Tender For Providing Ms Perforated Sheet Covering To Kitchen Store Partition And A Wing Main Entrance Canopy Dampness Repair At Ladies Hoste Aiish Main Campus, mysore-Karnataka

Tender For Providing Ms Perforated Sheet Covering To Kitchen Store Partition And A Wing Main Entrance Canopy Dampness Repair At Ladies Hoste Aiish Main Campus; 1. Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6mm angle iron and 3 mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-charge 11.16 Sqm 2. Enamel painting: Painting steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m2 over an under coat of primer applied @ 0.80 L/10 m2 of approved brand and manufacture including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineering-in-charge 33.00 Sqm 3. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal or rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge 25.20 Sqm 4. PCC for canopy haunch & slope correction: Providing and laying in position cement concrete for all sub structures of building, irrigations works, sub structure works of bridges, Drain works & other parallel works from 0.50 m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and the aggregates as per relevant IS codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) using 20 mm nominal size graded crushed coarse aggregates 1.25 Cum 5. External wall water proofing painting on canopy surface: Providing and Applying high build Acrylate Copolymers- based elastomeric waterproof coating for external wall, parapet & Chajja, which is single component, cold applied, acrylic emultion polymer. Apply coat 1st coat with 10% dilution water and 2nd coat without dilution @ 0.27L/m2 in 2 coats to achieve DFT of 110 microns, The material having followed technical properties: Attains hairline crack bridging up to 1 mm, Elongation of>120% as per ASTMD 412; Tensile strength 1.50 Mpa per ASTM D 412, pull off adhesion, 1.5Mpa as per ASTM D4541, including priming the surface with 1 coat diluted with water in the ratio 2:1 spreading @ 0.125 L/m2 as selfpriming coat. The finished coat to include surface preparation, making coving at Junction, treatment of cracks completely as per specification 25.20 Sqm 6. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge 91.45 sqm

INR 500 /-

INR 1950.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB