|
| 1 | Note1:- Removal of Existing componants of following MES Pattern Furniture Item\"s Carefully without disturbing the adjoining Parts ,supply and fix new componants of samepatternas per Drg in lieu of Dismantled /DiscordedcomponantsincludingTightingthe Joints, Pinning , Screwing, wedging, Gluing, Providing Hinges, Placing every part in- tact condition.2:- Cleaning,Derusting of Stain/Dirt, old Paint/Polish with Grinder machine or Sand Paper as required and as directed making the Surface smooth filling the holes with putty where ever required and Applying two coats of Syenthetic Enamel Paints over a coat of Red oxide primer with spray machine on steel item\"s and two coat of French Polish on wooden Item\"s over a coat of Wood Primer.3:- Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Polishing/ Painting on whole Items should be matched with the remaining item\"s and desired finish shall be obtained.4:- The Furniture Article received from occupants/users units subsequently issue for necessary repair/maints andPainting/Polishing to the contractor through nominal issue voucher (NIV) mentioning the date of issue duly signed by the contractor. The contractor shall return these furniture articles aftercompletion of necessary repair work on or before 30 days from the date of issue and nominal receipt voucher (NRV) shall be prepared dully signed by furniture I/C, Engineer-in-Charge and contractor.5:- Generally the periodicity for issue of furniture from BSO yard shall be once or twice in a month (reckoning from date of commencement of work as per W.O No 1 ) subjected to the users requirement /availability of furniture for repair works. However repairable furniture shall be issued not more than 20 % of total qty of CA provision in one month.6:- Work will be executed where the Furniture Item\"s exist in different user unit\"s of BSO GE ( South) Secunderabad including Furniture yard of BSO South Sub Division. |
| 2 | Bed Hard Steel Drawing No :- FD/E6/MAP/08 (R) Dismantling of old unserviceble Ply top from Hard Bed,supply and fix new 12 mm thick plywood of suitable size, ISI marked BWR Grade phenol bonded commercial plywood (Make:-Greenply/Archid ply/Century/Kitply) with suitable size nut and bolts all as shown on drawingcomplete all as specified and as directed |
| 3 | Dismantling of old unserviceble particle board from Head Board of bed ,supply and fix newboard made from 18 mm thick pre laminated MDF Board Exterior Grade (Make:- Greenply / Century / Action Tesa) with suitable size screw. All around side of board shall be covered withPVC Edge Band Tape 1.6 to 2.0 mm thick (Make :- Rehau ,Pegasus, kynex) fixed with suitable adhesive complete all as directed. |
| 4 | All as per Ser No 2.00 above, but Foot Board of Bed Hard Steel as per drawing and complete all as specified and as directed |
| 5 | Welding to broken joints of Hard Bed complete all as specified and as directed |
| 6 | Dismantling of old unserviceble Nuts of long rail ,supply and fix New Nuts drawing and complete all as specified and as directed |
| 7 | Dismantling of old unserviceble Rubber Shoes ,supply and fix new Hard Rubber Shoes as per sample approved rest complete all as specified and as directed |
| 8 | Table Bed Side Drawing No:-FD/E6/MAP/15, FD/E6/MAP/15 (R). Dismantling of old unserviceble particle board from Top of Table ,supply and fix new Topof Table made from 18 mm thick pre laminated MDF board Exterior Grade (Make:- Greenply/ Century/ Action Tesa) with suitable size screw all around side of board shall be covered with First Class Teak Wood Beading 18/19 mm wide X 04 mm thick dully French polishedwith suitable adhesive and headless stainless nailscomplete all as directed |
| 9 | All as per Ser No 7.00 above, butSides of Table Bed Side as per drawing and complete all as specified and as directed |
| 10 | All as per Ser No 7.00 above, but Upper Drawer of Table Bed Side as per drawing and complete all as specified and as directed |
| 11 | All as per Ser No 7.00 above, but Lower Drawer of Table Bed Side as per drawing and complete all as specified and as directed |
| 12 | Dismantling of old unserviceble Back Ply of Table Bed Side ,supply and fix New Back Ply 12 mm thick BWR grade (Make:- Greenply / Archid ply / Kitply/ Century) of suitable size dully fitted with screw and adhesivecomplete all as specified and as directed |
| 13 | Dismantling of old unserviceble Ply of Drawer Table Bed Side ,supply and fix New Ply BWR grade(Make:- Greenply/Archid ply/Kitply/Century) of suitable size dully fitted withscrew and adhesivecomplete all as specified and as directed |
| 14 | Dismantling of old unserviceble Teakwood runner,supply and fix New Teakwood runnerwith suitable size screw and adhesivecomplete all as specified and as directed |
| 15 | Dismantling of old unserviceble Handle,supply and fix New Stainless Steel handle dully fixed with suitable size screwcomplete all as directed. |
| 16 | Dismantling of old unserviceble Legs,supply and fix New Legs made from 18 mm MSSquare Pipe 18 Gauze dully painted with black colour synthetic enamelcomplete all as directed. |
| 17 | Dismantling of old unserviceble Rubber shoe,supply and fix New Hard Rubber/PVC Shoe complete all as directed. |
| 18 | Teapoy Verandah Drawing No:-FD/E6/MAP/17.Dismantling of old unserviceble top of table, supply and fix new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply)all around sides covered withPVC Edge Band Tape 1.6 to 2.0 mm thick(Make :- Rehau ,Pegasus, kynex) with strong bonded chemical adhesive through hot pressed machine as specified and as directed. |
| 19 | Dismantling of old unserviceble missing 5 mm dia MS Bar ,supply and fix New5 mm dia MS Bar dully painted with black colour synthetic enamel complete all as directed. |
| 20 | Dismantling of old unserviceble Rubber shoes,supply and fix New Hard Rubber/PVC Shoes complete all as directed. |
| 21 | Chair Writing Drawing No:- FD/E6/MAP/12.Dismantling of old unserviceble Tapestry Cloth from seat of chair ,supply and fix new Tapestry Cloth of seatwith new PVC Lipping all around it complete all as specified and as directed (Note:- Rate of Tapestry cloth should be not less than 150/- per meter.) |
| 22 | All as per Ser No 20.00 above, butBack of Chair Writing as per drawing and complete all as specified and as directed |
| 23 | Dismantling of old unserviceble Handle,supply and fix New Black PU Handle drawing and complete all as specified and as directed |
| 24 | Dismantling of old unserviceble PU foam of seat,supply and fix New PU Foam of seatdrawing and complete all as specified and as directed |
| 25 | Dismantling of old unserviceble PU foam of back,supply and fix New PU Foam of backdrawing and complete all as specified and as directed |
| 26 | Dismantling of old unserviceble Rubber stopper,supply and fix New Hard Rubber Stopper complete all as specified and as directed. |
| 27 | Chair Verandah Drawing No:- FD-359. Cutting and Dismantling of old unservicebleCane from Chair verandah and removing the dirt and rust from sand paper filling the holes with putty and applying two coat ofsynthetic enamel white paint Re-canningwith cane plastic white05 to 06 mm wide and 0.5 mm thick as approved complete all as shown on drawing and complete all as specified and as directed. |
| 28 | Chair Verandah Drawing No:- FD-256. Cutting and Dismantling of old unserviceble Newar from Chair verandah and removing the dirt and rust from sand paper filling the holes with putty and applying two coat ofsynthetic enamel white paint Reweaving the Chair Verandah with New 50-55 mm wide virgin quality pure whiteNylon Newar weaved in V-shape ( not made out of recycled material) of approved quality closely inter-knitted from both sides and all joints must be stiched with nylon thread duly covered with a piece of leathrite suitable size complete all as specified & directed complete all as shown on drawing and complete all as specified and as directed. ( Note:- Quality of Nylon Newar :- Exclusively as per sample kept with BSO GE (S) Secunderabad) |
| 29 | Chair Verandah Drawing No:- FD/MAP-II/06.Dismantling of old unserviceblePVC/PPCP seat and back of each Chair Verandah and removing the dirt and rust from sand paper filling the holes with putty and applying two coat ofsynthetic enamel white paint,supply and fixing new PVC Sheet and back 04 mm thick with suitable size screwweight not less than 1.85 Kgof seat and back of Make:- Harmony/AMKO or any other approved make as specified as perdrawingand complete all as specified and as directed. |
| 30 | Welding to broken joints of All Type of Chair varandahcomplete all as specified and as directed. |
| 31 | Dismantling of old unserviceble Rubber shoes from all types of chair verandah ,supply and fix newPVC/Hard Rubber shoes of superior quality as specified in drawingscomplete all as specified and as directed |
| 32 | Almirah Large Steel /Almirah Medium Steel /Almirah 1/2 H x 1/2 S steel. Drawing No:- FD-67(M),351, 339,1031,350,1032,114,1033. Dismantling of old unservicebleHandle from All Types of Almirah ,supply and fix New Chrom Plated SteelHandle 100 to 125mm Long including Nut and Bolt with Washer complete as per existing shape and sizeas perdrawing and complete all as specified and as directed. |
| 33 | Dismantling of old unservicebleLock from All Types of Almirah ,supply and fix New Lock with Duplicate Keys Make:- Godrej / Harrisson/ Link or any others make as approved by Engineer- in-charge as per requirements of site complete as per existing shape and size as perdrawingand complete all as specified and as directed. |
| 34 | Dismantling of old unserviceble Butt Hinges from All Types of Almirah ,supply and fix New Stainless Steel Butt Hinges complete as per existing shape and size as perdrawingand complete all as specified and as directed. |
| 35 | Dismantling of old unserviceble Rusted Each Legsof All Types of Almirah ,supply and fix New Legs dully Painted complete as per existing shape and size as perdrawingand complete all as specified and as directed. |
| 36 | Dismantling of old unserviceble Rusted Shelves of All Types of Almirah ,supply and fix New Shelves dully Painted complete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 37 | Dismantling of old unservicebleclamps/clips and adjustment of existing shelves by providing New clamps/clips as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 38 | Dismantling of old unserviceble/rusted three way locking device ,supply and fix new locking device complete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 39 | Dismantling of old unserviceble missing hanging Rodfrom Almirah 1/2 Hx1/2 S ,supply and fixing new chrom plated steel hanging Rod as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 40 | Dismantling of old unserviceble, missing Lock cover,supply and fix new lock cover inside of Almirah as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 41 | Locker Bed Side Steel (Moveable and Built-In )Drawing No:- FD-1029/257. Dismantling of old unserviceble Handle ,supply and fix New Handle 100 mm long Chrom Plated Steelincluding Nut and Bolt with Washer complete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 42 | Dismantling of old unserviceble Butt Hinges,supply and fix New Butt Hinges complete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 43 | Dismantling of old unserviceble Hasp and Staple,supply and fix New Stainless Steel Hasp and Staple complete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 44 | Dismantling of old unserviceble Hanging Rod of,supply and fix New Hanging Chrom Plated Rodcomplete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 45 | Dismantling of old unserviceble Rustedof Legsof All Types of Locker ,supply and fix New Legs dully Painted complete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 46 | Dismantling of old unserviceble /Rusted Shelves of Locker Bed side steel ,supply and fix New Shelves dully Painted complete as per existing shape and size as perdrawing and complete all as specified and as directed. |
| 47 | Teapoy Varandah FD-35, 208, 255.Dismantling of old unserviceable top of table & supply and fix new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa/Century/Greenply) 1.6 to 2.0 mmthick PVC Edge Band Tape of approved shades (Make:- Rehau, Pegasus, Kynex) shall be fixed on all around sides with strong bonded chemical adhesive through hot pressed machine complete all as specified and as directed. |
| 48 | Dismantling of old unserviceble Legs,supply and fix new Legs of 20 mm dia MS conduit pipe as perdrawing and complete all as specified and as directed. |
| 49 | Dismantling of old unserviceble Frame,supply and fix new Frame of 25 mm x 03 mm Flat Iron as perdrawingcomplete all as specified and as directed |
| 50 | Dismantling of old unserviceble stiffner,supply and fix new stiffner of conduit pipe as perdrawing complete all as specified and as directed |
| 51 | Dismantling of old unserviceble Shoes/Toes,supply and fix new Hard Rubber/PVC Shoes Toes as perdrawingcomplete all as specified and as directed |
| 52 | Chair Revolving / Executive. Trade Pattern.Dismantling of old unserviceble Tapestry Cloth from seat of chair ,supply and fix new Tapestry Cloth of seatwith new PVC Lipping all around it complete all as specified and as directed (Note:- Rate of Tapestry cloth should be not less than 150/- per meter.) |
| 53 | All as per Ser No 51.00 above, but Back of Chair Revolving/Chair Executive as per drawing and complete all as specified and as directed |
| 54 | Dismantling of old unserviceble Handle,supply and fix New Black PU Handle drawing and complete all as specified and as directed |
| 55 | Dismantling of old unserviceble PU Cushion foam of seat ,supply and fix New PU Cushion Foam of seatdrawing and complete all as specified and as directed |
| 56 | Dismantling of old unserviceble PU Cushion foam of back,supply and fix New PU Cushion Foam of backdrawing and complete all as specified and as directed |
| 57 | Dismantling of old unserviceable Hydraulic System of Chair,supply and fix of New Hydraulic Systemcomplete all as specified and as directed |
| 58 | Dismantling of old unserviceble Base of Chair,supply and fix new Base made of Nylon Material with castor wheel 50 mm for stability and easy movementcomplete all as specified and as directed |
| 59 | Dismantling of old unserviceble castor wheel ,supply and fix new Castor wheelcomplete all as specified and as directed |
| 60 | Dismantling of old unserviceble push back system of chair,supply and fix new Push back Systemcomplete all as specified and as directed |
| 61 | Chair CB Steel with Arms. Drawing No:- FD 75(M) Dismantling of old unserviceable plastic cane for seat of chair with arms and canning with white pvc cane of size 2 mm wide x 0.5 mm thick and border with white pvc cane 4 mm wide x 0.5 mm thick superior quality Godrej Pattern as per drawing and complete all as specified and as directed. |
| 62 | All as per Ser No 60.00 above, but Back of Chair CB Steel with Arms as per drawing and complete all as specified and as directed |
| 63 | Dismantling of old unserviceable broken seat of chair CB Steel with Arms ,supply and fix new seat frame made ofwith first class hard wood teak and canning with white pvc cane of size 2 mm wide x 0.5 mm thick and border with white pvc cane 4 mm wide x 0.5 mm thick superior quality Godrej Pattern as per drawing and dully polishedwith two coat ofFrench Polish over a coat of wood primer as specified indrawing complete all as specified and as directed |
| 64 | All as per Ser No 62.00 above, but Back of Chair CB Steel with Arms as per drawing and complete all as specified and as directed |
| 65 | Dismantling of old unserviceable broken Arm Rest of chair ,supply and fix new Arm Rest is made with first class hard wood teak dully polishedwith two coat ofFrench Polish over a coat of wood primer with suitable size screw as specified indrawing complete all as specified and as directed |
| 66 | Dismantling of old unserviceable mild steel support ,supply and fix new mild steel support with running welding for joining conduit made out of 50 mm x 35 mm x 3 mm mild steel sheet dully painted with two coat of synthetic enamel over a coat of Red oxide primer as specified indrawing complete all as specified and as directed |
| 67 | Dismantling of old unserviceable PVC / Rubber Shoes and Caps/ Plugs ,supply and fix New PVC / Rubber Shoes and Caps / Plugs with stainless steel screw where ever required as specified indrawing complete all as specified and as directed |
| 68 | Chair CB Steel without Arms Drawing No:- FD 75(M) Dismantling of old unserviceable plastic cane for seat of Chair CB Steel without arms and canning with white pvc cane of size 2 mm wide x 0.5 mm thick and border with white pvc cane 4 mm wide x 0.5 mm thick superior quality Godrej Pattern as per drawing complete all as specified and as directed |
| 69 | All as per Ser No 67.00 above, but Back of Chair CB Steel without Arms as per drawing and complete all as specified and as directed |
| 70 | Dismantling of old unserviceable broken seat of chair CB Steel Without Arms ,supply and fix new seat frame of seat is made with first class hard wood teak and canning with white pvc cane of size 2 mm wide x 0.5 mm thick and border with white pvc cane 4 mm wide x 0.5 mm thick superior quality Godrej Pattern as per drawing and dully polishedwith two coat ofFrench Polish over a coat of wood primer as specified indrawing complete all as specified and as directed |
| 71 | All as per Ser No 69.00 above, but Back of Chair CB Steel without Arms as per drawing and complete all as specified and as directed |
| 72 | Dismantling of old unserviceable mild steel support ,supply and fix supply and fix new mild steel support with running welding for joining conduit made out of 50 mm x 35 mm x 3 mm mild steel sheet dully painted with two coat of synthetic enamel over a coat of Red oxide primer as specified indrawing complete all as specified and as directed |
| 73 | Dismantling of old unserviceable PVC / Rubber Shoes and Caps/ Plugs ,supply and fix New PVC / Rubber Shoes and Caps / Plugs with stainless steel screw where ever required as specified in drawing complete all as specified and as directed |
| 74 | Table office Clerk Steel Drawing No :- FD-84(M), 381, 307, 1004.Dismantling of old unserviceble top of table & supply and fix new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply)all around sides covered withPVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specifiedcomplete all as specified and as directed |
| 75 | Dismantling of old unserviceble Legs ,supply and fix new Legs of mild steel square tube 25 mm as per existing shape and size complete all as specified and as directed. |
| 76 | Dismantling of old unserviceble stiffner ,supply and fix new stiffner of mild steel square tube 25 mm as per existing shape and size. complete all as specified and as directed |
| 77 | Dismantling of old unserviceble Lock of Drawer,supply and fix new Lock Make:-Godrej/Harrisson/Link or any others make as approved by Engineer- in-chargeas perdrawingcomplete all as specified and as directed. |
| 78 | Dismantling of old unserviceble Shoes/Toes,supply and fix new Hard Rubber/PVC Shoes/ Toes as perdrawing complete all as specified and as directed. |
| 79 | Table 3\"x2\" with out Drawer Steel & with Drawer SteelDrawing No :- FD-1007, FD-1008 . Dismantling of old unserviceble top of table & supply and fix new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply)all around sides covered withPVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specifiedcomplete all as specified and as directed |
| 80 | Dismantling of old unserviceble Legs,supply and fix new Legs of mild steel square tube 25 mm as per existing shape and size. complete all as specified and as directed |
| 81 | Dismantling of old unserviceble stiffner,supply and fix new stiffner of mild steel square tube 25 mm as per existing shape and size. complete all as specified and as directed |
| 82 | Dismantling of old unserviceble Lock of Drawer,supply and fix new Lock Make:-Godrej/Harrisson/Link or any others make as approved by Engineer- in-chargeas perdrawing . complete all as specified and as directed |
| 83 | Dismantling of old unserviceble Shoes/Toes ,supply and fix new Hard Rubber/PVC Shoes/ Toes as perdrawing . complete all as specified and as directed |
| 84 | Chair Computer Drawing No :- FD/E6/MAP/01 & Trade Pattern. Dismantling of old unserviceble Tapestry Cloth from seat of chair ,supply and fix new Tapestry Cloth of seatwith new PVC Lipping all around it complete all as specified and as directed (Note:- Rate of Tapestry cloth should be not less than 150/- per meter.) |
| 85 | All as per Ser No 83.00 above, but Back of Chair Computer as per drawing and complete all as specified and as directed |
| 86 | Dismantling of old unserviceble Handle,supply and fix New Black PU Handle drawing and complete all as specified and as directed |
| 87 | Dismantling of old unserviceble PU Cushion foam of seat ,supply and fix New PU Cushion Foam of seatdrawing and complete all as specified and as directed |
| 88 | Dismantling of old unserviceble PU Cushion foam of back,supply and fix New PU Cushion Foam of backdrawing and complete all as specified and as directed |
| 89 | Dismantling of old unserviceable Hydraulic System of Chair,supply and fix of New Hydraulic Systemcomplete all as specified and as directed |
| 90 | Dismantling of old unserviceble Base of Chair,supply and fix new Base made of Nylon Material with castor wheel 50 mm for stability and easy movementcomplete all as specified and as directed |
| 91 | Dismantling of old unserviceble castor wheel,supply and fix new Castor wheel acomplete all as specified and as directed. |
| 92 | Charpoy Hard Top Drawing No:- FD/MAP-II/01 Dismantling of old unserviceble Ply top from Hard Bed,supply and fix new 12 mm thick plywood of suitable size, ISI marked BWR Grade phenol bonded commercial plywood (Make:-Greenply/Archid ply/Century/Kitply) with suitable size nut and bolts all as shown on drawingcomplete all as specified and as directed |
| 93 | Removing of old unserviceble Hard Rubber Shoes,supply and fix New Hard Rubber Shoes Complete. |
| 94 | Removing of old paintwith paint remover or with solvent and making the surface smooth by rubbing it with emery paper and grinder machine filling the holes with putty and applying one coat of red oxide primer after this external and internal surface ofshould be painted with two coat of synthetic enamel paint with spray machine shade as approved by Garrisson Engineer or Engineer-in-Charge rest all as directed .Bed Hard Steel. Drawing No :- FD/E6/MAP/08 (R) |
| 95 | Table Bed Side (MAP) Drawing No :- FD/E6/MAP/15, complete all as specified and as directedFD/E6/MAP/15 (R). |
| 96 | Chair Writing . Drawing No:-FD/E6/MAP/12. complete all as specified and as directed |
| 97 | Almirah Large Steel. Drawing No:- FD- 67(M), 351, 339 ,1031complete all as specified and as directed |
| 98 | Almirah Medium Steel. Drawing No:-FD- 67(M), 350, 340 ,1032complete all as specified and as directed |
| 99 | Almirah Large 1/2 X 1/2 S Steel. Drawing No:- FD- 114(M) , 1033complete all as specified and as directed |
| 100 | Locker Steel. Drawing No :- FD-1029/257complete all as specified and as directed |
| 101 | Teapoy Varandah FD-35, 208, 255. complete all as specified and as directed |
| 102 | Teapoy Verandah Drawing No:-FD/E6/MAP/17.complete all as specified and as directed |
| 103 | Chair CB SteelDrawing No :- FD-75 (M)complete all as specified and as directed |
| 104 | Chair CBA SteelDrawing No :- FD-75 (M)complete all as specified and as directed |
| 105 | Table office Clerk Steel Drawing No :- FD-84, 307, 1004complete all as specified and as directed |
| 106 | Table 3\"x2\" with Drawer Steel Drawing No :- FD-1008complete all as specified and as directed |
| 107 | Table 3\"x2\" with out Drawer Steel Drawing No :- FD-1007complete all as specified and as directed |
| 108 | Box Kit Steel Drawing No:- FD-98complete all as specified and as directed |
| 109 | Trestle Store Room Steel Drawing No :- FD-86, 347, 1043complete all as specified and as directed |
| 110 | Book Shelf Open Large Steel Drawing No :- FD-69 (M)complete all as specified and as directed |
| 111 | Rack Six Tier Steel Drawing No :- CEHZ & FD-01Rcomplete all as specified and as directed |
| 112 | Rack Steel Drawing No :- TP complete all as specified and as directed |
| 113 | Stool Steel Drawing No :- FD-81complete all as specified and as directed |
| 114 | Book Case Steel Drawing No :- FD- 90 (M)complete all as specified and as directed |
| 115 | Charpoy Folding IP with Nylon Newar and Ply top Drawing No FD-388 , FD-388 ( R).complete all as specified and as directed |
| 116 | Charpoy Hard Top Drawing No:- FD/MAP-II/01complete all as specified and as directed |
