Tender For Strengthening Of Water Supply (Supply & fixing Of L. T. Panel, Automatic Starter And Making Lighting Arrangement Of Compound At Oht And Ugr In Sector-50, 50(B) And 51), Noida., 1 S/F of fully Automatic Control panel Starter for 50 H.P. non clog submersible/V.T. Pump sets with following features No-volt, Under-voltage protection, Electronic Overload protection, seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter and indicating lamps as per directions of E/I. (Make: Contractor-L&T (3 nos.), MCCB-L&T (1 nos.), Timer-L&T (2 nos.), VPD-Softhard/Minilec (1 nos.), MPD-Softhard/Minilec (1 nos.), WLC/Seal Moniter-Pumpcare/Kishor (1 nos.), Control Transformer & Auto Transformer-Pioneer/Electracare (1 nos.), WTR-Minilec (1 nos.), C.T.-A.E. (3 nos.), Auto/ Manual switch-Salzer (1 nos.). (AOR) 2 Design, Supply, Erection, Testing and Commissioning of Main L.T. Panel dust and vermin proof made out of 14-16 SWG, C.R.C. sheet with Power Coated paint havingincomer of 400 Amp M.C.C.Bs., 400 Amp. Change Over Switch and Six outgoing of 100 Amp. M.C.C.Bs. with Motor Protection Relay having 3 Nos. Aluminium bus bars of 600 Amp capacity for three phase and One Aluminium bus bar of half capacity for netural & Two outgoing for 63 Amp TPN for lighting and external use with voltmeter, amp meter, selector switches, indicating lamps etc. Make:- MCCB/Changeover-L&T/Schnider/ABB, Meter-L&T/A.E., Selector Switch-L&T, Current Transformer-A.E. (AOR) 3 S/F of Flat Cable25 Sqmm.x3 Core Finolex make (AOR) 4 Supply and burying of 40 mm dia x 4.50 meters long GI pipe vertically for earthing having 12 mm dia holes spaced 75 mm apart drilled upto 2.00 meter from the bottam complete with earthing lead of No.-6 to 8 SWG GI Wire in GI Pipe up to appron (and from appron to switch board the cost of GI wire and pipe will be extra) upto switch board, 30 cm square CI box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coak and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing. (PS No.-701) 5 Supply & fixing steel tubular pole 7.50 Metre long designated 410 SP-4 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (PS No.-605) 6 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8.0 metre. (DSR-18, I.No.-11.3.2, P-39) 7 Painting of the electric pole & channal with 2 coats of Aluminium paint over red oxide primer complete in all respects. (PS No.-634) 8 S/F of Sintex type Junction Box model No.-IIGSJB 2817 of size 240x130x110 mm with hinges & locking arrangment & M. S. Clamp of 50x6 mm flat, complete in all respect and chuck nut for cable connection etc. as per direction of E/I. (AOR) 9 S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grade at a depth of below ground level over a cushion of 750 mm below ground level over a cushion of 75 mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS No.-501) 10 10 Sqmm. 2 core. 11 16 Sqmm. 2 core. 12 S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. (PS. No.-504) 13 16 Sqmm 14 25 Sqmm 15 240 Sqmm 16 400 Sqmm 17 S/F of earth elctrode for lighting conductor of 600mm x 600mm x 6mm GI plate vertically with its top at least 3.0m below ground level complete with 20mm GI pipe for watering funnel, 30 cm square C.I. Box with cover masonary housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per direction of E/I. (PS No.-706) 18 S/L of 25mm x 3mm GI strip from each electrode directly in the ground complete in all respect. (PS No.-716) 19 Supplying and laying of OD/ID-63/51 DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (DSR-18, I.No.-14.15, P-49) 20 S/F of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection Complete in all respect. Cat-AA (PS No.-1422) 21 S/F of Recess/Surface/Pendent mounting round 24 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. Cat-AA (PS No.-1404) 22 S/F of LED Tube Light with Batten suitable for upto 1x22 Watt LED Tube Light complete i/c Tube etc. on surface complete in all respect. Cat-AA (PS No.-1413) 23 S/F of 400 Amp. 415 V metal clad TPN CFS complete with HRC fuse set etc. on angle iron frame complete in all respects Cat B. (PS No.-356) 24 Wiring point for light with 1.5 sqmm FR PVC inslulated multistrand single core copper conducter cable as earth wire drawn inside the conduit in heavy gauge PVC conduitpipe in the wall parrtily concealed in wall & partialy laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch & celling rose/angle/batten holder on 3mm. thick phenolick laminated backelite sheet etc. complete in all respects, as directed, i/c matching colour wash. (PS No.138C) 25 Wiring point for Plug with 1.5 sqmm FR PVC inslulated multistrand single core copper conducter cable as earth wire drawn inside the conduit in heavy gauge PVC conduitpipe in the wall parrtily concealed in wall & partialy laid in slab along with the reinforcement before conrceting, complete with 14 SWG copper earth continuity wire and piano type switch &socket etc. complete in all respects, as directed, i/c matching colour wash. (PS No.-141C) 26 Supply and laying of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality. (PS No.-1136)
