Tender For Furnishing And Electrical Work Of 4 Branches--1 Full Ht. / Partly Glazed Partition/ Cash cabin ptn Providing & fixing of FULL HEIGHT PARTITION (HT. 9-0) partly glazed, made of 1.75 x 1.75 x 16 gauge Aluminium extruded sections at 24” c/c both ways. The bottom member shall be aluminium extruded sections of size 65mm X 44mm X 16 gauge. The aluminium extruded sections frame shall be fixed rigidily at floor level with rawl plugs/ steel lugs / screw. The frame work to be clad with 6mm thk ply of CENTURY/ GREEN/SUPA/ROLX/ACTION TESA/ Make on both faces finished with 1mm thick laminate of CENTURY/ AMULYA/ GREENLAM/SUPA Make and shade as approved minimum 5 mm thick glass of MODI/SAINT- GOBAIN/ASAHI with etching as required) on the glazed portion. The work includes spirit polishing of shade on woodwork and teak beading etc. Complete in all respects to the complete satisfaction of the Architect. Including doors but excluding cost of door closers, mortise locks. Door closer should be of GODREJ/OZONE & mortise lock of GODREJ. The job also includes removing of existing partition and dumping the malba at authorized malba dumping ground. Partly glazed partitions to have 5.0mm thk. clear glass panels (above 3’-0”upto 7’-0”)with etching as per design and instructions of the architect.(The partition shall have doors as per design same as partition and are included in the quantities) 2 Low Ht. Partly Glazed Partition Providing & fixing of LOW HEIGHT PARTITION (HT. 4-6) made of 1.75 x 1.75 X 16 gauge aluminum extruded sections @ 16 c/c vertically & horizontally. The bottom member shall be aluminum extruded sections of size 65 mm X 44 mm X 16 guage. The aluminum extruded sections frame shall be fixed rigidily at floor level with rawl plugs/ steel lugs / screw. The frame work to be clad with 6mm thk commercial ply of Century/ Green/Supa Make on both faces finished with 1mm thick laminate of of CENTURY/ SUNMICA/ GREENLAM/Supa Make of approved shade. Till the height of 3-0 and 1-6(12mm thk.) glass with Etching of MODI/ SAINT GOBAIN/ASAHI on top complete with teak beading, The spirit polishing teak sections of approved shade as per drawing Complete in all respects to the complete satisfaction of the Architect. 2A 12mm Thk. Glass Partition Providing & fixing of 12mm Thk. Glass Partition with Etching of MODI/ SAINT GOBAIN/ASAHI on top of tables and in front of cash counter etc complete with D Brackets/ teak beading as per drawing Complete in all respects to the complete satisfaction of the Architect. 2B UPS Room Partition Providing & fixing of UPS Room PARTITION (HT. 7-6) made of 1.75 x 1.75 X 16 gauge aluminum extruded sections @ 16 c/c vertically & horizontally. The bottom member shall be aluminum extruded sections of size 65 mm X 44 mm X 16 guage. The aluminum extruded sections frame shall be fixed rigidily at floor level with rawl plugs/ steel lugs / screw. The frame work to be clad with 6mm thk commercial ply of Century/ Green/ROLX/SUPA Make on Outer face and 8mm thk Bison Board on Inner face/ 12.5mm Gypsum board finished with 1mm thick laminate of of CENTURY/ SUNMICA/ GREENLAM/SUPA Make of approved shade on outer face and enamel paint on inner face complete in all respects to the complete satisfaction of the Architect. Including doors but excluding cost of door closers, mortise locks. Door closer should be of GODREJ/OZONE & mortise lock of GODREJ The spirit polishing teak sections of approved shade as per drawing 3 Officer’s Table a) Providing and supplying table of size 5’-0” x 2’-6”x 2’-6” for the Officers to be made out of 19mmthk. Comm. board finished with 1mmthk. approved laminate. The top of the table to have 2”x 1 1/2” t.w. margin in front. The table to have key board drawer on sliding channels and three drawers to be provided as per design & instructions. All internal surfaces to be finished in natural polish. The necessary hardware such as locks, magnetic catcher etc. to be provided as per the designs and instructions. b) Same as above, size 4’-0”/4-3 x 2’-6” x 2’-6” 4 False Ceiling a) Gypsum Board Providing and fixing false ceiling with 1/2” gypsum board on G.I. framing as specified by Gypsum India with 12mm thk Gypsum board in perfect level with smooth finish with 3 coats of paint. The rates shall be inclusive of making opening for electrical fixtures, A.C. grills, etc. finished as per designs and instructions.(The rate shall be binding for entire building area.) b) Armstrong Grid Ceiling Providing and fixing in position false ceiling of Armstrong 600x600 mmx 15/16mm DUNE supreme RH 99 prima tile with Alum powder coated silhouette grooved sections as per specifications of the company. Note: only plan area will be measured for payment. The rates shall be inclusive of making opening for electrical fixtures, A.C. grills, etc. finished as per designs and instructions.(The rate shall be binding for entire building area.) 5 Pin Up Board Providing and fixing 12mm thk. Soft board covered with approved colour felt on 6 mm thk. Comm. ply back over the walls with 2”x1” p.w wood frame as per the design and instruction. 6 Roller Blinds Providing and fixing Roller blinds ( Trac / vista / Mac make of approved colours ( 50mm / 89 mm width) complete in all respects for managers cabin glazing and front side windows. ( basic rate of fabric shall not be less than Rs 90/- per mtr.)of roller blinds with necessary accessories like channel,string ,control unit ,fabric etc complete 7 Side Credenza Providing and erecting in position low height credenza of 2’-3”/2’-6” height and 1’-4” deep or as indicated on the drawing to be made out of 19mm thk. Comm.board on all the sides and 6mm thk. comm.. ply at the back side and openable shutters to be made out of 19mm thk. Comm. board with all internal surfaces to be finished in natural polish, including hinges, ball catch, handles, locks etc.complete as per the direction. Cupboard shall be finished with 1.0mm thk. approved laminate. 8 Low Height/ Over Head Storage (4’-0”/2’-6”ht.) A) Providing and erecting full height storage cupboard 1’-6” deep to be made thk. comm. ply. The shelves to be provided in 19mm thk. comm. ply with 6mm thk. t.w. leaping frame all four sides. with 6mm thk. comm. ply back & openable shutters to be made out of 19mm thk. comm. board with internal surfaces to be finished with enamel paint. The shelves to be provided in 19mm thk. comm. board at 15” centers or as per the drawings with necessary fittings like 5” brass hings, 3” tower bolt, ball catches, locks, handles etc. finished as per the instructions of the architect. Storage cupboards finished with 1.0 mm thk. laminate. 9 Main Entrance Door and Aluminium Glazing (Glass) a) Providing and fixing in Aluminium ( powder coated of approved colour ) new Main entrance doors (2 nos) 4’-0”x7’and Glazed Partition with one shutter to be made out of 4”x1.75” Section 2mm thick and 8” bottom rail with 8mm thk. toughened float glass complete including beading ,etching, etc as per the design. The door handles on both sides to be of stainless steel 15” high.The job includes heavy duty floor spring machine of Everite make. 10 BM’s Table (5’-6”x 2’-9”) Providing and supplying table for the Manager with 10mm beveled glass incl hole for cable manager of approved make to be fitted on top and obtain the total height of 2’-6”to be made out of 19mmthk. Comm. board finished with 1mmthk. approved laminate. The top of the table to have 2”x 1 1/2” t.w. member in front. The table to have key board drawer on sliding channels and storage box with two drawer and openable shutter. All internal surfaces to be finished in natural polish. The necessary hardware such as locks, magnetic catcher etc. to be provided as per the designs and instructions. 11 Hardware a P/F hydraulic door closer ISI marked to door openings to bank’s approval. Make: Godrej. b P/F S.S finish Mortise Lock Make: Godrej c P/F Night latches ISI marked godrej make in cash counter door complete in all respects to bank’s approval. Make: Godrej d P/F Multipurpose locks on drawers, shutters, etc. Make: Godrej 12 Cash Counter Providing and erection in position single window cash counter 2’-6” wide and 3’-9” height to be made out of 19mm th. Comm. Board finished with 1mm th. approved laminate. The top of the counter 12” wide and work top 2’-6” wide made out of 19mm comm. board finished with 1mm thk. laminate as per design. One keyboard drawer and three drawers including telescopic sliding channels to be provided as per the design and instructions and partitions to be made in one drawer for keeping cash. Each drawer to have multipurpose lock. All exposed edges of board shall be covd. with 6mm th. Ist quality teak wood leaping finished with spirit polish as per instruction. The rates shall includes all hardware items such as knobs, handles, hinges, locks etc. to approval and one intermediate open shelf 12” wide in front and 14” wide in the side leg to be provided. 12mm thk. glass with etching & edge polishing shall be fixed above 3’-9” height complete as per design. 17 Cheque Dropping box / Suggestion box Made of 19mm comm.. board, with 1mm thk laminate on all sides. Size: 1’-6”wide x 2’-0”ht x 12”deep complete incl glass shutter at front with lock, etc 18 Voucher Stand Providing and supplying voucher stand made out of 19mm comm. Board 3’-9” high , 1’-6” wide, 4’-0” long finished with 1mm th. Laminate and all exposed edged covd. with 6mm t.w. leaping as per design & instruction of architect 19 Aluminium Jali Providing and Fixing Aluminium Jali in Cash Cabin Partitions and on the top of them complete as per the directions of the Architect 20 Aluminium Composite Panel Cladding Providing & Fixing Aluminium Composite Panel 3mm thk of approved colours over columns at the front complete i/c necessary aluminium framing/ sheets, silicon filling of joints, 12mm grooves, etc Make: Alstone or equivalent. 21 Dismantling Work Dismantling/ Removing/ Refixing of Storage cabinets/ Counters, Alum/ Wooden partitions, networking and electrical fittings/ wires and shifting, etc. Stacking of useable and other materials at suitable place as directed by Branch Incharge/ Architect. 22 Vitrified Tile flooring Providing & Laying Vitrified Tiles of size 2’ x 2’ of Johnson/ Kajaria/ Nitco make to be laid on existing flooring with approved quality tile adhesive such as fevimate-xl,bell endure, laticrete make in thickness not less than 3mm and grouting the joints with white cement slurry mixed with matching pigment, complete in all respects including filling the depressions, if any, as per approved pattern. The cost includes hacking of surface to receive the flooring. Shade: As approved by the Architect. 23 TOILET WITH ALL METRIAL WASHBASIN OR SEAT OR TILES OF WALLS 5 HIGHT TOTAL B ELECTRICAL WORK S.No Description of Item 1 SITC of 36 watt LED fitting, with DRIVER etc. Complete as reqd. Philips Cat no. RC-140B-LED-36W white 2900 iumens or equivalent of Havells / Bajaj with 2x 1.5 sqmm copper conductor. Note: Only one light fixture to be controlled by one switch. 2 SITC of reccess 18 watt LED downlighter assembly with driver complete as reqd. Philips Cat no. Astra slim 900 lumens or equivalent of Havells / Bajaj with 2x 1.5 sqmm copper conductor. 3 SITC of Box type LED fitting 1x20 watt (Philips Slim Line Cool Daylight LED Batten or equivalent of Crompton/ Bajaj ) complete with 2x 1.5 sqmm copper conductor. etc 4 SITC of 450mm sweep wall fan , oscillating type, full metal blades and body, copper motor 3-speed pull control , single piece type propeller Wall/Brackets fan (Supply & Fixing) with 2x1.5 sqmm copper conductor. Make: Orient Tornado/ Crompton. 5 SITC of 300mm exaust fans complete with self opening louvers/ shutters etc with 2x 1.5 sqmm copper conductor complete i/c all modifications as reqd at site ( M/s Crompton cross air or equivalent of Usha / Bajaj ) 6 SITC of 48” sweep ceiling fans white colour complete with electronic step regulator, hanging shackle & suitable down rod as per site conditioning with 2x 1.5 sqmm copper conductor. complete as reqd ( M/s Crompton high breeze or equivalent of Usha/ bajaj ) 7 Electrical Wiring and Points: Providing, laying, fixing & testing of electrical points including wiring with fire retardant PVC insulated copper wire of Finolex make flame guard quality, moulded plate switches. Sockets of approved make in concealed zinc passivated boxes complete with earthing 1.00 mm 2 multistrand wire in PVC pipe 12mm/24mmx2mm ISI marked to be made run on wooden battens, false ceiling, chased in walls, floors. Disposal of malba and repair and finished of same with cement mortar as per existing. Complete job to the satisfaction of the architect. a) 32 amp wiring with MCB to site of outdoor and indoor A/C unit with 2x 4 sqmm multi strand PVC copper conductor wire of 650/1100 volts grade ( Finolex make flame guard quality) with 2.5 sqmm PVC insulated copper earth wire in concealed PVC pipe with 3 way connector & DP switches. b) 15 amp wiring with 2.5 sqmm multi strand PVC copper wire & metal clad enclosure sockets & plugs. incl. Plate switches, sockets, plugs, etc. c) 5 amp plug point wiring with 1.5 sqmm multi strand PVC copper wire incl. Plate switches, sockets, plugs, etc. d) Call bell point wiring incl. Ding dong bell with1.5 sqmm multi strand PVC copper wire incl. Plate switches, sockets, etc. e) Wall fan, lights & exaust fan point wiring with 1.5 sqmm multi strand PVC copper wire from D/Bto switches & fittings incl. plate switches, sockets,etc. 8 Main Control Panel Supply at site installation, testing & commissioning of LT panel fabricated with 16 S.W.G.M.S, sheet. The panel shall be free standing type totally enclosed dust & vermin proof construction with rubber gaskets. The floor mounting panel shall have ISMC mounting channels , GI- earth bus bar, bus bar chamber cable alleys interconnections with solid bar/PVC insulated copper conductor as per requirement, and suitable supports of bus bars. The panel shall be painted with 2 coats of enamel paint (grey shade)over the primer and shall also be provided with designation of incoming & outgoing feeder as per details below: - INCOMING FEEDER a)1 no 0-500 V Voltmeter with selector switch in separate compartment and Amp meter with selector switch and one set of CTs (3 Nos) with CT Ratio 100/5 A with LED type indication Lamps with protection fuses in a separate compartment ( Control wiring of selector switches, Indication lamps and CT’s must be with copper flexible wire of 1.5 sqmm ) b) Main controlling TPN switch with 200 amps. Make L&T. c) Change over TPN 200 amps switch with HRC fuse. Side handle type Make Havells d) 200 amp capacity four strips Copper tinned Aluminium bus bars OUTGOING FEEDER a) 1 no outgoing 200 amp TPN MCCB make Havells, L&T b) 3 no 63 amp TPN MCCB make Havells, L&T c) 2 no 40 Amp DPMCCB make Havells, L&T d) 10 no 32 Amp MCB 9 UPS wiring for computers: a) Supply & erection of wiring set for computers in zinc passivated boxes embedded in walls/ partitions to accommodate set of 6 amp 4 sockets & 1 switch ( Modular ) with 1.5 sqmm copper conductor PVC insulated ISI marked cable alongwith independent earth wire of 1/18 run in 2mm thk. PVC conduits 10 Copper Plate Earthing : a) Supply, installation, testing, connection & commissioning with 2.5 sqmm earth wire of earth stations for computers with 600mm x 600mm x 3mm thk. ( minimum 4.5m deep ) Copper plate electrode complete with 25mm dia B class G.I pipe for watering incl. funnel. 30cm x 30cm x30cm masonary chamber with precasted RCC / C.I cover complete with salt & charcoal filling (as per IS 3034-1987 ) . b) Providing & laying 10mm insulated Copper wire. 11 Computer Networking : a) Providing & laying CAT-VI/ D-Link computer networking cable in PVC conduits in floor/ wall from server room to each table with I.O box ,etc. B) Providing & fixing CAT-VI Patch Cord – 2m long 13 SITC of : a) 8 way Double-Door TPN Distribution Boardfor UPS supply fitted with:-i. 63 Amps TPN ELCB -1No. (To be installed in the Main Panel from where UPS DB wire to be derived up to selector switch)ii. 63 Amps DPMCB -2 Nos. for UPS input supply including ups PANEL input wiring of minimum 10sqmm copper wire of phase, neutral & Earth wiring from main panel to i/p DPMCB iii. 32 Amps DPMCB -1 Nos. for UPS output iv. 6/10 Amps SPMCB - 7Nos. b) 4 Way TP MCBDB Double Door in panel comprising 1 no 63 A 4P Isolator and 12 Nos. 6-32 A DPMCBS etc complete as required. (For lighting & raw power DB) 14 a) P/L Kit Kat 100 Amp for main connection. b) Electrical cable 4 core, 50mm 15 Signage Wiring: Providing & fixing of 3x4 mm2 copper flexible wire & PVC conduiting of ISI make complete with all accessories like saddles, bends, etc. for Signage Wiring.
