Tender For Special Repair To Age Em Yard Under Ge Narangi; 1 Demolition of plain cement concrete (Un-reinforced) in ground floors and paving next 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed. 2 Demolition of cement concrete (reinforced) of any description or in any position not otherwise specially provided for complete all as specified and as directed. 3 Material and labour cement concrete 1:4:8 type type D-2 using 40mm graded stone aggregate as in foundation, filling, sub base complete all as specified and directed. 4 Material and labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete all as specified and directed. 5 Material and labour for precast RCC, 1:2:4, type B1 (using 20 mm gradedstone aggregate) as in cover slab for manholes, drain etc with plain fair faces including chamfers, weathering and setting in cement mortar (1:4) including form work complete all as specified and as directed. Note : Reinforcement will be measured and paid seperately. 6 Material and labour for 75 mm thick, PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade A etc complete all as specified and as direted. 7 Form work for rough finished surfaces to sides and soffits of floor or roof beams, beam haunchings girder, lintels, cantilevers, shelves including supports overhangs etc complete all as specified and directed. 8 Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and directed. 9 Dismantling of stone slabs and tiles of any description or thickness in floors/aprons laid bedded and pointed in any mortar complete all as specified and directed. 10 Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and as directed. 11 Material and labour for glazed ceramic coloured tiles 450mmx300 mm x 6 to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendring in CM (1:4) complete all as specified and as directed. 12 Material and labour for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqmin floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 13 All as per Item 12above but skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendring in CM (1:4) complete all as specified and directed. 14 Material and labour for 20 to 25 mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match including rubbing and mirror polishing complete all as specified and as directed. 15 Material and labour for kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over rendering 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishingcomplete all as specified and as directed. 16 Material and labour for pre-polished rubber molded smooth- finish, exterior, designed, pre-cast interlocking tiles/pvers,80 mm thickness M-40 Gradeincluding 25mm thick sand cushioning complete all as specified and as directed. 17 Material and labourforChequered cement concrete tiles 30cm x30cm x 25mm thick,with grey cement and pigment set, ointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 18 Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including granding and polishing complete all as specified and directed. 19 Demolition of brick or stone masonry work built in cement mortarincluding all quoins, arches, pillars etc complete all as specified and as directed. 20 Material and labour for brick work with Sub class B Bricks , old size straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. 21 Material and labour for brick work but except bricks using class B old sized bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed.(Note: Old serviceable bricks as obtained from item against demolition) 22 Taking down existing cementplaster including racking out joints, hacking for key, scrubbing down with water etccomplete all asspecified and as directed. 23 Material and labour for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thickmixed with water proofing compound (@ 3% by weight of cement or as per manufactures instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note :Water proofing compoundto be measured and paid separately as Supply only. 24 Material and labour rendering 15 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete all asspecified and as directed. 25 Supply onlyintegral water proofing compound. 26 Taking up or down steel water tubing 15 mm bore from wall/ceiling or floors including all fittings complete all as specified and as directed. 27 Taking up or down steel water tubing 20 mm bore from wall/ceiling or floors including all fittings complete all as specified and as directed. 28 Supply and fix GI tubing 15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. 29 Supply and fix GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. 30 Re-fixing old 15 mm dia boresteel water tubing& connection in new or old positionfixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required complete all as specified and as directed. 31 Refixing old 20 mm dia boresteel water tubing& connection in new or old positionfixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required complete all as specified and as directed. 32 Dismantling of PVC water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and as directed. 33 Supply and fix in repairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed. 34 Supply and fix in repair 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for ironpipe and fixedcomplete all as specified and as directed. 35 Supply and fix in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210gms), complete all as specified and as directed. 36 Supply and fixin repair 600mmx 450mm bevelled edge looking mirror of selected quality ofoval shapeglass, mounted on 6mm thick AC building board or commercial ply woodwith PVC frameincluding all necessary fixing arrangement & fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. 37 Supply and fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with chromium plated bracket guard and railing 60 cm complete all as specified and as directed. 38 Supply and fix in repair soap dish, stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. 39 Supply and fix in repair 75 mmPVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed. 40 Supply and fixin repairs, brass chromium plated tubular towel rail, 20 mm dia, 60 cm long including brackets complete all as specified and as directed. 41 Supply and fix in repairfor 15 mm boreangle valvecastscrewed down, high pressure, with crutch or butter fly handle,for iron pipe or for unionscomplete all as specified and directed. 42 Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and directed. 43 Supply and fix in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm borecomplete all as specified and directed. 44 Supply and fix in repair grating round 150 mm dia of PTMT (minimum weight 100 gms) fixed omplete all as specified and directed. 45 Supply and fix in repairs 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 46 Supply and fix in repair 125 mm dia chromium plated swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and directed. 47 Supply and fix in repair 110mm PVC (SWR) bend any radius complete all as specified and directed. 48 Supply and fix in repair 10 Litres capacity, PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed 49 Supply and fixingPVC connection 600mm long and15 mm dia with brass fly nut at both ends ccomplete all as specified and as directed 50 Supply and fix in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm bore of pipe etc complete all as specified and as directed 51 Supply and fix in repair vitreous China wash hand basin white flat back of size 550 mmx400mm fixed oncantilever brackets of mild steel a 32mm dia brass waste coupling completed all as specified and directed. 52 Taking down chowkats with shutters including builders hardware(without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete all as specified and as directed. 53 Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each including shutter with builders hardware (without taking off shutters from the frame) complete all as specified and as directed. 54 Supply and fixPVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. 55 Supply and fix factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification&drawing and complete all as specified and as directed. 56 Supply and fixfactory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and as directed. 57 Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed. 58 Supply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed. 59 Supply and fix 150mm size extruded aluminium handles fabricated type, anodised and polished etc. complete all as specified and directed. 60 Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. 61 Supply and fix 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area exc.n 0.5 Sqm in each pane complete. 62 Materials and labour for preparation of newly plastered surface of wall and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed. 63 Material and labour for complete removal of exisring treatment of wallsand applying one coat ofprimersanding the surfaces till smooth finish is obtained and finally applying two coats of acrylicdistemper complete all as specified and as directed. 64 Material and labour preparation of newly plastered surfaces of wall and applying one coat primersanding the surfaces till smooth finish is obtained and finally applying two coats of cement based paint complete all as specified and as directed. 65 Material and labour for complete removal of exisring treatment of wallsand applying one coat ofprimersanding the surfaces till smooth finish is obtained and finally applying two coats of cement based paint complete all as specified and as directed. 66 Material and labour for preparing old decorated plastered surfaces of walls including cornices,pilasteredetc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt andtrading oil and greasy spots and applying two coat of exterior weather proof paint complete all as specified and directed. 67 Material and labour applying one coats of synthetic enamel paint on old wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed. 68 Material and labour applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide including preparation of steel surfaces complete all as specified and directed. 69 Material and labour applying one coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girthincluding preparation of steel surfaces complete all as specified and directed. 70 Material and labour for MS work as in door or gate etc with angle or other section drilled or welded including all fixing and locking arrangement and hold fast complete all as specified and directed. 71 Supply and fix mild steel plain black 1mm thick sheet in wall cladding , steel gates, similar workcut to size, holes punched including round headed screws, clout nails or riveted fixed to steel framing with plain 40mm lap joint with riveted or welded seam including bending or turning up complete all as specified and directed. 72 Supply and fix mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. 73 Material and labour mild steel flat iron as inhold fastfixed to chowkats confirming to Fe-290 Gde E-165 complete all as specified & as directed. 74 Supply and fixMild steel TMT bars of size 6 to 8mm dia, cut to length, bent to shape asrequired including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed. 75 Supply and fix in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensilestrength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specifed. 76 Supply and fix in repair pre-painted galvalume aluminium zinc coating GI based plainsteel sheet 0.50 mm thick of an colour having tensilestrength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specifed. 77 Providing and fixing in repair E-boardDesign Lake and Hill of size 605 x 605 x 4mm thick white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32x x300mm and soaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 2mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200 x 1600 mm modules cross tee longer than 600mm to be supported independently. 600 x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19 x 19 mm and 300mm long of white colour all as per manufacturers instructions all as specified and directed.( Make of Frame work Armstong or equivalent ) 78 Taking down carefully aluminium / copper point wiring for light / fan / socket / bell or power point including taking down concealed conduit if any, all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. completeand making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. 79 Taking down ceiling/wall fan including connection wires carefully and deposit to MES store in safe custody complete all as specified and as directed. 80 Material and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed. 81 All as per item serial No 80 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches 82 All as per item serial No 80 here-in-before but One socket outlet 3 pin 6 Amp on independent board. 83 All as per item serial No 80 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. 84 Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and directed. 85 Supply and fixsocket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed. 86 Supply and fixswitch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed. 87 Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and directed. 88 Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed 89 Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as specified and directed. 90 Supply and fixlamp holder ,PVC/Polycarbonate type with back plate suitablefor batten fittings.complete all as specified and directed. 91 Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 92 Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management inmultiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed 93 Supply and fix in repairs, factory made, sheet steel distribution boards, TPN, 4 Way,protection class IP-43with min 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and as directed 94 Supply and fix in repair/replacementMCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and as directed 95 Supply & fix in repair/replacementMCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus barand grouted in wall protection class IP-43 with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and as directed. 96 Supply and fix in repair/replacementMCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) 97 Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA,C-series marked fixing in DBs (DBs catered separately in this Schedule) 98 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 99 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and directed. 100 Supply and fixing in repair building secruity light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete 101 Material and labour forbuilding secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. 102 Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down complete all as specified and directed. 103 Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed. 104 Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed. 105 Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punnedthickness shall be measured and paid) 106 Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified 107 Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed. 108 Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. 109 Material and labour for sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.
