Bids Are Invited For 1 FLEX.HOSE-HP SERVO MOTOR RETURN OIL LINE16025008150_1_1000067702_UOM_EA FLEXIBLE HOSE FOR HP SERVOMOTOR RETURN OILLINE OF 18.5 MW TG( EG 800-2) Specification:- SS wire braided flexible corrugated hoses with flange swivel connection with stub ends at both ends, Size:-80NB/ 3,Length =1000mm, Flange:-As per ANSI B16.5 class-150 SORF,PCD=152mm X 4 bolts. MOC:- AISI 321 ( Hose braiding & Coorugated hose), AISI 304 (Flanges & end fittings). As Per NALCO Drawing No:-NALCO/MECH/SGP/1663.Conforming to BS 6501 Part-1 1991.Application:- For Turbogenerator control oil hoses, Max Working Pressure-12.0 KG/CM2, Max Workingtemp=100Deg C. Medium:-Servoprime 46T lub oil. 8 EA 2 FLEX.HOSE-LP SERVO MOTOR RETURN OIL LINE16025008390_2_1000067702_UOM_EA FLEXIBLE HOSE FOR LP SERVOMOTOR RETURN OIL LINE OF 18.5 MW( EG 800-2) TG. Specification:- SS wire braided flexible corrugated hoses with flange swivel connection with stub end at both ends, Size:-50NB/ 2,Length =1150mm, Flange:-as per ANSI B16.5 class-150 SORF,PCD=120.6mm X 4 bolts. MOC:- AISI321( Hose braiding & Coorugated hose), AISI304 (Flanges & end fittings). As Per NALCO Drawing No:-NALCO/MECH/SGP/1681.Conforming to BS 6501 Part-1 1991.Application:- For Turbogenerator control oil hoses, Max Working Pressure-12.0 KG/CM2, Max Workingtemp=100Deg C. Medium:-Servoprime 46T lub oil. 6 EA 3 FLEX.HOSE-HP SERVO MOTOR POWER OIL LINE16025008080_3_1000067702_UOM_EA FLEXIBLE HOSE FOR HP SERVOMOTOR INLET POWER OIL LINE OF 18.5 MW TG(EG 800-2) SETS AS PER BHEL DESIGN. Specification:- SS wire braided flexible corrugated hoses with flange swivel connection with stub end at both ends, Size:-50NB/ 2, Length =1000mm, Flange:-as per ANSI B16.5 class-150 SORF,PCD=120.6mm X 4 bolts. MOC:- AISI321( Hose braiding & Coorugated hose), AISI304 (Flanges & end fittings). Conforming to BS 6501 Part-1 1991. Application:- For Turbogenerator control oil hoses, Max Working Pressure-12.0 KG/CM2, Max Workingtemp=100Deg C. Medium:-Servoprime 46T lub oil. 6 EA 4 FLEX.HOSE-LP SERVO MOTOR POWER OIL LINE16025008220_4_1000067702_UOM_EA FLEXIBLE HOSE FOR LP SERVOMOTOR INLET POWER OIL LINE OF 18.5 MW TG(EG 800-2) S SET - BHEL DESIGN Specification:-SS wire braided flexible corrugated hoses with flange swivel connection with stub end at both ends, Size:-25NB/ 1, Length =525mm, Flange:-As per ANSI B16.5 class-300 SORF,PCD=91mm X 4 bolts. MOC:- AISI 321 ( Hose braiding & Coorugated hose), AISI 304 (Flanges & end fittings). Conforming to BS 6501 Part-1 1991.Application:- For Turbogenerator control oil hoses, Max Working Pressure-12.0 KG/CM2, Max Workingtemp=100Deg C. Medium:-Servoprime 46T lub oil. 5 SS wire braided flexible hose, Size:1/2- 87602308540_8_1000067702_UOM_EA 1/2 (0.5 inch) SS wire braided flexible corrugated hoses with single braiding and flange swivel connection with stub end on both ends. Size:-1/2,Length upto flange end=250mm, Flange:- ANSI B16.5 class-150 SORF. MOC:- AISI321(Hose braiding & Corrugated hose), AISI 304(Flanges & end fittings). Conforming to BS 6501Part-1:1991. Application:-Max pressure :- upto 50 bar, Max Temp:--110 deg, Medium:- Lub oil Servo prime 46T/Seal water Hose shall be supplied along with 2 nos SS-304 counter flanges. 15 EA 6 SS wire braided flexible hose, Size:3/4- 87602308550_9_1000067702_UOM_EA 3/4 ( 0.75 inch) SS wire braided flexible corrugated hoses with single braiding and flange swivel connection with stub end on both ends. Size:-3/4,Length upto flange end=250mm, Flange:- ANSI B16.5 class-150 SORF. MOC:- AISI321(Hose braiding & Corrugated hose), AISI 304(Flanges & end fittings). Conforming to BS 6501Part-1:1991. Application:-Max pressure :- upto 50 bar, Max Temp:--110 deg, Medium:- Lub oil Servo prime 46T/Seal water Hose shall be supplied along with 2 nos SS-304 counter flanges. 15 EA 7 SS wire braided flexible hose, Size:1- 87602308560_10_1000067702_UOM_EA 1 (one inch) SS wire braided flexible corrugated hoses with single braiding and flange swivel connection with stub end on both ends. Size:-1, Length upto flange end=250mm, Flange:- ANSI B16.5 class150 SORF. MOC:- AISI321(Hose braiding & Corrugated hose), AISI 304(Flanges & end fittings). Conforming to BS 6501Part-1:1991. Application:-Max pressure :- upto 50 bar, Max Temp:--110 deg, Medium:- Lub oil Servo prime 46T/Seal water Hose shall be supplied along with 2 nos SS-304 counter flanges. 15 EA 8 TG#1,2,3 Turbine JOP inlet Hose16025008090_5_1000067702_UOM_EA TG#1,2,3 Turbine JOP inlet Hose . Specification of Hose :-High pressure hydraulic hoses as per ISO 1436 1SN R1AT/EN853-1SN/ SAE 100R1AT, Flame resistant. Size:- I.D 5/16 [7.9mm], Length of hose upto/ excluding fittings:- 660mm Application:-Oil hoses inside Turbine bearing housing, Medium:- Servoprime 46T, Max WP=215bar, Max temp=100Deg. End fittings of Hose:- a) One side--With SS-304 Banjo bolt assy [Banjo bolt hole=14mm, banjo bolt thread OD= 12.9mm, Total bolt length =48mm] and b) Other side:--female thread swivel nut. Hose to be supplied, complete with banjo bolt, nuts, bush & washers as well as Swivel nuts. Banjo bolt & swivel nut dimensions shall be collected by party after placement of P.O. 9 TG#5 Generator JOP inlet Hose16025008100_6_1000067702_UOM_EA TG#5, Generator JOP inlet Hose . Specification of Hose :- High pressure Non-conductive Thermoplastic hydraulic hoses Conforming to SAE 100R8, requiring high lelectrical insulation or non-conductivity. Size:-ID 3/8, Length=600mm, . Application:-Oil hoses inside Generator bearing housing, Medium:- Servoprime 46T, Max WP=280bar/4000psi, Max temp=100Deg. Shall have increased resistance to abrasion, low change in length with petroleum based fluids. CONSTRUCTION:- Core:-- Thermoplastic elastomer, Reinforcement:-- Two or more braids of aramid/ synthetic fiber, Cover:- Polyurethane. End fittings of Hose:-- Female swivel nut with 90deg elbow on One side and Female thread swivel nut on other end. Swivel nut dimensions shall be collected by party after placement of P.O. 20 EA 10 TG#3 Generator JOP inlet Hose16025008110_7_1000067702_UOM_EA TG#1,3 Generator JOP inlet Hose . Specification of Hose :- High pressure Non-conductive Thermoplastic hydraulic hoses Conforming to SAE 100R8, requiring high lelectrical insulation or non-conductivity. Size:-ID 5/16, Length=600mm, . Application:-Oil hoses inside Generator bearing housing, Medium:- Servoprime 46T, Max WP=280bar/4000psi, Max temp=100Deg. Shall have increased resistance to abrasion, low change in length with petroleum based fluids. CONSTRUCTION:- Core:-- Thermoplastic elastomer, Reinforcement:-- Two or more braids of aramid/ synthetic fiber, Cover:- Polyurethane. End fittings of Hose:-- Female swivel nut with 90deg elbow on One side and Female thread swivel nut on other end. Swivel nut dimensions shall be collected by party after placement of P.O. 20 EA 11 3/8FLEX.HOSE(700MM LONG+END FITTINGS)- 14603064080_11_1000067702_UOM_EA 3/8 Flexible hose, Length=700mm, With Female threaded Swivel nuts crimped on both ends. Application:-Max pressure :- upto 50 bar, Max Temp:--110 deg, Medium:- Lub oil Servo prime 46T/Seal water. Hose shall be conforming to SAE 100R1. 25 EA 12 FLEX.HOSE 1/4NPTF*800L,BOILER #4- 14356181830_12_1000067702_UOM_EA Flexible hose 1/4 X 800mm Length, SS Wire reinforced Flexible hydraulic hose with Female threaded Swivel nuts [BSPF] crimped on both ends . Application:-Max pressure :- upto 215 bar, Max Temp:-- 100 deg, Medium:- Oil hoses inside Turbine bearing housing with Lub oil Servo prime 46T. Hose shall be conforming to SAE 100R1. Total Quantity : 185
