Havells Cat Part No : VILUMINASL 15WLED757SASYBOPC or equivalent. |
| 31 | Supply and fixing (in replacement) PVC body Exhaust fan 200/250 mm sweep, 5 star rating, 230 V AC, copper binding, blades, frame and, louvers withsuitable size of copper wire for connection ceilng rose to Exhaust fan including making good surface and as directed. |
