Tender For Renovation Of Toilets In Mecon Limited Office At Bangalore; 1 Finishing Works 2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 3 Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. 4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 5 Flooring Items 6 Providing and laying vitrified floor tiles model Silver Mist Oak of 600mm X 1200mm of M/s Kajaria Tiles or equivalent and conforming to IS: 15622 laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 7 Size of Tile 600x1200 mm 8 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge. 9 Providing and laying Vitrified tiles wall tiles model Oslo Marfil Matt of size 600mm X1200mm of M/s Kajaria Tiles or equivalent and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge. 10 Size of Tile 600x1200 mm 11 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 12 Size of Tile 600x600 mm 13 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. 14 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 15 Area of slab over 0.50 m2 16 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 17 Extra for fixing granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 18 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 19 Aluminium Works & Miscellenious 20 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. 21 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications. 22 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 23 Providing and fixing of shower cubicle of size 1050mm (W) X 1550mm (D) X 2100mm (H) similar to BESCO CUBICLE TITAN SS 2100MM model from Merino or equivalent.Size of Cubicle : As per Drawing (W) X (D) X 2100mm (H)Door Size : 1925mm (H) X 600mm (W)Divider Size : 1945mm (H)Overall Height Of Cubicle : 2100mm (Including bott om Gap of 100mm)Accessories: Standard - Merino Make Stainless Steel - 304 Grade accessories)a) SS U Channelb) SS F Channel (Only Corner Unit)c) SS Door Stopper Channeld) SS Top Raile) SS Coat Hookf) SS Privacy Thumb turn c/w Occupancy Indicatorg) SS Door Knobh) SS Spring Loaded Butt Hinges with Coveri) SS Adjustable Foot - 316 Gradej) Rubber Lining for Door Stopperk) Screws & Wall PlugsSPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438. 24 Supplying and fixing ofUrinary Panel of 12 mm thickness with High Pressure Laminates (HPL) Compact Board of Merino or EquivalentThickness of Compact Laminate : 12mmColor of HPL Boards: Single Standard and Plain Compact ColorSize of UMP : 500mm (W) X 1200mm (H)Overall Height Of UMP : 1850mm (Including bott om Gap of 650mm)Accessories: Standard - Merino Make Stainless Steel - 304 Grade accessories) - SSa) SS Right Angle Bracketsb) Screws & Wall PlugsSPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438. 25 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 26 35 mm thick both side commercial 27 Providing, making and fixing in position seasoned second class sal wood in frames of door two vertical and one horizontaldoor frame size 100x75mm, fixed with 40x3mm flat iron hold fast 200mm longincluding applying water proof wood primer and 2 coats of termite proof paint on concealed surfaces, polish in desired shade of approved make and shade over a coat of enamel paint matching with existing colour from M/s Asian Paints or equivalant. 28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery completeas per specifications and as per directions of the Engineer-in-Charge. 29 Providing and fixing Stainless Steel Grab Bar 600 mm Long with allconcealed fitting arrangements & all necessary accesories complete - Class 30 Economy 31 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge 32 SS Handles 300mm 33 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge 34 SS Tower Bolts 250x10mm 35 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 36 125x64x1.90mm 37 Supplying and installation ofrack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish. As per EN 1154. 38 Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably white) on factory pressed BWP grade marine ply as per IS 710 of approved brand . complete as per direction of engineer in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) 39 Sanitary Items 40 Providing and fixing white vitreous china flat back Urinal Catalogue no. 96014 of M/s Hindware make or equivalent, including all fittings and fixtures with flush cock Catalogue no. CON-CHR-1081A of M/s Jaquar make or equivalent, complete in all respect as per directions of Engineer-in-Charge. 41 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 42 Providing and fixing Amazon over counter wash basin Catalogue no. 91094 of M/s Hindware make or equivalent with C.I. brackets, 15 mm tall pillar cock of M/s Jaquar make (CODE : OPP-CHR-15021PM) or equivalent , 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good. 43 Providing and fixing wall mounted, white vitreous china single piecewater closet Catalogue no. 20127 of M/s Hindware make or equivalent, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 44 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 45 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 46 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 47 Kitchen sink with drain board 48 510x1040 mm bowl depth 250 mm 49 Kitchen sink without drain board 50 470x420 mm bowl depth 178 mm 51 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 52 Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class 53 Economy 54 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 55 Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class 56 Economy 57 Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class 58 Economy 59 Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class 60 Economy 61 Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class 62 Economy 63 Waterproofing Treatment on sunken floor 64 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Suprema Damp Block 2K Suprema or approved equivalent , having 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Minimum consumption shall be 1.8 kg/SQM 65 Providing & laying of protective Geotextile fabric 120GSM over the entire membrane with proper overlaps. 66 Providing and applying epoxy primer over concrete surface @150 g-200 g/sqm before application of PU Waterproofing. Subsequently after drying PU Magnum should be applied @ 1.5 per sqm to provide waterproofing of slab. PU Coating should have elongation more than 500% and tensile strength min 2.8 N/mm². Static crack bridging ability >2 mm and bonding to substrate should be >1.5 N/mm² 67 Civil Works 68 Dismantling/chipping ofbrick work/ solid block masonry in cement mortar manually/ by mechanical means at all floor levels, without affecting existing RCC column, beam, slab, etc., including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 69 Dismantling/Removal of doors, windows shutter including chowkhats, architrave, holdfasts etc. complete, at all floors and stacking to the appropriate disposal area as per direction of Engineer-in-charge.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 70 Of area 3 sq. metres and below 71 Of area beyond 3 sq. metres 72 Dismantling/ chipping/Removal of tile work in floors and dado, Granite/ Kadappa slab laid in cement mortar manually at all floors, including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 73 For thickness upto 25 mm 74 Disposal of building rubbish/malba/similar unserviceble materials including excavated earth/soil, moorum, sand, steel scrap, glazing material, pipes, etc. , dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground or any specific location for lead upto 10 km (One way shortest route possible) for all lifts, complete as per directions of Engineer-in-charge. Note:The Contractor shall take necessary permisssions/approvals from the local municipality and shall pay any statutory fees, if any, towards dumping/disposal of unserviceble materials to designated dumping grounds, rates inclusive of statutory/additional fees. 75 Lead towards carriage of building rubbish/malba/similar unserviceble materials including excavated earth/soil, moorum, sand, steel scrap, glazing material etc. dismantled or construction waste material by mechanical transport including loading, transporting, unloading, spreading and levelling in layers, as per the directions of Engineer-in-charge.Note:(i) This item shall be operated beyond the initial lead of 10km (refer item no. 4).(ii) Lead shall be measured per cum per km distance.(iii) All distances shall be measured over the shortest practical route and not necessarily the route actually taken. Route other than shortest practical route may be considered in cases of unavoidable circumstances and as approved by Engineer-in-Charge along with reasons in writing.(iv) The distance shall be measured for One way travel. 76 Dismantling/ chipping ofcement concrete manually/ by mechanical means at all floors including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 77 Dismantling/ Removal ofaluminium fixed glazing at all floors,including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 78 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 6 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbishto the appropriate disposal area as per direction of Engineer-in-charge including curing cost of materials, labour, complete as per specification.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 79 Dismantling/ Removal of existing GI pipes embedded in wall or surface mounted, both verticle & horizontal, at all floor levels, including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 80 below 40mm dia 81 above 40mm dia 82 Dismantling/ Removal of existing soil waste pipe embedded or surface mounted, both verticle & horizontal, at all floor levels,including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 83 upto 150 mm nominal dia Pipes 84 Chipping/ cutting ofR.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.Note: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively. 85 Earthwork in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out the disposal of excavated earth to designated location and lift upto 1.5 m, as directed by Engineer-in-chargeNote: Disposal of unserviceble materials beyond office premises shall be executed as per item no. 4 & 5 respectively 86 New Works 87 Providing and laying in Cement Concrete M20 for all surface level works, sunken floors etc., 10 mm downsize graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications and as per direction of Engineer-in-charge. 88 Providing and constructing load bearing wall with Solid Concrete blocks of size 300/400x100x200mm thk having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications direction of Engineer-in-charge. 89 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 90 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes heavy duty at all floor levels, for soil waste line including all uPVC fittings, this includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling, if required & testing of joints complete as per direction of Engineer in Charge. 91 80 mm nominal dia Pipes 92 100 mm nominal dia Pipes 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes at all floor levels, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 94 15 mm nominal dia pipes 95 20 mm nominal dia pipes 96 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes at all floor levelsfor Internal work - Exposed on wall, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 97 32 mm nominal dia pipes 98 50 mm nominal dia pipes 99 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Note:Make shall be as per direction of Engineer-incharge 100 25 mm nominal bore 101 50 mm nominal bore 102 Providing and laying in position Ready Mixed or Batch Mixed concrete M25 grade for Cement Concrete works in all types of Structures , using coarse aggregate and fine aggregate (Msand), Ordinary Portland Cement (OPC), admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, but excluding cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. 103 Providing, Fixing and Stripping of Shuttering for all types of shapes using good quality plywood or steel plate on steel frame for all types of structures not covered in respective items including Centering / Scaffolding, all bye works, at all levels, complete as per Drawings, specifications and directions of the Engineer-in-charge. 104 Supplying, fitting and placing TMT FE 550Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification and as per direction of Engineer-in-charge. 105 Filling in sunken area with Sinter filling, including cost of all materials, labour, for all lead & lift at all levels, etc complete as per direction of Engineer in Charge. 106 Providing, supplying and fixing in position Wedge Anchor bolts of 75mm long in RCC/Masonry including all bye works complete, as per instruction of Engineer-in-charge.Note: Make - HILTI, FISCHER or equivalent make, as per direction of engineer 107 Supply and fixing of steel work welded in all sections/framed work using angles, channels, I-sections, Box sections, chequered plates etc., including cutting, hoisting, fixing in position in RCC or masonry, necessary welding and applying a priming coat of approved steel primer using structural steel etc. as required, as per direction of Engineer-in-Charge. 108 In steel frames, manhole cover, chequered plates, guard bar, railing, bracket etc. 109 Luminaires & Fans:Supply and fixing of following 110 36W, SURFACE MOUNTED TYPE SQUARE LIGHT FIXTURE SIMILAR TOMODEL NO LTSAQ-36-C MAKE - ORIENT 111 EXHAUST FAN, STEEL BODY, AC SINGLE PHASE. 230V OF SIZE 300MM SWEP WITH BLADES AND FRAME AND LOUVERS 112 12W, SURFACE MOUNTED TYPE SQUARE LIGHT FIXTURE SIMILAR TOMODEL NO LDSES-12-CMAKE Orient 113 SUPPLY AND FIXING OF MODULAR POWER SOCKETS 114 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 115 Supplying and fixing 3 pin, 5 A ceiling rose (for exhaust fan) on the existing junction box including connections etc. as required. 116 Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc. as required. 117 White cover plate with frame, 4 module 118 White cover plate with frame, 6 module 119 White cover plate with frame, 8 module 120 Supplyingand fixingfollowingmodularswitch/socketonthe existing modular plate & switch box including connections but excluding modular plate etc. as required. 121 6A switch 122 Wiring from existing LDB to switchbox & to Circuit/6A/16A power socket outlet, Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 123 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DB to SB & Looping for one SB to Other SB) 124 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (DB to 6/16A Socket) 125 Point Wiring (Wiring with copper conductor FRLS cable in PVC conduits-from SB to Lights/fans with switches etc) 126 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 127 Each additional light point controlled from item no. EL-6a 128 Dummy Plates for 6A Switch
