Tender For Provision Of Health/ Hygiene Related Works Services At Af Stn Sonegaon, Nagpur.; 1 Excavation over areas in hard/ dense soil n. exc. 1.50m deep and getting out complete all as specified and directed. 2 Excavation over areas in soft/ loose soil n. exc. 1.50m deep and getting out complete all as specified and directed. 3 Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed. 4 Removing excavated soilexceeding 1.0Km and not exceeding 1.5Km and depositing where directed complete all as specified and directed. 5 Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thickcomplete all as specified and directed. 6 M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed. 7 M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:4 all as specified and as directed. 8 M&L for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in precast cover slab with plain faces for manholes set in cement mortar (1:6) including necessary form work completeall as specified and directed. 9 M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed. 10 M&L for providing Cement Concrete Type (1:2:4) type B-1 using 20mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed. 11 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 12 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed. 13 Demolition of PCC in ground floor and paving n. exc. 15cm thick below orabove ground level including removal of debris outside MD land complete all as specified and directed. 14 Demolition of brickwork or masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. 15 M&L for 100mm thick PCC 1:3:6, type C2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed. 16 M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. 17 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified and directed. 18 M&LGlazed Ceramiccolour tiles 350X450X 7 to 8 mm thickon vertical surfaces such as skirting/dados including back coat of plaster in CM 1:3 10mm thick complete all as specified and as directed. 19 M & L Machine cut cudappah stone slab 20-25mm thick over 20mm thick cement screed bed 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified. 20 M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a backing coat of 15mm thick in CM 1:3 complete all as specified. 21 M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 22 M&L for Machine cut kota stone slab flooring 20-25mm thick on vertical surfaces such as skirting/dados including back coat of plaster in CM 1:3 10mm thick complete all as specified and as directed. 23 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. 24 M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces externally with water proofing compound finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately. 25 M&L rendering 15mm thick in cement mortar (1:6)on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed. 26 M&L preparation of newly plastered surface of walls and applying two coats of whitewash complete all as specified and directed. 27 Supply only liquid water proofing compound 28 S & Fangle stop valves cast copper alloy fancy type, chromium plated of size 15 mm bore all as specified and directed. 29 Supply and layingof 15mm bore GItubing medium gradewith all fittings including cutting for branch line & makingthreadscomplete fixedto wall/flooring /ceiling etc or laid in trenches all as specified. 30 S&F Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterflyhandle confirming to IS screwed down, screwedfor iron pipes or for brass ferrule, completeall as specified and as directed. 31 S&F 110mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls including PVC clamps etc. complete all as specified and directed. 32 S&F UPVC (SWR) bend any radiussuitable for 110mm dia pipes complete all as specified and directed. 33 S&F UPVC (SWR) junction single (single T) equal or unequalsuitable for 110mm dia pipes provided with access doorcomplete all as specified and directed. 34 S&F 75mm dia oulet PVC (SWR) floor trap, plain with steel grating including jointing with solvent cement complete all as specified and as directed. 35 S&F 125mm dia oulet PVC (SWR) gully trap jointing with solvent cement complete all as specified and as directed. 36 S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, havingbowl size 750mm x 450mm x 450mm including 38/40 mm dia waste pipe complete all as specified and as directed. 37 M&L 200 mm dia (internal) SGSW pipes grade ‘A’ laid in trenches jointed in CM 1:2 and tested after the pipes are laid jointed complete all as specified and directed 38 M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm dia RCC pipe including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. 39 S & F concrete perforated drain cover of load carrying capacity of 5 ton having minimum thickness of 70mm of dimension 0.45m x 0.75m as required complete all as specified and as directed. 40 S & F covered stainless steel grease seperator made of SS 304-2mm minimum thickness for corrosion free compact structure having four separate compartment with integrated sludge trap - Trap of dimension length 1.3 m x width 1.06m x Height 0.80m as required complete all as specified and as directed. Make : Nugreen, New DelhiCat Part No: NGT (L1300x W1060x H800)mm or its equivalent in other makes. 41 S & F stainless steel triple sink/ compartment with polished surface with working table space made of fully with stainless steel body having bottom shelf with minimum width of 750mm and height of 860mm and total length 3.3m in L shape fitted with sink dimension of 600 mm x 750mm x 450mm fitted with bottom valve system for accessing to hold/ clear water in the sink and necessary PVC outlet connectionas required complete all as specified and as directed.
