Tender For To Provide New Connections And Other Work In Full Deposit Scheme In Edd Nagina(Running), dhampur-Uttar Pradesh

To Provide New Connections And Other Work In Full Deposit Scheme In Edd Nagina(Running)- 1 Safe carriage of following material from ESC Bijnor/ Dhampurwith loading & unloading at both ends respectively. (forItems in Sr. no. 1.01 to 1.13) 2 09/11/13 Mtr. Long ST Poles 3 8.5 Mtr. PCC Pole 4 33KV/11 KV XLPE Cable 3x70/120mm2/185/300/400 5 11/0.410 KVA Transformers 6 11/0.425 KVA Transformers 7 11/0.463 KVA Transformers 8 11/0.4100 KVA Transformers 9 ACSR Weasel/Rabbit/Dog Conductor 10 33KV/11 KVCT/PT unit with all its related accessories. 11 33KV/11 KV Pilfer resistant metering Cubical. 12 L.T. ABC Cable off Different Sizes. 13 L.T. Alu. Cable Size 3.5x70mm. 14 11 KV line material Such as Cross-Arms, Pin Insulators, Guarding Angles, G.I. Wire, Disc Insulators, Stay Rod, Stay Wire & Cable Jointing Kits etc 15 Digging of pits, Erection of 13/11 Mtr. Long ST/PCC Pole including fixing of all required accessories by providing M.S. Clamps Nut & Bolts etc. ( as per respo norms) 16 Digging of pits, Erection of 13/11 Mtr. Long ST Double poles including fixing of all required accessories by providing M.S. Clamps Nut & Bolts etc. ( as per respo norms) 17 Digging of pits, Erection of 13/11 Mtr. Long Tri pole including fixing of all required accessories by providing M.S. Clamps Nut & Bolts etc.( as per respo norms) 18 Digging of pits, Erection of 13/11 Mtr. Long ST Single Section Pole including fixing of all required accessories by providing M.S. Clamps Nut & Bolts etc.( as per respo norms) 19 Fabrication and fixing of T/F Angle seat on Double pole for Mounting and safe placement ofT/F on Double pole by providing M.S. Clamps Nut & Bolts etc. ( as per respo norms) 20 Grounding of earth rods for making earthing of poles and T/F by providingM.S clamps, nut and Bolts etc. ( as per respo norms) 21 Grouting of Stay rods (20x1800mm.) including all works of excavation, cement concrete in size of (0.60x0.60x0.30) M in the atio of 1:4:6 (cement, sand and 40mm. brick ballast) including back filling of soil and proper ramming etc. ( as per respo norms) 22 Fixing, tightening and nozelling of stay wire with stay rod and stay insulators, with pole of required tension by providing stay clamps, nuts, bolts etc. ( as per respo norms) 23 Fabrication and fixing of guarding angles on poles by M.S clamps, nut & bolts, laying and sagging of G.I wire, Fixing and binding of cross lesses for making jaal under 11KV line. ( as per respo norms) 24 Fabrication of M.S channel/Angle/33 KV/11 KV Cross Arm including its cutting, Drilling making holes etc. 25 Fabrication of M.S. Channel/angle and mounting of 33 KV/ 11 KV CT/PT unit on Double pole and fixing & fitting of all related accessories by providing m.S. clamps, Nuts & Bolts for Double metering, etc. ( as per respo norms) 26 Installation of 33 KV/11 KV pilfer resistant metering cubical in meter room Including fixing of cable Boxes and Making Connections Complete Work, etc.( as per respo norms) 27 Laying and sagging of ACSR weasel/Rabbit/Dog conductor in 33KV/11KV line including its binding on Insulators ets complete work. ( as per respo norms) 28 Filling and fixing of 33KV/11KV cable jointing kits after laying of XLPE cable. ( as per respo norms) 29 Laying, jointing & binding of 33 KV/ 11 KV XLPE cable on pole and other end in meter room.( as per respo norms) 30 Grouting of ST pole and making plinth all around the pole with cement, sand and stone Ballast in ratio 1:4:6 ( as per respo norms) 31 Fabrication and fixing of T-off channels on poles by providing M.S clamps, Nut and Bolts.( as per respo norms) 32 Mounting and fixing of 10 KVA transformers on Single pole including making proper connections.( as per respo norms) 33 Mounting and fixing of 25 KVA transformers on double pole including making proper connections.( as per respo norms) 34 Mounting and fixing of 63 KVA transformers on double pole including making proper connections.( as per respo norms) 35 Mounting and fixing of 100 KVA transformers on double pole including making proper connections.( as per respo norms) 36 Providing & fixing of danger board at each location as per specification of the drawing.( as per respo norms) 37 Laying and mounting of LT PVC Cable 3.5x70mm2 on Poles .( as per respo norms) 38 Laying, lifting and sagging of ABC Cable on poles by fixing all type of clamps, its binding on shackle insulators etc. Complete work.( as per respo norms) 39 Fixing of Distribution Boxes on ST Poles by providing MS Clamps including making connections of consumer’s cable connections by providing locks on Distribution Boxes.( as per respo norms) 40 Trimming of Tree branches crossing in the route of different spans of 33 KV/11KV/LT Lines. ( as per respo norms) 41 Providing Wrapping of barbed wire on SP-55 Poles 1 Kg. per Pole.( as per respo norms) 42 Providing and fixing of Number Plate with clamp, nut and bolts etc. ( as per respo norms) 43 Back Cartage of Old used Damaged 10/25/63/100 T/F from work Site to Bijnor/Dhampur Store including its loading and unloading.( as per respo norms) 44 Back Cartage of Old used Damaged CT/PT unit and 33KV/11 KV Pilfer Resistant Unit from work Site to Bijnor/ Dhampur Store including its loading and unloading.( as per respo norms)

INR 1180 /-

INR 10000.0 /-

INR 10 Lakhs /-