Tender For Supply, Erection, Installation, Testing And Commissioning Of Material/ Equipment For Segregation Of 11 Kv Mixed Feeders At Kotputli-Behror Circle Of Jaipur Discom Of Rajasthan State Under Rdss On Turnkey Basis Against Tn-560, kotputli-Rajasthan

Supply, Erection, Installation, Testing And Commissioning Of Material/ Equipment For Segregation Of 11 Kv Mixed Feeders At Kotputli-Behror Circle Of Jaipur Discom Of Rajasthan State Under Rdss On Turnkey Basis Against Tn-560-PCC Poles 2 PCC Pole 9 mtrs long (400 KG) 3 PCC Pole 9 mtrs long (200 KG) 4 Outdoor 11 KV O/D VCB KIOSK complete with accessories including use of special tools 5 Armoured Cable of size 2C X 4 SQ.MM. 1100 Volts PVC Insulated including supplyof ferrules 6 Control Cable of size 12C X 2.5 SQ.MM. 1100 Volts PVC Insulated including supply of ferrules 7 Overhead steel cored aluminum ACSR DOG[100SqMM(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing 8 Overhead steel cored aluminum ACSR Rabbit conductor in all respect 9 Earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length with GI wire and clamp as per latest specification and drawing adopted & approved by NIGAM. 10 MS earthing rod 20mm dia, 3 meter long for substation earthing 11 CTPT structure Set (Galvanized) 12 11KV CT PT Set(200/5 Amp.) 13 MIP meter box for meter with TTB 14 GI Nut & Bolt assorted Size 15 GO double break without EB Isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc. 16 11KV ( with 9 x 24 KV Post Insulator ) 400 Amp. 17 Horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc. 18 11KV ( with 6 x 24 KV Post Insulator ) 1 Set=3 NOS 19 Supply of Insulators 20 11KVPorcelain Disc.insulators B&S type 45KN 21 Hardware for 11KV disc insulator B&S type 45KN 22 Composite Polymer insulators 23 11KV Polymer Disc.insulators T&C type 45KN 24 Hardware for 11KV disc insulator T&C type 45KN 25 11 KVcomposite polymer Pin Insulator complete in all respect 26 PG clamps for suitable ACSR DOG Conductor 27 PG clamps for suitable ACSR Rabbit Conductor 28 11 KV Danger plate of size 200 X 250 mm complete in all respect 29 Supply of Angle and Channel 30 M.S Channel 100x50x6 mm 31 M.S Channel 75x40x6 mm 32 M.S. Flat 50 X 6 mm (Galvanized) 33 1.4 Mtr Channel bracket with clamp 34 Supply of Lightening arrestors 35 Substation type 9KV, 10KA station class (1Set=3 Nos.) lightening arrestors. 36 11kV Double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from M.S.Channel 100 X 50 X ISMC ( 9.56 KG. PER MTR.) ISA M.S.Angle 65 X 65 X 6 MM, M.S.Angle 50 X 50 X 6 MM AND M.S.Flat 50 X 6 MM(Galvanized as per IS) 37 GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, 38 Strain/Guy insulator for stay set 39 7/10 SWG GI Stay Wire 40 GI Wire 8SWG 41 UNDERGROUND CABLE FOR WORKING VOLTAGE OF 11KV ALUMINIUM CONDUCTOR (IS 7098) CABLE XLPE ARMOURED 42 Under ground Cable of Size 3X185 SQ.MM for 11 KV 43 G.I. PIPE OF 125 MM DIAMETER, B-CLASS (IS:1239 MARK) 44 GI PIPE for Cable Support at Pole ( Each 3.3 Mtr ) 45 CABLE FOR11 KV ALUMINUM CONDUCTOR XLPE ARMOURED HT CABLE 46 XLPE 3X185 SQ.MM H.S. ON OUTDOOR TYPE 47 XLPE 3X185 SQ.MM H.S.S.T. JOINT 48 11.4 MTR. Long lattice tower made of 50 X 50 X 6 MM M.S. angle with 50 X 6 MM M.S. FLAT for bracing as per nigam specification 49 11KV Cross Arm with Top Hamper with clamps made of MS Angle 65x65x6mm, clamp 50X6 mm, earth clamp 50X6 mm (Galvanized) 50 Fixing of 11/0.4 KV SubStation structure set for Three Phase 25 KVA transformer on double poles in all respect.weight(As per Specification and Drawing without GO channel) of Approx=166.67 kg (All galvanized as per relevant IS) 51 Fixing of 11/0.4 KV SubStation structure set for Three Phase 63 KVA transformer on double poles in all respect.Weight (As per Specification and Drawing with GO channel) Approx=219.54 kg (All galvanized as per relevant IS) 52 11 /0.4 KV Al wound, Three Phase Distribution Transformer (Completely self protected with provision of LT Bushing Box) 53 25 KVA 54 63 KVA 55 6.35/0.24KV S/S structure set for single phase transformer on single 9Mtr, 400KG PCC pole in all respects. 56 11KV 100 Amp drop out cum isolator with 3.0 Amp. Fuse & 12 KV Post insulators. 57 LT XLPE Cable 58 Size 4CX70 SQ. mm 59 Size 4CX120 SQ. mm 60 Aerial Bunched Cable 61 Aerial Bunched Cable 1Cx25+1x25 Sqmm 62 Aerial Bunched Cable 3Cx25+1x25 Sqmm 63 Aerial Bunched Cable 3Cx50+1x35 Sqmm 64 LT Distribution pillar Box200A 65 Dead end (anchor) clamps for insulated or bare messenger + one Pole Bracket + 1.5 mtr S.S. (Stainless Steel) Strap + two SS Buckles as per NFC Standard suitable for AB Cable Complete in all respect (galvanized as per IS) 66 Suspension (anchor) clamps for insulated or bare messenger + one Pole Bracket + 1.5 mtr S.S. (Stainless Steel) Strap + two SS Buckles as per NFC Standard suitable for AB Cable Complete in all respect (galvanized as per IS) 67 LT insulation piercing connectors NFC Type A (main to tap) (main 16-50 mm2, Tap off 2.5-16 mm2) 68 LT insulation piercing connectors NFC type B ( main to main) (size 16-50 mm2) 69 LT Bracket with clamp 600mm (2Ft) 70 LT Shackle Insulator with hardware

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	09-11-2024	Amendment in BOQ	BOQ	20-11-2024
2	09-11-2024	Amendment and clarification	Technical Bid	20-11-2024
3	10-12-2024	Extension-2 in bid submission date	Date	26-12-2024
4	20-11-2024	List of feeders	Other	11-12-2024
5	20-11-2024	Extension in bid submission date	Date	11-12-2024
6	27-12-2024	Extension-3 for bid submission	Date	01-01-2025

INR 29500 /-

INR 7120304.0 /-

INR 35.60 Crore /-