Tender For Providing Special Maintenance Repair Works To Flat No:B30 At 76 Tngrhstaylors Road Kilpauk, Chennai-10 For The Year 2024-25; 1 Painting the old ceiling one coat with cement paint of best approved quality including thorough scrapping the existing old surface, including cost of paint, brushes, scaffolding and labour charges for painting etc., complete in all respects with relevent standard specifications and as directed by departmental officers 2 Painting the old wall with two coats of I-class plastic emulsion paintof best approved quality and colour incuding cost of paint, brushes, primer, scaffolding, thorough scrapping the old surface etc., compete in all respectswith relevant standard specification and as directed by departmental officers. 3 Painting old wood work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers 4 Painting old iron work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers. 5 Removing the following broken electrical materials and refixingthe following materials of good qualityAnchor make Dyna whitewith the ISI mark inlcuidng connection , testing and commissioning etc. all complete and as directed by departmental officers. 6 Removing and refixing the unworkable 6Amps switch 1nos (Combined set) 7 Removing and refixing of stepped electronic square type fan regulator 8 Removing and refixing of Gong Bell 9 suitable for 250v 9 Removing and refixing of slant holder for lamp 10 Removing and refixing of PVC Round Block 11 Removing and refixing the unworkable 6Amps switch 4nos & 1no of socket only (Combined set) 12 Removing and refixing of hylem sheet 13 Removing and refixing of Bulk Head Fitting suitable for 100/60 watts lamp with guard heavy duty type 14 Removing and refixing New 16Amps switch with universal socket and indicator (Combined set) 15 Removing and refixing New 6Amps switch-1 No, socket -1 No with indicator(Combined) 16 Removing and refixing the unworkable ceiling fan capacitor 17 Supplying and fixing of20W 4feet LED tubelight of reputed make including cost of LED fittings,LED tube and labour charges for fixing etc., all complete and as directed by he departmental officers 18 Supplying and fixing of 48 ceiling fanhigh speedmake (with out regulator) of approved make including cost of material and labour charges for fixing etc all complete and as directed by the departmental officers. 19 Supplying and fixing of 9 - 225 mm Exhaustfan of approved make including cost of material and labour charges for fixing etc all complete and as directed by the departmental officers 20 Removing the corroded unworkable CP fittings from its position and refixing new metro brand CP fittingwith CP flange of best approved quality (Metro brand)including cost of scrap value of old materials labour charges for removing and refixing etc. all completeand as directed by the departmental officers. 21 CP long body - Bib cock with omega handle 15mm dia with CP flange (Metro brand) 22 Over head Shower 9 arm with flange (Metro Brand) 23 Health faucet with 1.50m tube connection 24 PVC FLUSHING TANK 10LITRES CAPACITY 25 EWC Closet with P or S trap 26 ALUMINIUM BRACKET 27 PVC Connection hose 28 PVC waste pipe 29 CP angle cock (Metro brand) 30 CP Towel rail 31 CPTwo way angle cock (Metro brand) 32 Removing and refixing the Cast iron floor trap in stainless steel Grating 33 Wash Basin (Parry ware) 34 EWC PVC Seat double flapped Cover (Parryware) 35 CP waste coupling (Metro brand) 36 CP Pilller cock withCP flange(Metro brand) 37 Removing the damaged unworkable entrance door lock from its position and refixing new mortise lock, brass Décor type 6 levers lock withkeys etc. all complete (The brand shall be got approved by the EE & Ad.O before supply) 38 Supply and fixing of Brass Heavy duty door stopper (The brand shall be got approved by the EE & Ad.O before supply) 39 Plainingdoor frames and shutters for making good movement of shutter for closing and openingposition by engaging carpenter including cost of hire charges for plaining materials and labour charges etc. all complete and as directed by the departmental officers. 40 Supply and fixing of Door Catcher(The brand shall be got approved by the EE & Ad.O before supply) 41 Providing additional19mm thick BWR grade plywood plank for ward robe cupboard with lipping alround painting the same with two coats of synthetic enamel paint over one coat primer of best approved qualityincluding cost of all materials ,labour for fixing,painting etc., complete with standard specification and as directed by the departmental officers. 42 Supply and fixing Stainless steel 1 pipe Heavy duty with 2no ofS.S Clamp cost of materials,labour charges and necessary screws etc.,all complete and as directed by the departmental officers. 43 Brick work in cm 1:5 using 2B categroy stock bricks of size 9x4-3/8x2 3/4 for 10 Cum including cost of bricks,labour charges, curing etc., all complete and as directed bydepartmental officers 44 plastering the New wall and Floor Finishing with cement mortor 1:5, 12 mm thick using the river sand including curing and finising neatly complying with standard specification and as directed by the departmental officers. 45 Supplying and fixing Ornamental Glass Selves (0.50mx0.15m) (straight) with stailess steel beading ,handle of best quality including cost of materials and labour charges etc., all complete., 46 Supplying and fixing of shell type mirror 5.5mm thick of size 600mm X 450mm with PVC frame alround and hard board of back side including cost of materials and labour charges etc,all complete and as directed by the departmental officers. 47 Relaying and Paving the floor with best approved quality vitrified tiles of size 600 x 600 x 8 mm of approved colour, shade and quality laid in cement mortor 1:3 (one cement and three sand)20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc.,complete complying with standared specification and as directed by the departmental officers. 48 Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in cement mortor 1 : 2 (One cement and two sand ) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kg / Sqm . neatly in all floors, curing, etc ., complying with standard specification and as directed by the departmental officers. 49 Laying Flooring with following ceramic tiles of size 305 x 305 x6 mm laid over 20mm thick cement mortor 1:3 (One cement and three sand) base mortor over the existing slab / floor including cutting the tiles to the required size with special cutter whenever necessary , laying in position pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. Sq.m etc., complete complying with standard specification . 50 Removing and replacing the floor with Cuddapah Slab 38 / 40mm Thick of approved quality over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment andpointed neatly with same cement mortar without any air gap in the slab neatly and fixing in position as per standard specifications and as directed by the departmental officers. 51 Dismantling and Removing the Floor tiles, wall tiles in kitchen flat form and removing the cuddapah stone in working platform of kitchen without damaging the existing structure clearing away the debris away from the site to a initial lead of 1 Km including cost of labour etc., all complete 52 PVC Panelled door Shutters Hollow Type - 200mm x20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary aluminium hinges and other furniture fittings 53 Labour charges for Dismantling the damaged plastering in the walls and packing the joints with cement morter mixed with bonding agent and finished the surface with good cement neatly etc all complete and as directed by the departmental officer 54 Solid Panel PVC door without frame shutter of size (1X0.66X2.05m) using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.etc. complete and as directed by the departmental officers.The materials should be got approved by the EE&ADO before use 55 Reworkable and removable of movementable panels Servicing Aluminium sliding windows and fixing the same glassandchanging Rubber beeding above the glass panels, replacingthe lock,changing the movementable handleincluding cost of materials and labour charges for removing and refixingetc.,all complete and as directed by the departmental officers.
