Maintenance Repair Of Hss Dragger - Providing/Laying Stone soling Nallah hand packed on level in foundation trenches including carriages of Stones.INC CARRIAGE 15 KM Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Providind Laying in postion of M 7.5 Cement concert 1:4:8 (1 cement: 4 coarse sand: 8 graded ). providing laying 22mm thick pre cast cement concrete tiles chequered in mix 1;4 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. Providing and fixing aluminum work for doors, windows, ventilators and partitions (frame) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Powder coated aluminum (minimum thickness of powder coated 50 microns). Incl. shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, 4mm Thick ACP Sheets & all other accessories (Handles, Tower-Bolt, Al-Drop etc.) - (14-Guage Material) P/A 12 mm thick cement plaster 1:4 (1cement:6 fine sand) P/L cement concrete flooring (1:2:4) mix etc complete 50 mm thick with 20mm nominal size stone aggregate Providing and fixing 1st quality ceramic glazed tiles of size 600x600mm conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete Providing and laying vitrified floor tiles in sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Carraige of Fine Aggregate from Source to Site. 30 Km Carraige of Coarse Aggregate from Source to Site. 20 Km Sanitary Fittings and Disposal System:Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete. (PPR Elbow, Union, Tee, Socket, etc 20mm) P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete. (Tank nipples 20mm dia) Providing and fixing of PPR gate value with C.I wheel of approved quality (ISI mark). (25mm) P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Teess, Elbows etc.) jointing/testing complete (100mm) P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Teess, Elbows etc.) jointing/testing complete (75mm) P/F PVC fittings of standard quality type Floor Trap (100mm) P/F PVC fittings of standard quality type Tee (100mm) P/F PVC fittings of standard quality type Reducer (100mm to 75mm) Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 19.26.1 With common burnt clay (non modular) bricks of class designation 7.5 P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc B type P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest) P/F CP Brass Bib Cock 15mm P/F CP Floor Grating (100mm) P/F CP Angle valve 15mm Nominal Bore concealed type Jaquar or Equivalent. P/F PVC water storage tank Tripple layer Sintex or equvalent make Add provision for cost of photographs & Citizen Information Board.
