Ebid For Drip Automation And Sprinkler-Related Items, Plastic Water Tanks Etc., Jaipur-Rajasthan

Ebid For Drip Automation And Sprinkler-Related Items, Plastic Water Tanks Etc.-L. Complete Set of Automation irrigation unit:- Specification of the machine with following facility:- a. Time based and Volume irrigation facility with loaded software programmable as per crop need. b. Facility for monitoring, record keeping and data analysis for water budgeting. c. Monitoring of pH and EC of irrigation water and pH correction facility. d. One dosing channel with rotameter having leum flow per hr. e. Controller having 16 outputs and Expendable up to 80 output. f. Should Support Multi-Main line with No limit for irrigation and Fertigation program. g. Filter Flushing (Manual and Auto). h. Automatic Pump ON and OFF. i. Emergency alarm for low or high pressure, EC, pH, flow, etc. . Fertigation system and PC Communicating unit (controller can be connected with PC). j k. Relay for connection fertigation machine and pump, Power line protector 230v, 1. Water meter electronic, with all Accessories of Automation unit like PVC, UPVC, Electric Cable etc. m. Body of the machine should be SS 2. Gravel Filter Back flushing Valve 2 size poly propelene made 3. Pressure Sustain Valve 2 size MS 4. Stabilizer 1KVA-1 phase (input 150 to 300V & output of 230 volt) 5. Single Phase preventer (Havels) 6. 1Disc Filter 130 Micron for (fertilizer Tank) 7. Pump Starter with auto star delta ICHP 8. Plastic fertilizer tank of 500 Ltr capacity 9. Filter flushing unit Manual and Auto (25cum) 10. PVC pipe-32mm (6 mtr) and pvc ball valve- (pvc fittigs for fertilizer tanks) 11. 2 Solenoid valves with ON/OFF Manual Bleed (with 24VAC input) 12. Conduite pipe 32 to 50 mm as per requirement 13. Electrical cables 2.5 to 3 core cable for field controllers as per requirement 14. Electrical cables 1 & 1.5 core cable for field valve 15. Board for Panel and Equipment Head unit 16. 2Disc Filter (IS 12785:1994) 17. Gravel Filter Gl/PP2 (IS 14606: 1998) 18. Air release valve 1 19. Pressure Gauge SS body 2 Dia 20. Fertiliser Injector 2 (IS 14483:1997) 21. Butter Fly Valve 2 MS 22. Non return Valve 2 (Polypropelene) 23. PP Ball Valve 2 (By pass) (Polypropelene) 24. Pressure Relief Valve 2 MS Hydoulic 25. Header assembly GI/PP 2 Field Drip irrigation components 26. Main line-PVC 75/4kg/cm2 (IS 4985:2000) 27. Flow control Valve 2 (Polypropelene) 28. Sub main Flush Valve 50 mm PVC 29. Pressure Compensated (PC) Drip line 16mm, 2LPH, 0.30 M dripper distance having Anti- Siphon Mechanism (IS 13488: 1992/2008) of white colour 30. Pressure Compensated (PC) Drip line 16mm, LLPH, 0.30 M dripper distance having Anti- Siphon Mechanism (IS 13488: 1992/2008) of Black colour 31. Start Connector16 mm 32. Rubber grommet 16 mm 33. End Plug 16mm 34. Lateral coke 16 mm 35. Nipple 16 mm Irrigation Pump and fitting 36. Electric Pump 5 HP Mono block with control Panel 37. Accessories for fitting of irrigation pump Installation 38. Fittings of automation unit at site 39. Fitting of irrigation pump 40. Trench digging and back filling 41. Installation charge for drip irrigation system (With manual valve) 42. Installation charge of connecting automation unit in field 43. Fixation of Filter unit B. Plastic Water Tank 1. Plastic water tank of 5000 litres capacity having ISI or its equivalent authority mark, white/black in colour, fitted with 2 plastic Valve near to bottom with Iron stands (red oxide + green clour) of 2 metre height of good strength to bear weight of 5000 litres water filled plastic tanks with installation. 2. Plastic water tank 1000 litre, ISI mark, white/ black in colour 3. Plastic water tank 500 litre, ISI mark, white/black in colour C. i Sprinkler Set as mentioned below HDPE Sprinkler pipe 63 mm x 3.2 kg/cm2, 6 m length, ISI Mark ii HDPE Sprinkler pipe 63 mm x 3.2 kg/cm2, 3 m length, ISI Mark iii HDPE Sprinkler pipe connecting nipple, 63 mm iv HDPE Sprinkler pipe 63 mm sprinkler band V HDPE Sprinkler pipe 63 mm sprinkler Tee we HDPE Sprinkler pipe 63 mm sprinkler end cap vii Sprinkler nozzle gun metal ix HDPE Sprinkler pipe 63 mm foot button complete, ISI Mark GI riser pipe, ISI, ¼ inch X HDPE delivery pipe 63 mm x PN-6, 200 m length x 2 pieces, both end fitted with connecting system, ISI Mark

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	08-11-2024		Corrigendum upload	25-11-2024
2	25-11-2024		Corrigendum attached	29-11-2024

Refer document

Refer document

INR 25 Lakhs /-