Tender For Repair Of Ms Mandir Ward No 06 - Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-InCharge:15.2.2(1:4:8 ) Or Leaner Mix (I/C Equivalent Design Mix) 2 P, kishtwar-Jammu And Kashmir

Repair of MS Mandir Ward no 06 - Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:15.2.2(1:4:8 ) or leaner mix (i/c equivalent design mix) 2 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8) MIX(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 3 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate 4 15 mm thick plaster on wall of mix 1:6 mix ( 1 cement:6 fine sand) 5 Providing and fixing panelled or panelled and glazed shutters for doors and windows ,celestory windows including ISI marked M.S pressed butt hinges bright finished of reg. Size with neccessary screws excluding panelling which will be paid seperately all complete 35 mm thick shutters in 2nd class K/Wood 6 Providing and fixing panelling or paneeling and glazing in panelled or panelled and glazed doors and windows etc ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured ) panelling for panelled or panelled and glazed shuttersDecorative plywood one sidedecorative venner and commercial venner on other side35 mm thick 7 Provingand fixinng glazed shutters for doorsand windows and celestory windows using kg/sqm (4 mm thick) float glass panes incuding ISI marked M.S pressed butt hinges bright finished of required size with neccessary screws 35 mm thick of 2nd class D/wood 8 Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.1 Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) 9 Providing corrugated G.S sheets roofing includingvertical/curved surface fixed with polymer coated J or L hooks ,bolts and nuts 8 mm dia with bitumen and G.I limpet washers or with G.I limpet wshers filled with white lead ncluding a coat of approved steel primer and two coats of approved paint onoverlapping of sheets complete upto any pitch 0.50 mm thick with zinc coating not less than 275 gms/sqm 10 Providing ridges or hips of width 60 cm overall width in plain G.S sheets fixed with polymer coated J or L hooks bolts and nuts 8 mm dia G.I limpet and bitumen washers complete .80 mm thick with zinc coating not less than 275 gms /sqm 11 providing and fixing hard board ceiling sheet of approved quality with neccesary nails etc frame work to be paid seperately standard quality 12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 Size of tile 500x500 mm 13 Applying priming coat withready mixed pink or grey primer of approved brand and manufacturer to give an even shade on wood work hard and soft wood 14 Paintingwith synthetic enamel Paint of approve brand and manufacturer two or more coats on new work 15 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade 16 Finishing walls with water proofing cement paint of required shade.New work (two or more coats applied @ 3.84 kgs /sqm 17 Providing and fixing aluminium handles ISI marked anodised transparent or dyed to reqd colour and shade withneccesary screws etc complete 125 mm size 18 Providing and fixing aluminium handles ISI marked anodised transparent or dyed to reqd colour and shade withneccesary screws etc complete 100 mm size 19 Providing and fixing aluminium sliding door bolts ISI marked anodised transparent or dyed to reqd shade and colour 20 Providing and fixing aluminium tower bolts ISI marked anodised transparent or dyed to reqd colour and shade with neccesary screws 300x10 mm 21 Providing and fixing aluminium tower bolts ISI marked anodised transparent or dyed to reqd colour and shade with neccesary screws 150x10 mm 22 Carriage of sand 23 Carriage of Bajri 24 Add cost of CIB

INR 600 /-

INR 3000.0 /-

INR 1.50 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB