}

Selection Of Working Agency For Deposit Work Under Ee,Edd, Haidergarh, Barabanki., haidergarh-Uttar Pradesh

Boards / Undertakings / PSU has published Selection Of Working Agency For Deposit Work Under Ee,Edd, Haidergarh, Barabanki.. Submission Date for this Tender is 08-11-2024. Wall Construction Tenders in haidergarh Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

46027922
Selection Of Working Agency For Deposit Work Under Ee,Edd, Haidergarh, Barabanki.
Open Tender
Indian
Uttar Pradesh
Haidergarh
08-11-2024

Tender Documents

Tender Details

Selection of working agency for deposit work under EE,EDD, Haidergarh, Barabanki.- 1 Safe Carriage of following Materialfrom Elec. Store Center Barabanki to work site along with loading, unloading and propoer stocking. 2 STP Pole 11 Mtr. Long 3 11 KV XPLE Cable 3x120 sq.mm. 4 11 KV XPLE Cable Jointing Kit Indoor/Outdoor 3x120 sq.mm. 5 ACSR Weasel Conductor 6 Transformer 400KVA 7 Sub Station Base Angle 8 11 KV VCB for OG (CTR 200/100/5A) 9 Do Fuse Set 10 11 KV Top Channel 11 Earthing Rod 12 Dropper Channel 13 11 KV Pilfer proof Metering Cubical 25/5A 14 11 KV CT/PT Metering Pole Mounted Unit 25/5A 15 Dragging of Pole from dump site to work site 16 Erection of D/P following type HT Lines including all associated work with joint/jumpers and binding of insulator with complete all work as required. 17 Laying of 11 KV 3-phase line stringing and sagging of ACSR Weasel conductor including all associated works and making clearance of road with joints/jumpers and binding of insulator as required. 18 Earthing of pole as per RESPO Norms. 19 Installation of 11 KV VCB O/G, CTR 200/100/5Aat Site. 20 Installation of Metering Cubical With CT/PT unit and Proper connection as per requiredat Site. 21 Testing of 11 KV VCB O/G, CTR 200/100/5Aat Site. 22 Fixing of cable Jointing kit of 3x120 sq mm 23 Mounting of 400 KVA Transformer. 24 Providing and Fixing all types of following materials. 25 Grouting of ST Pole as per RESPO Norms with grouting materials. 26 All Type Clamps including fabrication & fitting of accessories. 27 GI Pipe 6 dia 28 Nut & Bolt 29 Construction of T/F Plinth of size 2x2x1.5 m on a padding 0.25 M deeo in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick, brick work in ration 1:4 cement & cores sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall, cement, sand & brick ballasts should be filled up to 15 centimeter. Two nos. of channel 100x50 in length 1500 mm will be grouded, 0.35 CM. RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The T/Fs plinth should be plastered on all sides 12 mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor). 30 Construction of retaining wall, fabrication & erection of Wiremesh fencing around Transformer with retaining wall & 01 nos. gate with locking arrangement made of MS Angle Iron of size 50x50x6 mm jointed with nuts and bolts. Wiremesh of size 10 swg rectangle type, its painting as per norms of RESPO. (All the materials will be arrangement by the contractor) 31 Earthing of Neutral of Transformer, Transformer body and double pole by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral, Body & D.P. connection being done by G.I. Strip.(All the materials will be arrangement by the contractor) 32 Earthing of Neutral of 11 KV VCB O/G, CTR 200/100/5A, and 11 KV Pilfer proof Metering Cubical 25/5A Transformer body and double pole by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which All neutral, Body & D.P. connection being done by G.I. Strip.(All the materials will be arrangement by the contractor) 33 Laying of 11 KV XLPE Cable 3x120 sq mm Double Ckt. in U/G with trench

Key Value

Document Fees
INR 1180 /-
EMD
INR 6500.0 /-
Tender Value
INR 6.43 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Notice 0 KB
Click here to download tender document Tender Document 0 KB
Click here to download tender document Tender Document 0 KB
Click here to download tender document Tender Document 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail