Bids Are Invited For NP25005730 REAMER LONG (100 MM) DIA-9.5MM H-7 2 REAMER NP25005731 DIA-11.11MM H-7 TWO STEP DRILL SIZE: 4.1MM, DRILL DIA.: 4.1MM DIA PILOT: 3.2MM OVERALL LENGTH (MM): 130 MM MATERIAL: M42 3 NP25005771 NOTE: 1-DIMENSIONAL INSPECTION REPORT IS REQUIRED FOR EACH DRILL ALONG WITH SUPPLY FOR ACCEPTANCE. 2- MATERIAL TEST CERTIFICATE IS REQUIRED ALONG WITH DRILL 3- CONDITION: BRAND NEW TWO STEP DRILL SIZE: 4.07MM, DRILL DIA.: 4.07MM DIA PILOT: 3.2MM OVERALL LENGTH (MM): 90 MM MATERIAL: M42 NP25005766 5 NOTE: 1- DIMENSIONAL INSPECTION REPORT IS REQUIRED FOR EACH DRILL ALONG WITH SUPPLY FOR ACCEPTANCE. 2- MATERIAL TEST CERTIFICATE IS REQUIRED ALONG WITH DRILL 3-CONDITION: BRAND NEW TWO STEP DRILL SIZE: 4.75MM DRILL DIA: 4.75MM DIA PILOT: 3.2MM OVERALL LENGTH (MM): 45 MM MATERIAL:M42 NP25005767 NOTE: 1-DIMENSIONAL INSPECTION REPORT IS REQUIRED FOR EACH DRILL ALONG WITH SUPPLY FOR ACCEPTANCE. 3- CONDITION: BRAND NEW 1 2- MATERIAL TEST CERTIFICATE IS REQUIRED ALONG WITH DRILL TWO STEP DRILL DRILL DIA: 4.75MM DIA PILOT: 3.2MM OVERALL LENGTH (MM): 130 MM MATERIAL: M42 6 NP25005765 NOTE: 1-DIMENSIONAL INSPECTION REPORT IS REQUIRED FOR EACH DRILL ALONG WITH SUPPLY FOR ACCEPTANCE. 2- MATERIAL TEST CERTIFICATE IS REQUIRED ALONG WITH DRILL. 3- CONDITION: BRAND NEW 7 HSS TWIST DRILL EXT.LONG 8X1/8P/S, HSS TWIST DRILL PARELLEL SHANK EXTRA LONG NP25004498 SIZE: 8 X 1/8 (15:7823/75) 8 NP25004499 HSS TWIST DRILL P/S EXT. LONG8X5/32, H S S TWIST DRILL PARELLEL SHANK EXTRA LONG SIZE: 8 X 5/32 (15:599/1960) 9 HSS TWIST DRILL P/S 3/32, HSS TWIST DRILL P/S NP25003249 DIA: 3/32 (2.38) F/L: 28-30MM OAL: 56-58MM HSS HACKSAW BLADE ROUGH 18TPI, HSS HAND HACKSAW BLADE ROUGH 18 ΤΡΙ SIZE: LENGTH 300 MM X WIDTH 12.5 MM X THIKNESS 0.63 MM X 18 ΤΡΙ (IN PACKING OF 100 BLADES) 10 NP25004046 AS PER STANDARD IS: 2594 Remarks: Vendors are required to give product catalogue, make and part no. of quoted items for technical acceptance RH TURNING TOOLKIT (DDJNR SET)SH20MM, TURNING TOOL KIT FOR ROUGHING APPLICATION WITH FOLLOWING SPECIFICATIONS: a) RIGHT HAND TURNING HOLDER WITH SHANK 2020, LEAD ANGLE 93 DEG & TOP CLAMP TYPE DDJNR2020K15** QTY-03 NOS 11 b) INSERTS WITH R0.8mm, POSITIVE GEOMETRY WITH 6 DEG. PROFILE WITH GRADE P20 OR EQUIVALENT NP25004965 12 *DNMG150608MP **QTY-200 NOS c) INSERTS WITH R0.8mm, POSITIVE GEOMETRY WITH 6 DEG. PROFILE WITH GRADE K10 OR EQUIVALENT *DNMG150608MS**QTY-150 NOS d) SPARES-SHIM, SHIM SCREW, INSERT SCREW-10 NOS EACH e) SPARE TORX KEY-04 NOS PARALLEL SHANK TWIST DRILL DIA:2.8MM, PARALLEL SHANK TWIST DRILLDIA:2.8MM SIZE DIA:2.8MM X FL34MM X OAL60MM MATERIAL: M42 NP25005779 Flute Length (FL) and Over All length (OAL) mention are approximate dimensions; vendor may quote standard dimensions also. However, HAL Kanpur has the right to choose or reject any deviation as per requirement by user department. HSS DRILL TWIST P/S 6.6MM, HSS TWIST DRILL PARALLEL SHANK SIZE: 6.6mm X FL-65MM X OAL-100MM FLUTE LENGTH: 63 mm (Min.) OVER ALL LENGTH: 101 mm (Min.) MATERIAL: HSS-M42 STANDARD: IS:1501/19/EQUIVALENT 13 NP25005159 REMARK: 1. VENDOR IS REQUIRED TO PROVIDE TECHNICAL LEAFLET SHOWING COMPLETE INFORMATION OF QUOTED PRODUCT AS PER RFQ REQUIREMENT ALONG WITH THE QUOTE. 2- SUPPLIED ITEM SHOULD BE PERMANENTLY MARKED / ENGRAVED DIA, MATERIAL AND MANUFACTURER TRADE MARK. 3.VENDORS ARE REQUIRED TO PROVIDE A COPY OF AUTHORIZED DISTRIBUTOR CERTIFICATE IN CASE OF DISTRIBUTOR ALONG WITH QUOTATION. 4- CONDITION: BRAND NEW 14 NP25001907 HSS TWIST DRILL P/S 4.0MMIS1501/19, HSS TWIST DRILL P/S SIZE DIA: 4.0MM, F/L: 45-47MM & OAL: 75-77MM HSS TWIST DRILL P/S 3.2MM IS1501/19 DRILL DIA 3.2 MM OVERALL LENGTH: 50 (+1.5) MM FLUTE LENGTH: 22 (+/- 1.5) MM MATERIAL: HSS-M42 15 NP25001904 NOTE: 1- DIMENSIONAL INSPECTION REPORT IS REQUIRED FOR EACH DRILL ALONG WITH SUPPLY FOR ACCEPTANCE. 2- MATERIAL TEST CERTIFICATE IS REQUIRED ALONG WITH DRILL. 3-CONDITION: BRAND NEW SOLIDCARBIDE TWIST DRILL 3.2MM, SOLIDCARBIDE TWIST DRILL 3.2MM, SOLID CARBIDE TWIST DRILL P/S SIZE: 3.2mm FLUTE LENGTH-18.00mm OVER ALL LENGTH-49.00mm 16 NP25002691 Remarks:- 1. Vendors are required to provide technical catalogue along with quotation clearly specifying part no. of quoted items. 2. Vendors are required to submit copy of authorized distributor certificate of quoted item otherwise quote will not be considered. 17 NP25005916 CORDLESS POWER SCREW DRIVER, CORDLESS POWER SCREW DRIVER (with charger, battery , spare battery ) Handle type Pistol Forward and Reverse feature yes Adjustable Clutch yes Spare battery yes Charger yes Chuck size in Inches 1/2 inches Battery Voltage in volts 18V Battery Capacity in ampere hr 1.5 Amp-Hr or more Variable speed yes No. of torque settings 07 or more weather screw driver bits supplied yes No. of screw driver bits supplied 02 flat, 02 phillips Battery protection for overload or overheating yes LED light available for working in dark yes Warranty 01 years Carry case supplied yes Type of battery Lithium ion 15 NOS 18 NP25006060 CUTTER PLIER LENGTH 165 MM, CUTTER PLIER LENGTH 165 MM Type of Hand Tool Side Cutting Pliers as per IS 4378 Type of Insulation Rubber/PVC/NYLON Insulation Shape of Handles Flared handle Type of Joint Single Joint Type of Gripping Surface Plain Type of Cutter End Cutter Tool Finish- Natural finish/chemically produced phosphaste coating/ nickel plated/chrome plated Handle Finish - Smooth finished Electrical insulation yes Material Carbon Steel Hardness of Gripping Surafce (Must be in between 35 <=N<=50HRC) Yes Hardness near Cutting Edge (Must be in between 50 <=N<=70HRC) Yes length of hand tool in mm 165 MM (Approx) weight of hand tool in grams 185 G. (Approx) width of hand tool in mm 18 MM (Approx) Jaw length of hand tool in mm 12 MM (Approx) Jaw tickness of hand tool in mm 8 MM (Approx) 40 NOS 19 NP25005326 NOSE PLIER, NOSE PLIER Type of Hand Tool Long Nose Pliers asper IS 3552 Type of Insulation Rubber/PVC/Nylon Insulation Shape of Handles Bowed handle Type of Joint : Lay-on joint Type of Gripping Surface : Plain Type of cutter : End cutter Shape of Nose : Convex Tool Finish- Natural finish/chemically produced phosphast/nickelplating/chrome plating Handle Finish Smooth finished Material Alloy Steel Hardness of Gripping Surafce (Must be in between 35 <=N<=50HRC) Yes Hardness near Cutting Edge (Must be in between 50 <=N<=70HRC) Yes length of hand tool in mm 185 MM (Approx) weight of hand tool in grams 185 G. (Approx) width of hand tool in mm 52 MM (Approx) Jaw length of hand tool in mm 55 MM (Approx) Jaw tickness of hand tool in mm 11 MM (Approx) 40 NOS 20 NP25006066 REMOVABLE OIL CAN, REMOVABLE OIL CAN Type of spout Removable Handle with oil can Yes Dispencing Manual Pumping Material of oil can stainless steel/ Alloy steel/Mild steel Material of nozzle stainless steel/ Alloy steel/Mild steel with zinc plating Capacity of oil can in mm 250 approx Length of spout in mm 150 Approx Outer Diameter of spout tip in mm 4 to 5 MM Inner Diameter of spout tip in mm 2 to 3 MM Diameter of filling hole in mm 25 to 30 MM Finish Galvanised /chrome plated /Powder coated 60 NOS 21 NP25006061 COMBINATION PLIER 175 MM, COMBINATION PLIER 175 MM Type of Hand Tool Combination Pliers as IS 3650-1981 per IS 4378 Type of Insulation Rubber/PVC/NYLON Insulation Shape of Handles Straight handle Type of Joint Single Joint Type of Gripping Surface : serrated with pipe grip Type of Cutter : Middle Cutter Tool Finish Natural finish/chemically produced phosphaste coating/ nickel plated/chrome plated Handle Finish - Smooth finished Electrical insulation- Yes Material Carbon Steel Hardness of Gripping Surafce (Must be in between 35 <=N<=50HRC) Yes Hardness near Cutting Edge (Must be in between 50 <=N<=70HRC) Yes length of hand tool in mm 175 MM (Approx) weight of hand tool in grams 185 MM (Approx) width of hand tool in mm 27 MM (Approx) Jaw length of hand tool in mm 55 MM (Approx) Jaw tickness of hand tool in mm 10 MM (Approx) 40 NOS 22 NP25006062 ROUND M8 ENGINNERS SCREW DRIVER, ROUND M8 ENGINNERS SCREW DRIVER Conformity to standards IS : 844 Part l and Part ll latest Screw driver point size or tip size(axb) in mm 2.0 MM X 13.0 MM Shape of blade Round Length of blade in mm 350 MM size of head M 8 Weight of screw driver in grams 50-70 G. Insulation on blade No Blade of screw driver shall be protected against rust by plating with Nickel, chromium or zinc Yes Blade shall be free from seams , burrs, cracks and other manufacturing defects Yes Blade shall be finished smooth and bright all over Yes Handle should be provided with proper serration to avoid slip Yes Material of blade Steel/forged steel/alloy steel Material of handle Plastic/nylon/fibre Length of handle in mm 100 MM Handle shall be finished smooth and convenient in holding Yes Screw driver point should be ground blunt and shall lie in the same plane as axis of blade Yes 60 NOS 23 NP25006063 INSPECTION MIRROR DIA- 2-2.5 INCH, INSPECTION MIRROR DIA- 2-2.5 INCH Shape of mirror Round Diameter of mirror 2-2.5 inch Should have telescopic rods Yes Should have double ball joints to allow 360 deg swivel of mirror Yes Extended length 12-15 inch Retracted length 8-10 inch Handle and mirror frame stainless steel Electrolytic-plated copper backing Yes Grip type Vinyl/PVC/Nylon Warranty 01 Year 40 NOS 24 NP25006064 PNEUMATIC SEALANT GUN, PNEUMATIC SEALANT GUN Material stainless steel Drive type Pneumatic Operation air Capacity 0.3 L approx Gun barrel length 250-300 mm Working pressure 50-15000 psi Size 10 inch approx Weight 1 kg approx Dispensing Nozle yes Spare dispensing nozzle yes 10 NOS 25 NP25006065 HAND RIVETER ( For Blind Rivets) 40 NOS 26 NP25002316 CIRCULAR SAW BLADE PART NO.34252, CIRCULAR SAW BLADE PART NO.34252 CIRCULAR SAW BLADE 0.5 X O.D. 64 MM X I.D. 13 MM 80 TEETH Remarks: 1. Vendors are required to give product catalogue, make and part no. of quoted items for technical acceptance. 2. Condition: Brand New 200 NOS 27 NP25004045 HSS HACKSAW BLADE FINE32TPI 0.8MM, HSS HACKSAW BLADE FINE 32 TPI SIZE : 300 X 12.5 X 0.8 MM (IN PACKING OF 100 BLADES) AS PER STANDARD IS: 2594 Remarks: Vendors are required to give product catalogue, make and part no. of quoted items for technical acceptance. 1000 NOS 28 NP25001892 HSS TWIST DRILL P/S 1.2MM, HSS TWIST DRILL PARALLEL SHANK SIZE: 1.2mm FLUTE LENGTH: 16 mm (Min.) OVER ALL LENGTH: 35 mm (Min.) Remarks: Vendors are required to give product catalogue, make and part no. of quoted items for technical acceptance. 100 NOS 29 NP25002645 DIFFUSED END MILL CUTTER 12MM, DIFFUSED END MILL CUTTER 12MM, Material :- M42 SIZE : 12MM X FL-35 X FLUTE-4 X OAL-74 X R-0 Material :- M42 Remarks: 1) .Vendors are required to give product catalogue, make and part no. of quoted items for tecnical acceptance. 2). Cutters should be capable for machining steel materials. 25 NOS 30 NP25002612 ENDMILL CUTTER HSS M35, 5%COB. P/S., ENDMILL CUTTER HSS M35, 5%COB. P/S. CENTER CUTTING, WHISTLE NOTCH, VACCUM HARDENED. R/H CUTTING, HELIX. SIZE : (DIA-12mm X CEL-95 X OAL-140 X TEETH-4 X RADIUS-4) Remarks: 1) .Vendors are required to give product catalogue, make and part no. of quoted items for tecnical acceptance. 2). Cutters should be capable for machining steel materials. 10 NOS 31 NP25005805 S.C. BALL NOSE END MILL DIA:05.00MM, SOLID CARBIDE BALL NOSE END MILL CUTTER DIA 5.0 MM FOLLOWING SPECIFICATIONS 1) CUTTER DIAMETER: 5.0 MM 2) SHANK DIAMETER: 6.0MM 3) FLUTE LENGTH: 25MM MINIMUM 4) OVERALL LENGTH: 75MM MINIMUM NOTE: 1. MATERIAL TEST CERTIFICATE & DIMENSIONAL INSPECTION REPORT FROM OEM IS REQUIRED. 2. OEM CERTIFICATE OF CONFORMANCE IS REQUIRED. 3. VENDOR SHOULD PROVIDE THE AUTHORIZATION CERTIFICATE FROM OEM (IN CASE OF DEALER AUTHORIZED FROM OEM TO QUOTE & SUPPLY THE ITEM) ALONG WITH QUOTE OTHERWISE QUOTE WILL NOT BE ACCEPTED. 4. EACH SUPPLIED ITEM SHOULD HAVE TRACEABILITY IN THE FORM OF OEM BATCH NO. ENGRAVED ON THE ITEM WITH OEM LOGO. ALSO BAR CODE/ QR CODE SHOULD BE AVAILABLE ON INDIVIDUAL PACK OF ITEM FOR TRACEABILITY. 5. COPY OF CATALOGUE SHOWING THE QUOTED ITEMS (WITH COMPLETE SPECIFICATIONS) MUST BE ATTACHED WITH THE QUOTE. 5 NOS 32 NP25004530 SLD.CRBD.BALL NOSE END MILL 8X16MM, SOLID CARBIDE BALL NOSE END MILL CUTTER DIA 8.0 MM FOLLOWING SPECIFICATIONS 1) CUTTER DIAMETER: 8.0 MM 2) SHANK DIAMETER: 8.0MM 3) FLUTE LENGTH: 40MM MINIMUM 4) OVERALL LENGTH: 100MM MINIMUM NOTE: 1. MATERIAL TEST CERTIFICATE & DIMENSIONAL INSPECTION REPORT FROM OEM IS REQUIRED. 2. OEM CERTIFICATE OF CONFORMANCE IS REQUIRED. 3. VENDOR SHOULD PROVIDE THE AUTHORIZATION CERTIFICATE FORM OEM (IN CASE OF DEALER AUTHORIZED FROM OEM TO QUOTE & SUPPLY THE ITEM) ALONG WITH QUOTE OTHERWISE QUOTE WILL NOT BE ACCEPTED. 4. EACH SUPPLIED ITEM SHOULD HAVE TRACEABILITY IN THE FORM OF OEM BATCH NO. ENGRAVED ON THE ITEM WITH OEM LOGO. ALSO BAR CODE/ QR CODE SHOULD BE AVAILABLE ON INDIVIDUAL PACK OF ITEM FOR TRACEABILITY. 5. COPY OF CATALOGUE SHOWING THE QUOTED ITEMS (WITH COMPLETE SPECIFICATIONS) MUST BE ATTACHED WITH THE QUOTE. 20 NOS 33 NP25004531 SLD.CRBD.BALL NOSE END MILL 10X20MM, SOLID CARBIDE BALL NOSE END MILL CUTTER DIA 10.0 MM FOLLOWING SPECIFICATIONS 1) CUTTER DIAMETER: 10.0 MM 2) SHANK DIAMETER: 10.0MM 3) FLUTE LENGTH: 50MM MINIMUM 4) OVERALL LENGTH: 100MM MINIMUM NOTE: 1. MATERIAL TEST CERTIFICATE & DIMENSIONAL INSPECTION REPORT FROM OEM IS REQUIRED. 2. OEM CERTIFICATE OF CONFORMANCE IS REQUIRED. 3. VENDOR SHOULD PROVIDE THE AUTHORIZATION CERTIFICATE FORM OEM (IN CASE OF DEALER AUTHORIZED FROM OEM TO QUOTE & SUPPLY THE ITEM) ALONG WITH QUOTE OTHERWISE QUOTE WILL NOT BE ACCEPTED.. 4. EACH SUPPLIED ITEM SHOULD HAVE TRACEABILITY IN THE FORM OF OEM BATCH NO. ENGRAVED ON THE ITEM WITH OEM LOGO. ALSO BAR CODE/ QR CODE SHOULD BE AVAILABLE ON INDIVIDUAL PACK OF ITEM FOR TRACEABILITY. 5. COPY OF CATALOGUE SHOWING THE QUOTED ITEMS (WITH COMPLETE SPECIFICATIONS) MUST BE ATTACHED WITH THE QUOTE. 10 NOS 34 NP25002434 PARTIAL PROFILE 60 deg., 16 ER, PARTIAL PROFILE 60 deg., 16 ER AG WITH FOLLOWING DETAILS Insert Size : 16 mm Application : External Hand Of Tool : Right Hand Type : Grounded Pitch : 0.5 to 3 mm Thread Standard : Partial Profile : 60 deg. TPI : 48- 8 Grade : P20 Or Equivalent 20 NOS 35 NP25002435 PARTIAL FORM 55 deg., 16 ER AG, PARTIAL FORM 55 deg., 16 ER AG WITH FOLLOWING DETAILS Insert Size : 16 mm Application : External Hand Of Tool : Right Hand Type : Grounded Pitch : 0.5 to 3 mm Thread Standard : Partial Profile 55 deg. TPI :48 - 8 Grade : P20 Or Equivalent 10 NOS 36 NP25002427 SNMG 120408 CVD COATED INSERT WITH, SNMG 120408 TIALN COATED INSERT WITH FOLLOWING DETAILS Application : Roughing Grade : P 20 or equivalent 10 NOS 37 NP25002430 CCMT 060204 WITH FOLLOWING DETAILS, CCMT 060204 WITH FOLLOWING DETAILS OR EQUIVALENT Insert Shape : Rhombic, angle 80 deg. Grade : P20 or equivalent 50 NOS 38 NP25004169 MINIFACE GROOVING BARKIT(1.0-2.5)MM, CARBIDE MINI FACE GROOVING BAR KIT WITH FOLLOWING DETAILS1. CARBIDE MINI FACE GROOVING BAR FOR GROOVE WIDTH- 1 MM, Tmax-2 TO 2.5 MM AND MINIMUM PLUNGING DIA- 6MM. *QTY-10 NOS. 2. CARBIDE MINI FACE GROOVING BAR FOR GROOVE WIDTH- 1.5 MM, Tmax-2.5 TO 3.5 MM AND MINIMUM PLUNGING DIA- 6MM. *QTY-10 NOS. 3. CARBIDE MINI FACE GROOVING BAR FOR GROOVE WIDTH- 2.0 MM, Tmax-3.5 TO 4.5 MM AND MINIMUM PLUNGING DIA- 6MM. *QTY-10 NOS. 4.CARBIDE MINI FACE GROOVING BAR FOR GROOVE WIDTH- 2.5 MM, Tmax-4.0 TO 5.5 MM AND MINIMUM PLUNGING DIA- 6MM. *QTY-10 NOS. 5. CYLINDRICAL SLEEVE TO CLAMP MINI CARBIDE FACE GROOVING BAR *QTY-06 NOS. 6. WITH SPARE SCREW QTY-20 NOS, AND SPARE KEY FOR SCREWS QTY-6 NOS. 2 KITS 39 NP25004172 6MM RH BORING BAR KIT, 6 MM CARBIDE BORING BAR KIT WITH FOLLOWING DETAILS1. 6 MM BORING BAR (RH TYPE) . *QTY- 6 NOS. 2. INSERT OF SUITABLE GRADE TO MACHINE STEEL AND ALUMINIUM ALLOYS TO SUIT ABOVE BORING BAR. *QTY-100 NOS. 3. WITH SPARE SCREW *QTY-20 NOS & SPARE KEY FOR SCREWS-*QTY- 06 NOS 2 KITS 40 NP25005806 S.C. BALL NOSE END MILL DIA:06.00MM, SOLID CARBIDE BALL NOSE END MILL CUTTER DIA 6.0 MM FOLLOWING SPECIFICATIONS 1) CUTTER DIAMETER: 6.0 MM 2) SHANK DIAMETER: 6.0MM 3) FLUTE LENGTH: 30MM MINIMUM 4) OVERALL LENGTH: 75MM MINIMUM NOTE: 1. MATERIAL TEST CERTIFICATE & DIMENSIONAL INSPECTION REPORT FROM OEM IS REQUIRED. 2. OEM CERTIFICATE OF CONFORMANCE IS REQUIRED. 3. VENDOR SHOULD PROVIDE THE AUTHORIZATION CERTIFICATE FORM OEM (IN CASE OF DEALER AUTHORIZED FROM OEM TO QUOTE & SUPPLY THE ITEM) ALONG WITH QUOTE OTHERWISE QUOTE WILL NOT BE ACCEPTED. 4. EACH SUPPLIED ITEM SHOULD HAVE TRACEABILITY IN THE FORM OF OEM BATCH NO. ENGRAVED ON THE ITEM WITH OEM LOGO. ALSO BAR CODE/ QR CODE SHOULD BE AVAILABLE ON INDIVIDUAL PACK OF ITEM FOR TRACEABILITY. 5. COPY OF CATALOGUE SHOWING THE QUOTED ITEMS (WITH COMPLETE SPECIFICATIONS) MUST BE ATTACHED WITH THE QUOTE. Total Quantity : 4385
