Annual Rate Contract For Electric Items Under Jurisdiction Of Pwd Elect Division Ii Jodhpur (Half Yearly Basis)-S&F following sizes (dia.) of ISI marked virgin material MMS (IS:9537 P-III) PVC conduit along with ISI marked (IS-3419-1988) accessories qiah own OEM CM/L No as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 20 25mm 32mm P & F 1.2mm thick MS. Recessed fan box, hexagonal/round of size 130 man dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side complete with minimum weight of 750 gm All as per pre approved by Engineer in charge. For additional technical parameters of product/work refer Annexure. A attached with this BSR Providing & making heat shrinkable type indoor/outdoor/straight through terminations/ joint kit suitable for 11 KV/33 KV (Earthed) cable with required components, prepration of cable ends. Type test report should be as per IS13573:2011 which covered all sequence for table 2 for termination kit and table 3 for streight through joint inclusive thermal & dynamic short circut test, humidity test, soil fog test. Cross linking shall be done out side factory with E- beam peroxide technology. Extrusion process shall be in house OEM within same vicinity, including testing etc. as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR 11 KV End Termination Kit Indoor type 3 core 120/150/185 Sq mm 11 KV End Termination Kit Outdoor type 3 core 120/150/185 Sq.mm Providing experienced and Highly skilled/skilled/ semi- skilled/Un Skilled labour for electric repair maintenance operation of Air conditioning/Air fighting/Lift/DG set/CCTV/EPABX cooling Fre any other electromechanical systems as per requirement (one shift of 8 His per day for 26 Working Days in a mouth) Highly skilled Labour skilled Labour Semi skilled labour Un skilled labour Providing & Fring of Recessed/surface mounting heavy duty horizontal type Double Door (Metal/Glazed)Distribution board with Metal end box made out from Galvanized steel CRCA sheet not less then 1.2 mm thick conforming to IS- 8623-1 & 3/ IEC 61439-1 & 3, powder painted complete with reversible door (for double door DB only )100 amp insulated copper bus bar/shorting link, copper neutral link, copper earth link, color coded interconnecting wire set of suitable rating and din bar, masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL/CPRI/ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product/work refer Annexure A attached with this BSR Metal door (single phase) IK-09 and IP-43 with Metal end box 8 Way (8+2) 12 Way (12-2) Metal door (Three phase) IK-09 and IF-43 with Metal el 4 Wav 20 21 22 23 24 25 6 Way 8 Way 12 Way Add Extra for Laying of one number PVC insulated and PVC sheathed SLPE power cable of 1.1 KV mada direct ground inchiding ancavation of manch of size 75 cm (Depth) 35 cm(Width) with procedure in per following ponts (a) Make a river sand bed of height 125 mm along the wench. (b) Lay the cablu in the midilla of the trench, (c) Provide river sand bed of height 125 mm on top of the cable, (d) Lay the protective Couman bant by FPS. Bricks of Clan designation 75/ Sanil stone slabo of 50 mm thickness anal 225 nam vide just above the sand bed vertically across the cable (Approx. 9 no. Bricks par 9 encavated soil leaving 300 Oman from the Ground level (Lay the Cable woning tape mal agam back-fill the remwing portion of the trench upto the ground level and compacting the earth Add Entra in Item no 11.3 if Excavation done in Hard Rock CC road/TAR Road and making Good the same P&F ISI maked (15:3854) 6 mup fush type non modular switch with CM/L no, printed and made out from mductriall made Polycarbonate or or fire resistant ABS material inchading cutting hole in tile and making connection tacting etc a reqused All as per pae approved by Engineer in charge. For additional technical pesameters of products work refer Annenure A attached with the BSR Promading & Foung of 6 Combined fhch type modular socket anil ontch set as per PWD specification for electrical Works made out from industrial grade Polvesrbonate or fas sesistant ABS material including cutting heila in tila and making correction testing ate as required. All as per pre approved hy Engineer in charge For additional rechaucal parameters of products work refer Anneme A attached with this BSR Provsiling & Frong of 151 marked (15:371) 6 ap marice type 3 pin exiling 1000 with CM/L, no pricted and made out fum audustrial grade Polycarbonate or fiereta ABS material brass terminal & captive snows melade kic as per pre approved by nection testing as requred All as Engineer charge For aditional technical parameters of products work refe Annonce A attached with thi BSR of 151 masked (15:1258) Botteg Provning & Fang of hokder with CM, no printed sul made oot from mdustrial grade Polycarbonate or fire resistant ABS material brass teruminal & captive screwsincluding making commaction required testing etc, as reqia as per pre approved by Engineer All as per thacge For additional technical parameters of products work 16 Ашenne A sttached with the BSR vang & Frag of ISI mushed (35 1295) 6 Proved undowakable 3 pin pong top having lang indicator with CML no, printed and made out from industrial made Polycarbonaten or fire resistant ABS material, brass huminal anchading making comed All as per pre approved by Engineer in charge For additional technical parameters of products/ wock, refer Annesture A attached with thes Providing de Fiding of 15 11037-1984 marked non modular sockat sine fach type 120 watt rotay min 5 step fa regulator with CML no printed and made our som industriall grade Polycarbonate or fire reststand ABS material imchuling making commechon testing etc. regured. All as per pe approved by Enginear in charge. For additional paramanas of products/ work rau Annas A attached wath the BSR and drawing FR PVC immisted & mcheathe copper conductor as per PWD specification for electrical Works with 251 marked (15 694) and as per 15 8130 2013 of 11 LV grade Wine should be made from 99.90% panty stranding to IS 5130/IEC 60228 for lower watt loss oxygen firee e for len cluances of oxidization izumilation PVC type A/CD, flame retardant as per IS 10810- 53, better amperage ratang as per 15:3961 part 5, in stung rice or sewed PVC MS condut eating capping waking with Copper Lugs of stabia z Fermules, testing etc as required. OEM Mnot have its own house NABL lab setup for all testing fheilities for wires. For additional technical parameter of product work r An A attached with thhas BSR 1 x 15squ 1 x 25 sqmmm 1 x 4.0 sq.mm 1 x 6.0 men P/Laying ISI marked P.V.C. immlated subumrsible cable confirming to (15:694) and as per par 1 IS $130 2013 of i LIV grade Wus should be made from 99.90% purity copper. stranding in acc to 15:8130 TEC 60228 for lower watt loss oxygen free for less chances of onidination, innulation PVC type A/C/D flame retardant as per 15 10810-53, better amperage rati rating as per 15:3961 part 5 existing pipe/open trench / Cable tray on wurfisce including making connection etc as required. For additional technical parameters of product/work refies Armempe A attached with the BSR 1.5 Sqm 3 cose fat Round 2.5 Sq mm 3 cote flat Round SF following sizes (din) of ISI marked (15:9537 PIⅡ hind steel conduit condut with wall thickness according to 15 Specified along with 151 maked (15-14768 Р.П 1003) acceccories in recessed wing saddies, clamps, foteners, pve bushes, check umur, as required inchading cutting him in the wall and aking good the samem requsel. For additional n of product work refer Armeroue A tached with this BSR 15 of light pora fin pointshau f point call اللسا FR PVC math 15 untheathed Bels copper conductor 1.1 kV grade anul 15 omanal FR PVC alated uhastid felle sarth conductor 1.1 AV grade (IS:694) ISI maked MD/MS (15.9537 P III) vugan material PVC ISI munked (15:5419-1958) 200ries, round tiles, 1.2 mm thick Hot Dipped Galvanined. Modular Box with earth nemal 10A Modular winch Modular fos plane with grid plate, 3 pin ceiling rooe Holder 3 way connector, ews, making connections, testing etc. as required. For pecification of copper Conductor, Phenolic Laminated sheets & Electrical Wiring accessories refer Chapter E-04 E-05 & E-07 For sódimonal technical parameters of product/work refies Armemne A attached with the BSR Shest poest (up to 3 mát) Mediam point (up to 6) Long post (up to 10 mtr) Wiring of 3/5 pin 6 amp. Light plug point with 1.5 og sine FR PVC insulated unchenthed flemble copper conductor 11 kV grade and 1.5 qum nomenal size FR PVC insulated umheathed flexible copper earth conductor 1.1 V grade(15:694) in recessed 151 naufred MMS (IS-9537 P III PVC conduit & its 151 maried (15:3419- 1988)accessories, Hot Dipped Gahmed Modular box of 1.2 mm thick earth termal 10 A condal with 35 A modular socket, Modular face plate with grid plate senews, making comictum, tading ate a swored. Fos specification of coppe Conductor, Phetoc Lammorted shosts & Electrical Waing across refle Chuptse E-04 05-07 Fos For addimonal technical parameters oduct/work sur Asmanes A attached with the BSR On bomd Providing & Frung of IP20 SMD Mid Power LED batten type antegrated light fits made from Punder coated traded shamn honung with in built driver System 110 loWet protection of 2.5 KV with Short & Open ciresat protacion THD 10% PF-0.95, CRI 60 twof 50000 В Ноurs wah, 70% of anal Ltلس CCT 3000°K 4000K/5700K 6000K/6500K (As per ANSI Bin). Maна рома comsumptun should not more than the specified ratug and Future shall be of BIS standard and trade mak certificate ( T.C.). Manufactures Word Mank Name Engraved Embossing Screen printing on housing. OEM unut lave its min home NABL lab setup for all testing facilities for LED futures (L179 & 1080) сетивото Repost from OEM shall be mkmitted. All as per gee approved by Engineer change. For additional technical zoumeters of products work, refer Annenne A attached with this BSR 1170mm(-10%) LED batteo with min kuumen outpat 2200 Providing of 240/415 V AC MCB DICB with posanvs molation of 10 A bexaking capacity (B CD ripping characteristic as per type of load and site requer) 4KV mpulse withstand voltags, ISI maked IS 8828(1996) conforming to IEC 60598-1 2002, IEC 60947.2, low watt losses, trip free mechanism, mergy limiting o of class 3 IEC, minime phase tummination capacity of 35sq 20 per conductor line load reversibiüry, IP 20 contact protection md fered in existing distribution board/sheets, minimum electrical operation 30,000 upto 20 Anting ml 10,000 pes 63 A 1000 for testing OEM shall all have subunit NABL CPRI ERDA accedated lab type best repochs & All in pe pre approved by Engineer in chouge. For additional technical pacanatees of product/work A with this BSR 53 Single pole MCB (With B/C curve tripping Characteristics) 54 6 A to 32 A rating 55 Double pole MCB(With B/C curve tripping Characteristics) 56 6 A to 32 A rating 57 Four pole MCB (With B/C curve tripping Characteristics) 58 50/63 A rating 59 100 A rating
