Tender For Repair Of Damaged Windows And Repainting Of Substation And Generator Room In Ttrs Thirusulam Campus Chennai. => Limited; 1 Providing new Aluminium handles wherever damaged / missing to match the exisiting handles by removing the aluminium window openable shutter and glass panes and necessary beadings fixed in the window and after providing the necessary new handles in position etc., all as per the direction of Engineer-in-charge. Note: Contractor are requested to remove the glass safely, if damages occurs, the same to be replaced newly. 2 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 3 4.0 mm thick glass panes (weight not less than 10 Kg / sqm) 4 Reparing and servicing of steel casement / Aluminium windows by fixing the damaged portion of frame / Hinges and provision of window stay rod and handles in position and making the same by free movable operation for opening / closing for usable condition etc., all as per the direction of Engineer-in-charge. 5 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surfaceincluding disposal of rubbish to the dumping ground, zinc rich primer coating of forsroc or Equivalent make etc.,complete all as per the direction of Engineer-In-Charge. 6 With cement mortar 1:4 (1 cement : 4 fine sand) 7 Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face, and fixed onwooden /steel frame work, complete as per direction of Engineer-in charge (Frame work shall be paid for separately). 8 12mm thick commercial ply conforming to IS : 1328 BWR type 9 Distempering with 1st quality acrylic distemper, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coats whereverrequired, to achieve even shade and colour. 10 Two coatsor more coats on old work 11 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and coloure:(The rate is inclusive of necessary scrapping and putty wherever is required). 12 Two or more coats on old and new work 13 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 14 Two or more coats on old work 15 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 16 New / Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface including water thinnable priming coat with cement primer for new work (The rate is inclusive of necessary touch up Exterior wall care putty and scrapping wherever is required 17 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Sintex tank white colour three layer) 18 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge. (make Ashirvad or equivalent ) 19 15 mm nominal outer dia Pipes 20 25 mm nominal outer dia Pipes 21 50 mm nominal outer dia Pipes 22 Providing and fixing white vitreous china laboratory sink with C.I.brackets, C.P. brass chain with rubber plug, 40 mm C.P brass wasteand 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making goodthe wall wherever required : (make parryware or equivalent ) 23 Size 450x300x150 mm 24 Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 25 15mm nominal bore 26 Providing and fixing gun metal non- return valve of approved quality(screwed end) : 27 25 mm nominal bore - Horizontal 28 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 29 15mm nominal bore 30 Providing and fixingPolyvinyl Chloride (PVC) pipes, having thermal stability for hot & cold water supply, including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction ofEngineer in Charge. Concealed work/ Exposed on wall, including cutting chases and making good the walls etc. (make Finolex or equivalent ) 31 40 mm pvc pipe 32 Repairing and Servicing of Aluminium door of size 2.10 x 2.10m by replacing damaged floor spring and top pivot in position and making the same by free movable operation for opening / closing of the door for usable condition etc., all as per the direction of Engineer-in-charge. 33 Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete. 34 Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 35 300x16 mm
