Tender For Providing And Fixing Of Office Furniture Of Standard Make That Is Godrej Or Equivalent For Office Of Cfo At Block No. 7, 2Nd Floor Shakti Bhawan Rampur Jabalpur., jabalpur-Madhya Pradesh

Providing And Fixing Of Office Furniture Of Standard Make That Is Godrej Or Equivalent For Office Of Cfo At Block No. 7, 2Nd Floor Shakti Bhawan Rampur Jabalpur.- 1 Supplying and installing of Godrej open plan office system 4 seater ofcubical work top size 1500W1x1500W2X600Dmm with 1200mm penal heightProviding and placing panel & tile based modular workstation, with partition thickness as 52 mm thick and height -1200mm including powder coated aluminium trims.Tiles: Combination of top tiles are clear glass tile. Bottom tiles - prelaminated. INTERMEDIATE BLOCKS Intermediate blocks are given in DL finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look.Worksurface - out of 25 mm thick prelaminated particle board with flat PVC lipping edge banding.Pedestals - Nova pedestal flat metal front, full height free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3drawer = 2box+1file. make Godrej as approved by Engineer In Charge. 2 Supplying and installing of Godrej open plan office systemof cabin type cubical main work top size 1500Wx750DX1500mm penal height and side work top size 900x450x1500mm Penal height Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thick and height -1500mm including powder coated aluminium trims.Tiles: Combination of top tiles are clear glass tile. Bottom tiles - prelaminated. INTERMEDIATE BLOCKS Intermediate blocks are given in DL finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look.Worksurface - out of 25 mm thick prelaminated particle board with flat PVC lipping edge banding of size main work top size 1500Wx600DX1500mm penal height and side work top size 900x450x1500mm Penal height .Pedestals - Nova pedestal flat metal front, full height free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3drawer = 2box+1file. make Godrej as approved by Engineer In Charge. 3 Supplying and installing of Godrej free standing partition panel tile based partition system the partition 50 mm thick 1500mm (H) 1500 mm (L) (As per the specification and attached drawing) for adjusting rectangular workstation 4 Supplying and installing of Godrej free standing partition panel tile based partition system the partition 50 mm thick 1500mm (H) 1200 mm (L) (As per the specification and attached drawing) for adjusting rectangular workstation 5 Supplying and installing ofChair for : The seat and back should be made of Injection molded high inpact strength polypropylene polymer compund with indoor grade UV resistance. Seat Size : 52.5 cm (W) x 53.2 cm (D). Back Size: 51.6 cm (W) x $0.5 cm (H). S.S. UNDERSTRUCTURE : The tubular welded frame is made from Dia 2.22 +/- 0.03 cm X 0.12 +/- 0.0128 cm and 3.5 +/- 0.03 cm X 1.5 +/- 0.03 cm X 0.12 +/- 0.0128 cm stainless steel 202 grade tube. The tubes are buff polished to give shiny finish. SHOE: the shoes are made fo high impact strength PloyPropylene Ploymer compound with indoor grade UV resitance and pressed fitted with tubular frame 6 Supply & Installation of Multipurpose chair : The seat and back should be made from 1.0cm thk. hot pressed water resistant, commercial plywood upholstered with P.U. foam and fabric. The back should be 42.0cm. (W) X 26.5cm. (H) & the seat size should be 42.0cm. (W) X 42.0cm. (D). The Polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2kg. on Hampden machine at 25% compression. The understructure assembly should be cantilever type mainframe made of dia. 2.54cm.(1”) x 14 BG M.S. E.R.W. tube and black powder coated. The armrests should be made in twin tube form using dia.1.58cm. (5/8”) x 16 BG M.S. E.R.W. tube and black powder coated.

INR 2360 /-

INR 29290.0 /-

INR 29.29 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB