Re Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model Soft-Ro Edi Purified Water Generation, Storage And Distribution System , Water Treatment& Generation, Storage And Distribution System Including : Soft Water +Ro Water +Purified Water Generation System (Pretreatment +Ro+ Edi) - Capacity : 2000 Liter@Hr , This System Should Be Include : 1) Pre-Treatment System Including :(A) Chlorine Dosing ,(B)Multi (Mgf) Grade Filtration( C)Iron Removal Filtration:( D) Dual Softening System E) Hydro-Pneumatic System 2) Post Treatment System Including :(A)Micron Catridge Filtration (B)Ro Feed Pump & High Pressre Pumps, (C ) De Cholorination,(D ) Antiscalent Dosing,( E) Ph Correction Dosing ,( F)Plate Type Heat Exchanger,( G)Hydro-Pneumatic System 3) Ro -Edi System Including :(A) Csro,Hsro Feed Tanks , Ozone Water Storage Tank And Micron Cartridge Filter With Housing , (A) Smbs Dosing (Dechlorination),(B) Csro Feed Pump ,(C) Antiscalent Dosing,(D) Ph Dosing Ro-I,Ro-Ii , Housing And Membrane ,Plate Heat Exchanger ,Ozone Generator With Accessories ,Ozone Destructive Uv ,Vent Filter Housing ,Vent Filter Cartridge ,( E) Edi System,(F ) De-Salination By Reverse Osmosis 1St Pass (Csro)-(A) Csro High Pr Pump, (B) Ozone Recirculation Pump , Ozone Water Transfer Pump,(C) Csro Frp Hsg 3El Long 1No + 2El Long 1No, (D) Csro Membrane 8X1.1 Mt6 Nos., (E) Csro Valves, Instruments And Acessories, (G ) Hsro Water Storage Ss 304 Tank 300 L & Ozone Water Storage Tank , (H)Hsro Feed Pump , (I) De-Salination By Reverse Osmosis 2Nd Pass (Hsro)- (A) Hsro High Pr Pump,(B) Hsro Ss316 Hsg 3El Long 1No., (C) Hsro Membrane 8040 X 3 Element,(D) Hsro Valves, Instruments And Acessories, (J) Deionzatation By Edi (Hsedi)- (A) Hsedi Module Stack 1No, (B) Hsedi Valves, Instruments And Acessories, (C) Plc Based Electrical Control Panel With All The Necessary Items Like Pump, Filter, Pipe Connection Etc. For The Proper Working Of The Above Said System. Installation, Comissioning & Documentation - Dq-Iq& Oq With Training Of The Water System With Complete Set Of Documentation Do, Io,Oq. , Softwater Storage & Distribution System For Other Usage Than Plant , Storage Of Soft Water (Moc : Hdpe) - 15000 Liters- 1 No Proper Distribution Of Soft Water To The Location Points Mentioned In The Drawing With The Quantity Mentioned In The Urs As Per The Site Condition Using Pumps, Pumps, Tee, Valve, Guage, Sensor,Flow Meter, Ss 304 Pipe, Elbow , Tc Ferrule, Tc Clamp, Tc Gasket, Ph Clamp, Stud, Standard Support (Ss 304), Ss 304 Anchor Bolt/Panel Bolt, Anchor Bolt (Ms), Square Plate (Ms), Ms Angle, Plc Based Control Panelfor Online Process Instruments Sensors, Vfd For Pumps, Flow Divertion Valves With Appropriate Synchronised In Ss304 Enclosure Panel With Printer, Skid Structure For Instrumentation And Distribution System, Closed Head Orbital Welding Joints, Internal Borescope Of The Orbital Weld Joint(10%), Hydro Testing & Passivation Etc. And Any Other Items Required To Successfully Complete The Work. Please Refer Urs For The Size, Quantity And Other Details.-1 Lot , Ro/Potable Water Storage & Distribution System , Storage Of Ro Water (Moc : Hdpe) - 3000Liters-1 No. Proper Distribution Of Ro To The Location Points Mentioned In The Drawing With The Quantity Mentioned In The Urs As Per The Site Condition Using Pumps, Tee, Valve, Guage, Sensor,Flow Meter, Ss 304 Pipe, Elbow , Tc Ferrule, Tc Clamp, Tc Gasket, Ph Clamp, Stud, Standard Support (Ss 304), Ss 304 Anchor Bolt/Panel Bolt, Anchor Bolt (Ms), Square Plate (Ms), Ms Angle, Plc Based Control Panelfor Online Process Instruments Sensors, Vfd For Pumps, Flow Divertion Valves With Appropriate Synchronised In Ss304 Enclosure Panel With Printer, Skid Structure For Instrumentation And Distribution System, Closed Head Orbital Welding Joints, Internal Borescope Of The Orbital Weld Joint(10%), Hydro Testing & Passivation Etc. And Any Other Items Required To Successfully Complete The Work.-1 Lot Please Refer Urs For The Size, Quantity And Other Details. , Purified Water Storage Tanksaccessories & Distribution System , Storage Tank - 1000 Ltrs - 1 No. Liquid : Purified Water, Capacity: 1000 Litres Working, M.O.C Of All Contact Parts : Ss 316L, M.O.C Of All Non-Contact Parts : Ss 304, Type Of Tank : Torispherical Dish End Vertical, Tank Shell / Dishthk - 4Mm, Tank Insulation And Cladded With Ss 304, Tank Heat Insulation And Cladded 2Mm Thk, Tank Insulation 75Mm Thk With Rockwool, Tank Internal Electro Polished With Surface Finish<0.8Ra, Tank External Matt Dull Finish, With All Required Accessories. Distribution System & Loop System Proper Distribution And Loop System Ofpurified Water To The Location Points Mentioned In The Drawing With The Quantity Mentioned In The Urs As Per The Site Condition Using Pumps, Uv Sterliser, Pumps, Toc Analyzer, Tee, Valve, Guage, Sensor,Flow Meter,Ss 316 L Pipe, Ss 316 L Elbow , Ss 316 L Tc Ferrule, Ss 304 Tc Clamp, Tc Gasket, Ss 304 Ph Clamp,Ss 304 Stud, Standard Support (Ss 304), Ss 304 Anchor Bolt/Panel Bolt, Anchor Bolt (Ms), Square Plate (Ms), Ms Angle, Ss 304 Square Box,Ss 316 L Zero Dead Leg Valvefor Pou, Ss 316 L Hose Nipple For Userpoints, Plc Based Control Panelfor Online Process Instruments Sensors, Vfd For Pumps, Flow Divertion Valves With Appropriate Synchronised In Ss304 Enclosure Panel With Printer Etc. And Any Other Items Required To Successfully Complete The Work. Please Refer Urs For The Size, Quantity And Other Details. , Additional Softener System With Cooling Tower , Softener System For Re-Circulation Type: Resin Based Ion Exchange Type, Mounting: Vertical, Assembly Accessories: Manual Multiport Valve, Diffuser, Vacuum Breaker With Regeneration Port, Regeneration Tank ( 250L)And Drain Line, Media: Resins And Pebbles, Moc: Frp Liner, End Connection: Union End, Resin Qty: 285 L For Each Vessel, Hardness Consideredmax. Is325 Ppm, Capacity: 3.0 M3/Hr, Obr: 16Hrs/48 M3 Etc. Cooling Tower, Capacity: 10 M3/Hr;- 1No. Distribution System & Recirculation Proper Distribution Of Cooled Soft Water To The Location Points Mentioned In The Drawing With The Quantity Mentioned In The Urs As Per The Site Condition Using Pumps, Hydropneumatic Skid For Recirculation Of Cooling Tower Water, Hydropneumatic Pressure Vessel, Hydropneumatic Skid,Tee, Valve, Guage, Sensor,Flow Meter, Ss 304 Pipe, Elbow , Tc Ferrule, Tc Clamp, Tc Gasket, Ph Clamp, Stud, Standard Support (Ss 304), Ss 304 Anchor Bolt/Panel Bolt, Anchor Bolt (Ms), Square Plate (Ms), Ms Angle, Plc Based Control Panelfor Online Process Instruments Sensors, Vfd For Pumps, Flow Divertion Valves With Appropriate Synchronised In Ss304 Enclosure Panel With Printer, Skid Structure For Instrumentation And Distribution System, Closed Head Orbital Welding Joints, Internal Borescope Of The Orbital Weld Joint(10%), Hydro Testing & Passivation Etc. And Any Other Items Required To Successfully Complete The Work. Please Refer Urs For The Size, Quantity And Other Details. Storage Of Soft Water In Hdpe Storage Tank Of 0.8 Thk - 3000 Liters- 1 Nos , Ms Structural Platform 3X12 (W X L) Meter With Angle & Railing - Epoxy Painted, Etc. For The Entry Of Water Plant From Service Floor
