Tender For Internal Electrification In C Type Shop 10 Nos Check Post 02 No And Apf 01 No And Construction Of 1No 110 M Deep 140 Mm Dia Boring Supply Fixing Of 2 Hp Submersible Pump Work At Nmy Shamshabad Agra, Ranga Reddy-Telangana

Tender For Internal Electrification In C Type Shop 10 Nos Check Post 02 No And Apf 01 No And Construction Of 1No 110 M Deep 140 Mm Dia Boring Supply Fixing Of 2 Hp Submersible Pump Work At Nmy Shamshabad Agra, 1 Writing point for light with 1.5 sq. mm.FRLSH PVC insulated multi strand single core copper cable in heavy gaugePVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement beforeconcreting, complete with 1 number 1.5 sq mm. FRLSH PVC insutated single copper conductor as earth continuity wire. modular switch and /ceiling rose /angle holder /batten holder complete in all respects as directed including matching colour wash. 2 Writing point for fan {light duty exhaust fan} with 1.5 sq. mm.FRLSH PVC insulated multi strand single core copper cable in heavy gauge PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting,complete with 1 number 1.5 sq mm. FRLSH PVC insutated single copper conductor as earth continuity wire. modular switch and ceiling rosecomplete inall respects as directed inc. matching colour wash. 3 Writing point for plug with 1.5 sq. mm.FRLSH PVC insulated multi strand single core copper cable in heavy gaugePVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting,complete with 1 number 1.5 sq mm. FRLSHPVC insutated single copper conductor as earth continuity wire.modular switch and socket complete in all respects as directed including matching colour wash. 4 S/F of surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site 5 Supply/Fixing of 6 A to 32 Amp. DPMCB (9/10 K.A.) C- Curve Cat- A 6 Supply/fixing of 5-32 Amp. MCB 9 KA. C-Curve Cat- A 7 Supply and burying of 40 mm dia x 4.5 metres long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I., wire and pipe/will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonary enclosure,funnel at top, alternate layers of charcol . coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 8 S/F of one number 8 to 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sandlabour. T and P other material required for proper completion of the work as directed at site. 9 S/F hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG MSsheet incorporating 10mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C.roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work. 10 Supply and fixing of power plug with 20A/240 V flush typemodular switchand 5 pin 20 A/250 V flush type universal modular socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects. 11 Supplyandwiringof submain with two number 2.5 sq. mm FRLSH PVC insulated 1100 V multi strand singlecore copperconductor cable in 20 mm dia. heavyduty PVC conduit concealed in wall complete with 1 number 1.5 sq mm. FRLSH PVC insutated single copper conductor as earth continuity wire. directed including matching colour wash. 12 S/F of electronic fan regulator Modular 120-280 V ISI Marked on the existing switch board including making connection , required materials, labour T/P for proper completionof work to the satisfaction of engineer in chargeof work. 13 Supplyandwiringof submain with two number 2.5 sq. mm FRLSH PVC insulated 1100 V multi strand singlecore copperconductor cable in 20 mm dia. heavyduty PVC conduit on surface complete with 1 number 1.5 sq mm. FRLSH PVC insutated single copper conductor as earth continuity wire. directed including matching colour wash. 14 Supplyandwiringof submain with two number 6 sq. mm FRLSH PVC insulated 1100 V multi strand singlecore copperconductor cable in 25 mm dia. heavyduty PVC conduit concealed in wall complete with 1 number 4 sq mm. FRLSH PVC insutated single copper conductor as earth continuity wire. directed including matching colour wash. 15 Supply and Fixing of Tape off box 32Amp to 100Amp TPN for Sandwich Auminium bus bar trunkingcomplete in all respect. 16 Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick snd all round and protected with burnt brick on sides and ontop. On surface, the cable run shall be fixed on M.S. clampsetc. of suitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 6 Sq mm 2 Core 17 Supply & fixing of LED street light fittingwith mandatory driver set having die cast Aluminium body and lenses suitable for 75Watt to 90 Watt and diffuser/ reflecto with driver set suitable for 110 to 130 watt. Confiming to IP 66 Protectionhaving company LOGO Engraved complete in all respects. including Labour. 7500-9000 system lumens Mid Power LED with lenses,>100lmW,PP>0.95,THD<10%,at full load,CR1>70, driver set Not Circuitory with 3 year warrantee. Cat-AA 18 Supply and Fixing of surface mounting round light 24watt to 32watt LED down lighter having powder coated die cast aluminium housing with extended heat sink, diffuser/reflector and driver set completed in all respect. Cat-AA 19 Supply and Laying of G I Pipe complete in all respect as per directionof E / I.(a) 50dia mm G.I.Pipe 20 Supply of the following material for installation of submersible pump and other related works for proper completion of work.-Submersible pump ISI Mark 2 H.P 21 Supply and Lowering of 40mm dia ribbed screen Ashirvad PVC Pipe (ISI make)/32mm dia GI Pipe by UPIN and fixed with both side threaded SS nipple complete in all . 22 Cable for Submersible pump 4 sq mm 3 core 23 Transportation of drilling equipment, material T&P etc to the site of work, loading, unloading and proper stacking at the site including return cartage of unused material T&P etc complete. 24 Construction of 150 mm dia bore hole by Rig machine in ordinary soil with kankar, bazri etc including transportation of material, local cutter machine, erection of machine and its dismantling after completion of work including hiring charge of all T&P with arrangement of water required including of all material labour T&P etc required for completion of work. 0-60 m BGL 25 Lowering of 140 mm PVC pipe 10 kg/cm2 ISI make & approved by engineer in charge inside the borehole with jointing material and supply& fixing of plastic wire mesh around the strainer pipes including all labour, T&P etc required for proper completion of work. 0-110 m BGL 26 Supply & shrouding packing coarsepacking graded pe-gravel between bore hole wall & PVClowering 140 mm dia 10 kg/cm2. 27 Installation of 2 HP submersible pump supply of all material and labour, T&P etc complete in all respect. 28 Development of bore hole till the discharges of water become free from sand and turbidity including supply of all labour, T&P. 29 Chemical & bacteriological testing of water sample 30 Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick snd all round and protected with burnt brick on sides and ontop. On surface, the cable run shall be fixed on M.S. clampsetc. of suitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 6 Sq mm 2 Core 31 Supply/Fixing of 32 mm dia GI pipe complete with GI fittings, incluiding all materialscomplete in all respect. 32 S&F of 63 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect.Cat B

INR 1300 /-

INR 55000.0 /-

Refer document