Tender For Only Approved Vendors/Empanelled Contractors Of Union Bank Of India, Gorakhpur => Limited, khalilabad-Uttar Pradesh

Tender For Only Approved Vendors/Empanelled Contractors Of Union Bank Of India, Gorakhpur => Limited; 1) SITC of 200Amp Kit kat Fuse unit 3nos with 200 Amp neutral link on wooden board (3 * 3) complete with connections . ( For Total Load ) No 1 2) ELECTRICAL PANEL Design, manufacture, providing, storing & installing in position, effecting proper connection, testing and commissioning of panel made of 14 SWG, CRCA sheet steel. It shall be dust and vermin proof. It shall have compartmentalized construction with bus bar chambers, cable alley, cable glands plate etc. as required, duly painted from inside as well outside. It shall have the following - In commer:-1No. 125 Amp.TPN SFU with HRC fuse -1set Busbar. 150 Amp., 3 phase, 4 strips, 415 volts, 50 Hz. copper busbars with colour coded PVC heat shrinkable sleeves. Instruments. Multi function Meter for Voltage, Ampere, Power factor, KWH, Data 1 No. Outgoing. 4Nos. 63 Amp. TP,16KA M CB (For LDB, PDB, UPS,and Spare Feeder) 32 Amp DP MCB -2Nos ( For Strong Room & Gloshine Board) SITC of 100 Amp 4Pole Off load Change over switch complete The design of panel should be got approved by the Architect before manufacturing. The job shall be completed, to the satisfaction of the Bank Engineer/Architect. No 1 4) UPS I/P, O/P AND DISTRIBUTION a) SITC of 4 WAY TPN DB D.Door as LDB & PDB complete with 2 No. 40 AMP TP 10KA MCB as incomer and 10 NOS. 6-32 AMP. SPMCB as outgoing. No 1 b) SITC of 40 Amp DP MCB 10KA in Metal inclosure for UPS Input / output power supply complete in all respects as required. No 1 c) SITC of 12 WAY SPN DB D. Door as UPS power Destribution Board complete with 1No. 40 AMP DP 10KA MCB as incumer and 16nos 10Amp SP MCB 10KA for outings. No 2 5) LIGHT & Fan RAW POWER & AC Power Distribution Boards a) SITC of 4 WAY TPN DB D.Door as LDB & PDB complete with 1 No. 40 AMP TP 10KA MCB as incomer and 12NOS. 6-32 AMP. SPMCB as outgoing. No 2 Page 6 b) SITC of 4 WAY Horziintal TPN DB D. Door as PDB complete with 1 No. 63 AMP TP 10KA MCB as incomer and 18NOS. 16 AMP. SPMCB as outgoing. No 1 6) CABLES a) SITC of 3.5 Core 35 Sq.mm Aluminium Armoured Cable (From Main Power supply source to 200Amp Kit Kat Fuse Units to Change over Switch to Main power control Panel complete with end termination and all respect as required. Mtr. 55 b) SITC of 4X6.0 +1X 4.0Sq.mm Copper submain wire (Panel to LDB,PDB, UPS input Power supply ) in required dia pvc conduit complete in all respect as required. Mtr. 46 c) SITC of 4X10.0 +1X4 Sq.mm Copper sub main wire (Kit kat Fuse Unit to AC DB, in required dia pvc conduit complete in all respect as required. Mtr. 41 d) SITC of 2X6.0 +1X2.5 Sq.mm Copper wire ( UPS output MCB to UPS DB, ) in required dia pvc conduit complete in all respect as required. Mtr. 57 7) EARTHING a) Preparation and commissioning of earth terminal PIP technology GEL type 80mm dia 3000mm long earth electrod complete in all respect as per Indian Electrical code of practice.( 1No for Main Neutral Earthing, + 1No for Main Panel, LDB, PDB, AC DB body Earthing + 1No for UPS & UPS DB body Earthing + 1No for UPS output Neutral Earthing.) Nos 4 b) SITC of 10 Sqmm PVC insulated Copper Earth Wire from Earth terminal to load point in required dia pvc conduit complete in all respect as required. Mtr. 90 8) UPS POINT a) Supply & Installation of point wiring for premary UPS or stabilized power plug points on workstations / table for computers using 3 X1.5 Sq.mm copper conductor multi starnd FRLSH PVC sheathed flexible wire pulled through floor raceways/conduit and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions. Each point consisting of 2 nos of 10A and 1No 16Amp, 2/3 pin sockets & 1 No., 16A Modular Switch , wired together forming one point. The earth wire of green color only. Nos 12 9) RAW POWER POINT

INR 10000 /-

INR 10000.0 /-

INR 5.40 Lakhs /-