Tender For Annual Rate Contract For Removal Of Leakages Under Jen Hq Mahajan, bikaner-Rajasthan

Annual Rate Contract For Removal Of Leakages Under Jen Hq Mahajan- 1 Removing of Leakages 2 Repairing of leakage in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE pipe lineup to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost) 3 In all type Soil AC/PVC/HDPE pipe 4 50/63/75mm 5 80/90mm 6 100/110mm 7 125/140mm 8 150/160/180mm 9 200/225mm 10 250/280mm 11 Add on above item no. 4 to 10 for B.T. Road- 5% 12 Add on above item no. 4 to 10 for C.C. Road. Pit in CC Road shall be cut in optimum size through CC cutter Machine only. - 15% 13 Minor repair of leakages such as lead caulking, plugging, clamping and ring fixing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site to make repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as lead wool, white hump, plugs, clamps etc. shall be provided by Department free of cost) 14 In all type Soil 15 50/63/75mm 16 80/90mm 17 100/110mm 18 125/140mm 19 150/160/180mm 20 200/225mm 21 250/280mm 22 Add on above item no. 15 to 21 for B.T. Road- 5% 23 Add on above item no. 15 to 21 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 24 Replacement of CI/ DI Double flange sluice valves,non return valves,butter fly valves etc. in existing Distribution/Rising Main/Transmission Main pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including providing and fixing MS Nut and Bolt and rubber gasket, dewatering and providing adequate safety arrangement at site andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as Valve, Tail piece, CID Joints etc. shall be provided by Department free of cost) 25 In all type Soil 26 80 mm 27 100 mm 28 125 mm 29 150 mm 30 200 mm 31 250 mm 32 Add on above item no. 26-31 for B.T. Road- 5% 33 Add on above item no. 26-31 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 34 Removal of Choking from pipe line, including tree roots, malba, sand and otherby manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/uPVC pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit. 35 In all type Soil 36 75 mm 37 90/80 mm 38 110/100 mm 39 140/125 mm 40 180/160/150 mm 41 225/200 mm 42 250 mm 43 Add on above item no. 36-42 for B.T. Road- 5% 44 Add on above item no. 36-42 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 45 Work of Inter Connection in AC/PVC/HDPE pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost). 46 In all type Soil 47 80 mm to 110 mm 48 125 mm to 165 mm 49 200 mm to 300 mm 50 Add on above item no. 47-49 for B.T. Road- 5% 51 Add on above item no. 47-49 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 52 Labour charges for removal of complaint of polluted water supply to the consumers 53 Survey of the locality of polluted water supply for preliminary assessment of source of pollution during supply hours 54 Labour charges for digging of pit of suitable size for removal of water pollutiononexisting distribution AC/PVC/uPVC/HDPE pipe linesup to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault in pipe line byfixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. The rate includes all labour charges to complete the work for pipe size 55 In all type Soil 56 50 to 75 mm 57 80-110 mm 58 125 to 165 mm 59 200 to 300 mm 60 Add on above item no. 56-59 for B.T. Road- 5% 61 Add on above item no. 56-59 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 62 Repairing of leakage in existing Distribution/Rising Main/Transmission Main CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and thenrefilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost) 63 80mm 64 100mm 65 125mm 66 150mm 67 200mm 68 250mm 69 300mm 70 Restoration of bitumen road by patch work of WBM using crushed / broken aggregate as per the standard specification and consolidation with hand rammer spreading and consolidation of binding material , cleaning of surface of WBM and providing of seal &tack coat as per site condition by using ready cold mixup to the satisfaction of engineer in charge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job. 71 Restoration of cement concreteroad including making of pit in regular shape, ramming and consolidation of surface, laying, positioning and compactingcement concrete ( M-20 ) minimum thickness 200 mm upto the satisfaction ofengineer incharge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job.

INR 1000 /-

INR 20000.0 /-

INR 10 Lakhs /-