Supply Installation And Commissioning Of Yard Hydrant System Extension , Supply, Installation, Testingand Commissioning Of Di Socketed Pipe, Class K 9 As Peris: 9523, Isi Marked For Yard Hydrant Network Of Size As Under: , 100 Mm , 150 Mm , Supply, Installation, Testing And Commissioning Of M.S. `C’ Class (Heavy) Pipe Of Following Size Conforming To Is:1239 And Isi Marked With Fittings (Ms Heavy Duty Butt Welded Fittings With Welded Joints) Elbows, Reducers, Flanges, Rubber Gaskets, Nuts, Bolts, Washers With Suitable Size Clamps, Structural Steel Supports Etc. Providing Two Coats Of Epoxy Paint Of Po Red Colour Shade Over A Coat Of Zinc Oxide Primer: , 100 Mm Dia , Supply, Installation And Commissioning Of Di Special Fitting (Push-On Flanged Spigot And Flanged Socket), Class K12 As Per Is: 9523 & Isi Marked Including Epdm/ Nitrile Tyton Ring Confirming To Relevant Indian Standard & Isi Marked, Rubber Gasket And 8.8 Grade Bolts Of Required Length With Nut And Washer Including Testing Of Joints: , Flanged Spigot 100 Mm , Flanged Spigot 150 Mm , Flanged Socket 100 Mm , Flanged Socket 150 Mm , All Flanged Tee 150 Mm (Body) X 150 Mm (Branch) , All Flanged Tee 150 Mm (Body) X 100 Mm (Branch) , All Flanged Tee 100 Mm (Body) X 80 Mm (Branch) , All Flanged Bend 150 Mm X 150 Mm , All Flanged Bend 100 Mm X 100 Mm , All Flanged Reducer 100 Mm X 80 Mm , All Flanged Reducer 150 Mm X 80 Mm , All Flanged Reducer 150 Mm X 100 Mm , Supply, Installation, Testing & Commissioning Of Double Flanged Stand-Post (Screwed/Welded) Of Ductile Iron Pipe Of Class K-9 Conforming To Is: 8329 And Isi Marked Including Rubber Gasket, 8.8 Grade Bolts Of Required Length With Nut & Washer, Of Size And Length As Under: , 100 Mm X 1.8 M , 150 Mm X 1.4 M , Supply, Installation, Testing & Commissioning Of Non-Rising Spindle Type D.I. Gate Valve With Ss Internals And Stem As Per Is: 14846,Isi Marked, Pn 16 Pressure Rating Complete With 8.8 Grade Bolts Of Required Length With Nut And Washer, Rubber Gasket: , 100 Mm Dia. , 150 Mm Dia , Supply, Installation, Testing And Commissioning Of Single Headed Gun Metal Fire Hydrant Valve, 63 Mm Dia. Instantaneous Type With Gun Metal Coupling, Blank Cap With Chain, Conforming To Is: 5290 And Isi Marked. , Excavation For Laying 150 Mm And 100 Mm Di Pipe At Depth Up To 1.2 M And Then Backfilling The Soil As Required, And Disposing Of Surplus Excavated Soil As Directed, Within A Distance Of 100 M. , In Soft Soil , Road Cutting , Provision And Testing Of T-Connection By Fixing Flanged Socket, Flanged Spigot, Flanged Tee By Cutting Existing Underground Ci Pipe Of Size 150 Mm And Grinding Pipe Ends, Complete With Rubber Ring, Rubber Gasket, 8.8 Grade Bolts Of Required Length With Nut And Washer Inclusive Of De-Watering, Excavation Etc. (Only Labor Charges). , Providing Brick Work Pipe Support For Di Pipe Laid Underground (Extending 150 Mm Above And Below The Pipe With Base Of 100 Mm Pcc Of Trench Width Approx. 450 Mm With Plaster 15 Mm Thick On Brickwork) Of Approx Size 600 X 450 X 600 Mm In Open Trench. , Construction Of Valve Chamber (~200 Mm Brick Work) Of Size 1.2 M X 1.2 M X 1.5 M Complete With 25 Mm Plaster And, Cover Made From Ms 6 Mm Chequred Plate With Provision Of Handle For Lifting Of Cover Plate. , Dismantling Of Ci Pipe Of Size 80 Mm In Open Trench , Dismantling Of Ci Pipe Of Size 150 Mm In Open Trench , Dismantling Of Underground Isolation Gate Valve Of Size 150 Mm , Dismantling Of Underground Isolation Gate Valve Of Size 80 Mm
