Tender For Increasing Capacity Of Transformer work - 1 Work No. 01 (Siswa)Shifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station Siswa,Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 55 km) 2 11 KV ‘XLPE’ power cable. 3 33 KV ‘VCB’ complete with all structure. 4 33 KV. C.T. 5 33 KV C.T.Structure 6 33 KV Fuse Set 7 33 KV Fuse Set Structure 8 33 Bus Isolator 9 33 KV Post Insulator 10 Structure for Above 11 33 KV Double T/F Control pannel 12 33 KV lightening arrester 13 33 KV LA Structure. 14 33 Bus Isolator Structure. 15 33 KV. P.T. 16 33 KV P.T.Structure 17 11 KV Incoming, Switch Gear ‘VCB’ CTR-600/ 300/5A, 350MVA 18 11 KV Outgoing, Switch Gear ‘VCB’ CTR-200/ 100/5A, 350MVA 19 Bus coupler 350MVA 20 Earthing of S/sOutdoor equipments (earthmat) 21 Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing. 22 Earthing of 5 MVA power transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type) 23 Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type 24 Providing & Making Connection of 24 Volt Battery with inverter and cabinet 25 Providing P.G. clamp for Dog conductor. 26 Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing) 27 G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting. 28 providing , erection and Grouting of requiredchannel/angle forcable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings. 29 Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection. 30 Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable. 31 Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work. 32 GI PipeEarthing Complete forCable jointing Kit with materials 33 Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly. 34 Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T. 35 Testing of 11 KV switchgear panel in all respect. 36 Providing & Laying ofcontrol cable in trench from switchyard to control room 33 KV Control panel and making connection complete. 37 Size 2 x 2.5 mm2 38 Size 4 x 2.5 mm2 39 Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate 40 Separate earthing of Sub-stationIndoor Equipment complete including cost of All materials. 41 Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing. 42 Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing. 43 Erection, grouting and mounting of PT structure. fitting of “PT” on erected structure with complete earthing. 44 Erection grouting and earthing of following structure. 45 33 KV Bus Isolator structure 46 33 KV fuse set structure 47 33 KV Post insulator structure 48 33 KV L.A. structure 49 Mounting and fitting of equipment on erected structures. 50 33 KV Bus – Isolator 400 Amp. 51 33 KV Post Insulator 52 33 KV LA 53 33 KV fuse set ( Copper strip as required size for 33 KV fuse set) 54 Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip. 55 Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp) 56 Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials. 57 Dismantling of existing pale fencing and resetting after completion of transformer work. 58 Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint) 59 Providing Rubber Mat 2m x1mx12mm thick Black/Red Colour 60 Work No. 02 (Brijmanganj)Shifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station Brijamanganj,Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 55 km) 61 11 KV ‘XLPE’ power cable. 62 33 KV ‘VCB’ complete with all structure. 63 33 KV. C.T. 64 33 KV C.T.Structure 65 33 KV Fuse Set 66 33 KV Fuse Set Structure 67 33 Bus Isolator 68 33 KV Post Insulator 69 Structure for 33 KV Post Insulator 70 33 KV Double T/F Control pannel 71 33 KV lightening arrester 72 33 KV LA Structure. 73 33 Bus Isolator Structure. 74 33 KV. P.T. 75 33 KV P.T.Structure 76 11 KV Incoming, Switch Gear ‘VCB’ CTR-600/ 300/5A, 350MVA 77 11 KV Outgoing, Switch Gear ‘VCB’ CTR-200/ 100/5A, 350MVA 78 Bus coupler 350MVA 79 Earthing of S/sOutdoor equipments (earthmat) 80 Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing. 81 Earthing of 5 MVA power transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type) 82 Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type 83 Providing & Making Connection of 24 Volt Battery with inverter and cabinet 84 Providing P.G. clamp for Dog conductor. 85 Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing) 86 G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting. 87 providing , erection and Grouting of requiredchannel/angle forcable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings. 88 Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection. 89 Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable. 90 Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work. 91 GI PipeEarthing Complete forCable jointing Kit with materials 92 Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly. 93 Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T. 94 Testing of 11 KV switchgear panel in all respect. 95 Providing & Laying ofcontrol cable in Trench from switchyard to control room 33 KV Control panel and making connection complete. 96 Size 2 x 2.5 mm2 97 Size 4 x 2.5 mm2 98 Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate 99 Separate earthing of Sub-stationIndoor Equipment complete including cost of All materials. 100 Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing. 101 Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing. 102 Erection, grouting and mounting of PT structure. fitting of “PT” on erected structure with complete earthing. 103 Erection grouting and earthing of following structure. 104 33 KV Bus Isolator structure 105 33 KV fuse set structure 106 33 KV Post insulator structure 107 33 KV L.A. structure 108 Mounting and fitting of equipment on erected structures. 109 33 KV Post Insulator 110 33 KV Bus – Isolator 400 Amp. 111 33 KV LA 112 33 KV fuse set ( Copper strip as required size for 33 KV fuse set) 113 Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip. 114 Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp) 115 Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials. 116 Dismantling of existing pale fencing and resetting after completion of transformer work. 117 Providing Rubber Mat 2m x1mx12mm thick Black/Red Colour 118 Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint) 119 Work No. 03 (Bhitauli)PART - A- MATERIAL PROVIDED BY CONTRACTOR 120 11 KV C/J Kit 3X185 mm² XLPE Outdoor 121 Number Plate with clamp 122 Danger Board with Clamp (40x6mm) 123 GI Barbed wire 124 Bolts, Nuts, & Washers 125 X-arm clamp with nut bolt for PCC Pole 8.5 mtr with nut bolt by 50x6 mm MSflat Iron make 126 X-arm clamp with nut bolt for ST Pole 11 mtr. with nut bolt by 50x6 mm MSflat Iron make 127 Stay set with Clamp for PCC Pole 8.5 mtrwith Nut and Bolt by 50x6 mm MS Flat Iron make. 128 Stay Rod 20x1800 mm 129 Stay wire 7/8 SWG 130 MS Earthing Rod 20x2500 mm² 131 P.G. Clamp for Weasel Conductor 132 ‘E’ Bracket for 11 KV 133 T-off Channel holding clamp (50x6mm) with Bolts and Nuts 134 11 KV Guarding angle Clamp with nut bolt for ST Pole 11mtr. with Nut and Bolt by 50x6 mm MS Flat Iron make. 135 F-bracke with nut bolt for PCC Pole 8.5 mtr with nut bolt by 50x6 mm MSflat Iron make 136 F-bracke with nut bolt for ST Pole 11 mtr with nut bolt by 50x6 mm MSflat Iron make 137 Rubber Mat 2m x1mx12mm thick Black/Red Colour 138 Hand Gloves (Suitable for 33 KV) 139 11 KV Top Channel Clamp with nut Bolt. 140 11 KV Bracing Angle Clamp with nut Bolt. 141 Alluminium Paint 142 Red Oxide Paint 143 Part B WorkShifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station Bhitauli,Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 55 km) 144 11 KV ‘XLPE’ power cable. 145 33 KV ‘VCB’ complete with all structure. 146 33 KV. C.T. 147 33 KV C.T.Structure 148 33 KV Fuse Set 149 33 KV Fuse Set Structure 150 33 Bus Isolator 151 33 KV Post Insulator 152 Structure for Above 153 33 KV Single T/F Control pannel 154 33 KV lightening arrester 155 33 KV LA Structure. 156 33 Bus Isolator Structure. 157 33 KV. P.T. 158 33 KV P.T.Structure 159 11 KV Incoming, Switch Gear ‘VCB’ CTR-600/ 300/5A, 350MVA 160 11 KV Outgoing, Switch Gear ‘VCB’ CTR-200/ 100/5A, 350MVA 161 Bus coupler 350MVA 162 P.C.C. Pole 8.5 Mtr. Long 163 S.T. Pole 11 Mtr. Long 164 ACSR weasel Conductor 165 11 KV ‘XLPE’ Cable 3x185mm². 166 11 KV Polymer Pin Insulator 167 11 KV Polymer Disc Insulator T&C Type 168 Disc fitting T&C Type for Weasel 169 11 KV. Top channel ( 100x50mmX2240 mm) 170 11 KV ‘V’ Type Cross Arm. (65x65x6mm) 171 M.S. Angle Iron 65x65x6mm bracing with clamps (50x6mm) 172 11 KV T-off Channel (125x65x1300mm) 173 11 KV Guarding Angle (65x65x6mm) 174 GI Wire 5 mm 175 Earthing of S/sOutdoor equipments (earthmat) 176 Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing. 177 Earthing of 5 MVA power transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type) 178 Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type 179 Providing & Making Connection of 24 Volt Battery with inverter and cabinet 180 Providing P.G. clamp for Dog conductor. 181 Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing) 182 G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting. 183 providing , erection and Grouting of requiredchannel/angle forcable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings. 184 Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection. 185 Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable. 186 GI PipeEarthing Complete forCable jointing Kit with materials 187 Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly. 188 Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T. 189 Testing of 11 KV switchgear panel in all respect. 190 Providing & Laying ofcontrol cable in trench from switchyard to control room 33 KV Control panel and making connection complete. 191 Size 2 x 2.5 mm2 192 Size 4 x 2.5 mm2 193 Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate 194 Separate earthing of Sub-stationIndoor Equipment complete including cost of All materials. 195 Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing. 196 Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing. 197 Erection, grouting and mounting of PT structure. fitting of “PT” on erected structure with complete earthing. 198 Erection grouting and earthing of following structure. 199 33 KV Bus Isolator structure 200 33 KV fuse set structure 201 33 KV Post insulator structure 202 33 KV L.A. structure 203 Mounting and fitting of equipment on erected structures. 204 33 KV fuse set ( Copper strip as required size for 33 KV fuse set) 205 33 KV Bus – Isolator 400 Amp. 206 33 KV Post Insulator 207 33 KV LA 208 Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip. 209 Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp) 210 Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials. 211 Dismantling of existing pale fencing and resetting after completion of transformer work. 212 Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint) 213 Erection of single pole 8.5 Mtr.Long PCC pole & mounting of all its accessories etc.complete work. 214 Erection of single pole on 11 Mtr.Long S.T. pole & mounting of all its accessories etc.complete work. 215 Erection of Double pole 8.5 Mtr.Long PCC pole & mounting of all its accessories etc.complete work. 216 Stringing of ACSR Weasel conductor inclouding laying & mounting of conductor,sagging & binding properly. 217 Making of Sectional T-offPole with all fitting complete work. 218 Extra work for separation of Circuit i.e. Shiffiting the Existing Line from Vertical to Horizontal (By opening the winding from insulator and re-sagging the conductor from Vertical to Horizontal 219 Cutting of tree branches/bamoos in the path of 11 KV line to get adequate clearance from conductor. 220 Painting of S.T.Pole with red oxide and alluminium paint(Two coat) 221 Groutings of stays complete in ratio 1:4:8 (cement:sand:brickballast). 222 Earthing of support complete. 223 Guarding of Road /11 KV /L.T.Line crossing.
