Providing And Installation Of Lan, Sound System And Other Ancillary Work At New Collectorate Building, Ajmer Lan- 1 Lan and CCTV WORK 2 Providing & Fixing of ISO certified company made virgin material PVC trunking system as per PWD specification for electrical Works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required .The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. OEM shall have submit NABL accrediated /CPET lab test reports before execution & All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure Aattached with this BSR .32mm X 20mm 3 Providing & Fixing of ISO certified company made virgin material PVC trunking system as per PWD specification for electrical Works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required .The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. OEM shall have submit NABL accrediated /CPET lab test reports before execution & All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure Aattached with this BSR . 80mm x 50mm 4 Providing & Fixing of following modular accessories as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in-charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSRRJ-11 telephone jack single line 5 P & F Krone module with base frame in the recess / surface made out of 1.2 mm thick sheet steel box, front openable, having locking arrangements duly powder painted,including dressing, ferruling and punching of telephone cable with krone tool etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR10 Pairs 6 P & F Krone module with base frame in the recess / surface made out of 1.2 mm thick sheet steel box, front openable, having locking arrangements duly powder painted,including dressing, ferruling and punching of telephone cable with krone tool etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR20 Pairs 7 P & F Krone module with base frame in the recess / surface made out of 1.2 mm thick sheet steel box, front openable, having locking arrangements duly powder painted,including dressing, ferruling and punching of telephone cable with krone tool etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR50 Pairs 8 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002 in existing surface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR1 pair 9 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002 in existing surface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR10 pair 10 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002 in existing surface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR20 pair 11 Supply, Installation, & Testing of 19 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, multimode glass Fiber Optic Cable Patch panel/LIU loaded with flangless/screwable adapters for ST/E-2000/ SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirement complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . Multi Mode LIU 24 Ports 12 Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with UMarking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. Accessories like: 1 No of 19 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19 1U, mountable socket strips with 5 nos of 5A universal sockets with 2mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .9 U Rack with Width 600 mm & Depth 400 mm + 100 mm 13 16 port Unmanaged Network PoE Switch: 16 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports 14 Supply, Installation, Testing & Commissioning of 5 MP IR Fixed Dome Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, IK10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep learning CE, FCC, BIS certified 15 Supply, Installation, Testing & Commissioning of 5 MP IR Fixed Bullet Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage including SD Card up to256 GB , IP67, Alarm 1 inputs, 1 outputs, Audio 1 inputs, 1 outputs, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep learning CE, FCC, BIS certified 16 SITC of 55 4k Resolution or Better LED TV with remote control andwall mount unit / floor stand complete with making connections etc.as required. each 17 Resolution 4Kscreen display size 85 Inches 85 inch Special Features QLED TV| Google TV| Dolby Vision -Atmos | HDR 10+ |AiPQ Pro Processor| T-SCREEN- PRO|Slim and Uni-Body Design |MEMC|2 GB RAM+32 GB ROM| DLG 120 Hz | Multiple Eye Care | ONKYO 2.1 CH | T-Screen Pro| Multiple Eye Care | DTS Virtual:X |Hands Free Voice ControlScreen Resolution 3840 x 2160 pixelResolution 3840x2160 PixelsAudio output mode SurroundSupported audio formats mp3_audio, wmaSpeaker Surround Sound Channel Configuration Dolby AtmosSpeakers Maximum Output Power 50 WattsAudio Wattage 50 WattsVoltage 240 VoltsWattage 410 Watts 18 Supply, Drawing and Testing, of stranded Multi mode (50/125 µm) glass optic fiber cable, as per latest ammendments of TIA/EIA 568/ISO/IEC 11801:2011/ IEC 60794-1-2 E1, E3,E11, F1/ EN 50173-1/ EN 187 000/ IEC 60974-2, 2-20, 2-21/ ITU G.652D, construction of LSZH outer sheath cable, cable should be used for LAN and WAN back bones, . With its LSZH sheathing these cablesshould be ideal for indoor/outdoor installations in existing MS/PVC/HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR.6 fiber 19 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with HDPE, U/UTP (Unscreened/Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Outdoor Cable as per latest ammendments of ANSI/TIA/EIA-568 C.2 & ISO/IEC 11801 2nd Ed, The copper conductors should be balanced twisted in pairs, seperated by a cross divider & protected by LSZH PVC outer jacket of UV resistant. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. Should meet IEEE 802.3af & IEEE 802.3at for POEapplications. Cable Should support Ethernet 10GBASE-T according to the standards. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer AnnexureA attached with this BSR . 20 PABX System-EPABX COMPLETE AS PER DETAILED SPECIFICATION with extensions 48 analog trunk ( FXO) 4 MDF (Number of Pair) 200 with receiver (digital + analog) EPABX system Implementation Technology/ArchitectureConventional ( Card/microcontroller based )Number of Analogue Extensions /FXS ports 48Expandable upto(TDM ports/FSX ports) 2048Number of Digital Extensions 16Number of Analogue Junction/FXO ports 4Number of SIP Extensions 4SIP Extensions Expandable upto 1296Number of SIP Trunks (CHANNELS) 4Number of PRI TRUNKS 6 21 video wall panel for presentation or meeting in 4k , latest technology available withrequired size of wall or as direction of engineer intcharge.Vendor has to take prior approval from the engineer intcharge in written before the purchase of this item. 22 Multimedia ProjectorTechnology-LCDNative Resolution- 1920 x 1200(WUXGA)Brightness (Lumens)-6200Optical Zoom-YesIf Yes, Optical Zoom (%)-160If Yes, Type of ProjectorStandardThrow (0.91 to2.5)Type of Light Source-LaserWi Fi Connectivity-YesWireless Screen Share-YesLAN Connectivity-YesTechnical Specifi cationsTechnology-LCDProjection MethodFront and Rear bothOptical Zoom-YesAvailability of Lens-YesAspect Ratio-16:10Minimum Life of LightSource (In NormalMode) (Hours)-20000Lamp Hour Counter (In-Built)-YesInbuilt Speaker-YesIf Yes, Wattage ofSpeaker-10Power Supply210V-240V, 50 Hz, With portable stand. 23 Motorized Projector Screen | Electric Projection Screen WIDESCREEN ASPECT RATIO: The projector screen features a wide viewing angle and has the same aspect ratio as an HD TV. It is suitable for most movie formats, ideal for home theatre cinema or video/film showing.Screen Material: Featuring a 160° viewing angle and 1.2 gain, 3-layer premium black backed screen matte White fabric with textured surface. 4K Ultra HD and Active 3D Projection Ready. Easy to clean.Efficient Motor: The energy-efficient synchronous motor operates smoothly and silently with a long operational life. Includes Radio Frequency (RF) remotes and a 3-way wall switch.Size:- 96 intch. with portable stand. 24 SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel. The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) Interconnection between bus bar and switchgears /cable shallbe rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only. All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar / Flexible wire for Interconnection between Main busbar and Switchgear is to be Paid Extra)(d)Wiring between components within switchgear and Incoming/outgoing cable shall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. (e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)Floor mounted panel shall be mounted on Base frame of ISMC channel size 100 x 50 x 5 mm ( to be paid Extra )(g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out.(h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer incharge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . Sq. Mtr 25 Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity , high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .57.2.1 Electrolytic grade Aluminium bus bar 6010 grade Kg. 26 Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type (up to 500) V range Volt meter / Direct- Ammeter / CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracy as per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .57.3.1 Single Phase Ammeter Each 1,201.00 27 Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type (up to 500) V range Volt meter / Direct- Ammeter / CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracy as per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .57.3.2 Single Phase Voltmeter Each 1,201.00 28 SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% ICU. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure A attached with this BSR 4 pole MCCB With Thermal Magnetic release250 Amp , 25 kA, adjustable O/L & adjustable S/C setting, Each 29 SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% ICU. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure A attached with this BSR4 pole MCCB With Thermal Magnetic release 400 Amp , 35 kA, adjustable O/L & adjustable S/C setting, Each 30 Controller system for audio conferencing system.Able to connect and operate the deligated unit speakers for conference meeting . 31 Deligated audio unit for Conferencing system+C52:C54Frequency Response 400 Hz to 10 kHzMounting TabletopNominal Acoustic Input at the Microphone 85 dB SPLFeatures:Compact, Built-in volume control for headphonesMicrophone with flexible stem and light ringTwo headphone sockets 32 Power amplifier 2x500W/ 1000 WPower amplifierhas the following features:• Floating 100 V or 70 V power outputs• High efficient amplifier blocks in class-D technology• Outputs idling and short circuit-protected• Mains operation 120-240 V (50/60 Hz) and/or 24 V DC emergency backup• Electronically balanced inputs• Temperature monitoring function• Processor control of all functions• Monitoring of the processor system via watchdog circuit• Non-volatile FLASH memory for configuration data• Internal monitoring function• Integrated audio relays• Line monitoring function• Pilot tone and ground fault monitoring function via 33 Power amplifier 100WPower amplifierhas the following features:• Floating 100 V or 70 V power outputs• High efficient amplifier blocks in class-D technology• Outputs idling and short circuit-protected• Mains operation 120-240 V (50/60 Hz) and/or 24 V DC emergency backup• Electronically balanced inputs• Temperature monitoring function• Processor control of all functions• Monitoring of the processor system via watchdog circuit• Non-volatile FLASH memory for configuration data• Internal monitoring function• Integrated audio relays• Line monitoring function• Pilot tone and ground fault monitoring function via 34 Wall Speaker(40Watts) / AdjustableSpeaker Maximum Output Power: 40 WattsFrequency Response :50000 HzConnectivity Technology :CoaxialAudio Output Mode :Mono 35 Cordless Mic Audio Array AM-W14 UHF Dual Wireless PremiumMicrophone | 2X XLR Outs & 1/4 Mix Out | Range up to 200ft/60m. Connected PA System, Amplifier, Mixer, Party Boxeach set2 Cordless Mic with complite accessories. 36 Dolby Audio : Enjoy dramatic, high-quality surround sound from 5.1 separate audio channels with Dolby Digital5.1ch Surround Sound : 5.1 channels of real surround sound. Rear speakers and an external subwoofer work with a 3-ch soundbar to deliver dynamic, immersive, cinematic sound.Power Output : 400W power output puts you right at the heart of action , speaker type --1 Subwoofer; 1 Soundbar; 2 Surround SoundBluetooth Connectivity : Easily play your favourite content via bluetooth connectivityUSB Playback :Use the USB port to plug and play music from a memory stick with easeSound Mode :A button for every sound—choose the mode thats right for whatever youre watching or listening to, including Auto, Standard, Cinema and Music. You can also select Night and Voice modesHDMI Arc and Optical Connectivity : Connect your soundbar with TV via single cable connection 37 Supply, Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler with hermetically sealed compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz AC supply,Full stainless steel (SS304) body (0.8 mm thick) and tank (0.5 mm thick) , stainless steel water tray, minimum two nos Brass Chrome plated faucets and suitable drainage system complete in all respect with required height MS fabricated and Painted Angle iron frame (Cost of frame to be paid Extra) complete in all respect of the following capacity. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .cooling capacity 150 Ltr./Hr. and storage capacity 150 Ltrs 38 Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using :12 mm thick one side laminated board Practical board (Phenolbonded) 39 Providing and fixing 50 mm thick resin bounded glass wool 32 kg/cum density wrapped in julities cloth bag (box type) and held in position using chicken mesh
