Tender For Supply Of Materials In Various Works, Thrissur-Kerala

Tender For Supply Of Materials In Various Works-1.01 Quarry Waste 1.02 Stone Aggregate(single size): 40 mm nominal size 1.03 Stone Aggregate(single size):20 mm nominal size 1.04 Stone Aggregate(single size): 10 mm nominal size 1.05 Coarse sand (zone III) 1.06 Portland Cement 1.07 Twisted steel/deformed bars 1.08 Solid block of size 30x20x15 cm 1.09 PVC pipe 63 mm outer dia 4kgf/cm2 1.1 Common burnt clay F.P.S. (non modular0 bricks class designation 7.5 1.11 Fine sand 1.12 PVC bend 63mm dia 1.13 PVC end cap 63mm dia 1.14 PVC Tee 63x63x63mm dia 1.15 PVC Socket/coupling 63mm dia 1.16 Polyethelene water storade tank with cver and suitable locking arrangement 1.18 Boulder 50 mm to 200 mm 1.19 GI Pipe 40 mm dia 1.2 Red oxide zink cromate primer 1.21 Galvanized wire mesh 1.22 Wire nails 1.23 synthetic enamel paint in black or choklate shade 1.24 GI Trafford prifile sheet 0.35 mm thick 1.25 Bitumen washer 1.26 Stainless steel screws 50 mm 1.27 Bamboo 25 mm dia 2.5 m long 1.28 Solid block of size 30x20x20 cm 1.29 Solid block of size40x20x10 cm 1.3 Structural steel structural toes , angles, channels, RS joist 1.31 Anjili wood planks 1.32 Anjili wood scantles 1.33 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 1.34 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 1.35 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 1.36 Bright finished or black enameled mild steel screws 40 mm 1.37 Bright finished or black enameled mild steel screws 20 mm 1.38 Mild Steel round bar above 12 mm dia 1.39 Flats up to 10 mm in thickness 1.4 Rawl plug 50 mm (designation 10 nos) 1.41 Mild steel round bar 12 mm dia and below 1.42 Welding by electric plant 1.43 Mild steel tubes hot finished welded type 1.44 Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile 1.45 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) 1.46 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 1.47 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 1.48 Acrylic exterior paint 1.49 Exterior primer 1.5 Plastic emulsion paint 1.51 Pink primer (for wood) 1.52 Vitrified floor tile 60x60 cm 1.53 Vitrified floor tile 50x50 cm 1.54 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 1.55 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. 1.56 200 mm Aluminium aldrop 1.57 Iron hooks & eyes 100 mm 1.58 Anodised Aluminium tower bolt (barrel type)300x10 mm 1.59 Chromium plated Brass screws 30 mm 1.6 Vitreous china flat back wash basin 550x400 mm 1.61 15 mm C.P.brass tap 1.62 C.P. brass waste 32 mm 1.63 C.I. bracket for wash basin and sinks 1.64 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 1.65 PTMT - Towel Rail (600 mm) 1.66 Second class teak wood in scantling 1.67 Chromium plated Brass screws 25 mm 1.68 Rectangular shape 453x357 mm Mirror with Plastic moulded frame 1.69 Hard board 6 mm thick 1.7 Brass stop-cock 15 mm dia 1.71 Brass full way valve with C.I. wheel (screwed end) 25 mm dia 1.72 C.P. Brass angle valve 15 mm 1.73 PTMT - Soap Dish/Holder 138x102x75 mm 1.74 Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers 1.75 Vitreous china pedestal type wate closet 1.76 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 1.77 Rawl plug 50 mm (designation 10 nos) 1.78 Vitreous china pedestal type wate closet 1.79 PVC pipe 50 mm outer dia.6kgf/cm2 1.8 PVC pipe 110 mm outer dia. 4kgf/cm2 1.81 PVC pipe 63 mm outer dia . 6kgf/cm2 1.82 PVC pipe 40 mm outer dia. 10kgf/cm2 1.83 PVC pipe 25 mm outer dia. 10kgf cm2 1.84 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 1.85 PVC Elbow 63 mm dia 1.86 PVC pipe 20 mm outer dia 10 kfg/cm2 1.87 PVC pipe 32 mm outer dia. 10Kgf/cm2 1.88 PVC vent cowl 63 mm dia 1.89 PVC pipe 32 mm outer dia. 10Kgf/cm2 1.9 PVC 45 degree Elbow 63 mm dia 1.91 PVC Reducer 63x50 mm dia 1.92 15 mm PTMT bib cock 1.93 G.I. pipes 40 mm dia 1.94 G.I pipes 50 mm dia 1.95 Precoated galvanised steel plain ridges 1.96 PVC pipe 32 mm outer dia 6Kgf/cm2 1.97 Interlocking C.C. paver block (80 mm thick, M-30)

INR 3004 /-

INR 50000.0 /-

INR 51.83 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document-1	347.98 KB
Click here to download tender document	Tender Document-1	293.5 KB
Click here to download tender document	Tender Document-1	200.12 KB
Click here to download tender document	Tender Document-1	1.44 MB