Tender For Misc Repair/ Painting To Steel Furniture At Af Stn Adampur-- 1 CHAIR CB STEEL WITH ARMS (Drawing No. FD-75) 2 Seat made out of 1st class hard wood (Shesham) duly polished of French polish of any approved shadeandwoven with cane plastic 2 mm wide whiteof size 450 mm x 465 mmduly fixed withbolts, nuts and washers, IN REPLACEMENT, complete all as per drawing anddirected. 3 Seat made out of 1st class hard wood (Shesham) duly polished of French polish of any approved shadeandwoven with cane plastic 2 mm wide whiteof size 465 mm x 380 mmduly fixed withbolts, nuts and washers, IN REPLACEMENT, complete all as per drawing anddirected. 4 Hand rest made of Ist class hard wood duly (Shesham) polished in black colour, IN REPLACEMENT, complete all as per drawing anddirected. 5 PVC / hard rubber shoes, IN REPLACEMENT, complete all as specified and directed by Engineer-in-charge. 6 Preparation of steel surface of conduit pipe frame and applying one coat of olive green synthetic enamel paint as required complete. 7 Gas welding of conduit pipe all as specified and directed by Engineer-in-charge. 8 TABLE OFFICE CLERK STEEL (Drawing No. FD-84 & 1004) 9 Top made out of 18/19 mm prelaminated particle board, exterior grade of shape and size as per existing top with 6 mm thick teak wood beading all around duly French polished, IN REPLACEMENT, complete all as per drawing anddirected. 10 Legs made out of MS conduit pipe 25 mm dia or square pipeof1.6 mm thickness welded to frame and applyingspray painting with two coats of synthetic enamel paintover a coat of red oxide primer, IN REPLACEMENT, complete all as per drawing anddirected 11 Adjustment of drawers by denting etc. to make the same functional complete all as directed by Engg- in- Charge 12 Locks of drawer with best quality brass locks 6 levers with duplicate keys, IN REPLACEMENT,complete. 13 Complete removal of existing treatment of table office clerk steel, including preprationthe surface with puttyand applyingtwo coats of synthetic enamel paint with spray gun all as directed / approved by GE. 14 Gas welding of legs and stiffener all as specified and directed by Engineer-in-charge. 15 TABLE OFFICE OFFICERS STEEL (Drawing No. FD-1004) 16 Top made out of 18/19 mm block board, of shape and size (1680mm x 870mm)with 1 mm thick teak face plastic laminated sheet and PVC beading all around, IN REPLACEMENT, complete all as per drawing and as directed. 17 Applyingone coat olive green enamel paint with spray gun before fixing the top including preparation of surfaces complete all as directed. 18 ALMIRAH LARGE STEEL AND RACK STEEL (Drawing No. FD -1032) 19 Mild steel locking device includingMS Rod and applyingonecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as per drg and as directed. 20 Adjustment of existing shelves by tightening and replacing clamps of required nos complete all asdirectedby Engineer-in-Charge. 21 Hinges of door shutters of Almirah large steel size as per existing hingeas per drg, IN REPLACEMENT, complete. 22 Legs of Almirah steelmade outof 1 mm thick MS sheetto required shape and design and applying spray painting with onecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing andspecified. 23 Shelves made out of 1mm thick MS sheet to required shape and design and applyingspray painting onecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing andspecified. 24 Shutters made out of 1mm thick MS sheet to required shape and design and applyingspray painting onecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing andspecified. 25 Complete removal of existing treatment of Almirah, including preprationthe surface with puttyand applyingtwo coats of synthetic enamel paint with spray gun all as directed / approved by GE. 26 ALMIRAH MEDIUM STEEL AND RACK STEEL (Drawing No. FD -243 & FD/E6/MAP/18) 27 Mild steel locking device includingMS Rod and applyingonecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as per drg and as directed. 28 Adjustment of existing shelves by tightening and replacing clamps of required nos complete all asdirectedby Engineer-in-Charge. 29 Hinges of door shutters of Almirah large steel size as per existing hingeas per drg, IN REPLACEMENT, complete. 30 Legs of Almirah steelmade outof 1 mm thick MS sheetto required shape and design and applying spray painting with onecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing andspecified. 31 Shelves made out of 1mm thick MS sheet to required shape and design and applyingspray painting onecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing andspecified. 32 Shutters made out of 1mm thick MS sheet to required shape and design and applyingspray painting onecoat of synthetic enamel paint olive green colour over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing andspecified. 33 Complete removal of existing treatment of Almirah, including preprationthe surface with puttyand applyingtwo coats of synthetic enamel paint with spray gun all as directed / approved by GE. 34 TEAPOY VARANDAH(Drawing No-FD-255) 35 Top 18/19mm thick pre-laminated board of size 900mm x 450mm with 4mm thick teak wood edging all round, IN REPLACEMENT, complete all as per drawing and directed. 36 Gas welding of teapoy varandah at appropriate point all as specified and directed by Engineer-in-charge. 37 CHAIR VARANDAH(Drawing No-FD-266) 38 Removing old existing unserviceable cane from chairverandah and reweaving the same with new 4 mm wide plastic cane oval type, best quality, seat and back, including provision of rubber shoes to the legs, complete all as per drawing and directed. 39 PVC / Rubber shoe of chair varandah,IN REPLACEMENT, complete all as per drawing and directed. 40 Gas welding of broken legall as specified and directed by Engineer-in-charge. 41 TABLE FOR COMPUTER / CABINET 42 Table top of size 1200mm x 600mm, made of 18mm thick one side pre-laminated partical board, one side teak faced covered with 4mm PVC beading all around, IN REPLACEMENT, complete all as directed by Engg-In-Charge. 43 Drawer of table computer made out of 8mm thick ply board of size 100mm x 450mmIN REPLACEMENT, complete all as per drawing and directed. 44 CHAIR REVOLVING / COMPUTER ALL TYPE ( HIGH BACK / LOW BACK)/ CHAIR CAPSULE 45 Sheet of chair visitor / computer made out of learherite / raxin clothbest quality, including U foam cushionof 3 thickdensity , IN REPLACEMENT, as approved by GE. 46 Back sheet of chair visitor / computer made out of learherite / raxin clothbest quality, including U foam cushionof 2 thickdensity , IN REPLACEMENT, as approved by GE. 47 PVC wheel heavy duty, best quality for chair executive / revolving , IN REPLACEMENT, as approved by GE. 48 Hydraulic cylindrical, height adjustment type,best qualityIN REPLACEMENT, as approved by GE. 49 TABLE DINNING STEEL 900MM X 900MM X 760MM 50 Top 18/19mm thick medium density fibre board top covered with 1mm thick aluminum sheet duly plastic laminated of size 900mm x 900mm with 3mm thick PVCedging all around, IN REPLACEMENT, complete all as per drawing and directed. 51 Preparation of steel conduit pipeframe and applying one coat of olive green synthetic enamel paint before fixing the top as required complete. 52 Gas welding of broken leg and stiffener all as specified and directed by Engineer-in-charge. 53 TABLE STEEL WITH OR WITHOUT DRAWER(Drawing No. FD-1008) 54 Top of table 3x2 steel with or without drawer, 18/19mm thick block board with 1mm thick teak face plastic laminated sheet and PVC beading all around the top, IN REPLACEMENT, complete all as per drawing and directed. 55 Drawer & lock with duplicate keys , IN REPLACEMENT, as approved by GE. 56 Preparation of steel surfaceframe and applying one coat of olive green synthetic enamel paint before fixing the top as required complete. 57 Gas welding of broken leg and stiffener all as specified and directed by Engineer-in-charge. 58 CHAIR SCHOOL WITH HANDLE (Drawing No. FD-E06/MAP05) 59 PVC sheet, IN REPLACEMENT, complete all as per drawing and directed. 60 Writen hand board, IN REPLACEMENT, complete all as per drawing and directed. 61 LOCKER BED SIDE STEEL (Drawing No. FD-1029) 62 Complete removal of existing treatment of locker, including preprationthe surface with puttyand applyingtwo coats of synthetic enamel paint with spray gun all as directed / approved by GE. 63 CHAIR EXECUTIVE 64 PVC wheel heavy duty, best quality for chair executive IN REPLACEMENT, as approved by GE. 65 Handle / arm of chair,IN REPLACEMENT, as approved by GE. 66 Tapesty cloth not less than Rs. 300.00/- per meter duly stiched with fine standard thread and providing best qualitycomplete, IN REPLACEMENT, all as directed by Engg-In-Charge. 67 Ball bearing, IN REPLACEMENT, complete as approved by GE. 68 Legs with frame, IN REPLACEMENT, complete as approved by GE. 69 Sheet of chair executive made out of learherite / raxin clothbest quality, including U foam cushionof 3 thickdensity , IN REPLACEMENT, as approved by GE. 70 Back sheet of chair executive made out of learherite / raxin clothbest quality, including U foam cushionof 2 thickdensity , IN REPLACEMENT, as approved by GE. 71 CHARPOY GI PLYWOOD TOP / MS TUBING(Drawing No. FD-220 & FD/MAP-11/01) 72 Stiffeners made out of flat iron 40x5mm thick, (Approx 1 metre length) with & including nuts and bolts not less than 8mm dia including drilling holes & applying one coat synthetic enamel paint with spray gun, IN REPLACEMENT,complete all as per drawing and as directed. 73 Plywood top with new plywood top12 mm thick, 7 ply, BWR grade type BB with beading all round approx size 2.00 m x 1.00 m for charpoy GI pipe fixed with min four nos flat headed nut and bolts not less than 6 mm dia fixed with stiffener including drilling holes, IN REPLACEMENT, complete all as per drawing and as directed. 74 Check nut not less than 32mm dia IN REPLACEMENT, complete all as directed by Engg-In-Charge. 75 GI elbow not less than 32mm dia IN REPLACEMENT, complete all as directed by Engg-In-Charge. 76 CHARPOY GIPIPE NYLON NEWAR(Drawing No. FD-220) 77 Dismantling / taking down / cutting of existing unserviceable newar from GI pipe charpoy and reweaving with and including superior quality nylon newar 50 mm to 55 mm wide white colour of weight not less than 1.50 Kg per charpoy and shall be closely woven both ways(both top and bottom layer of charpoy) including tightening the elbows etc in the true position complete all as specified and shown on drawing, 78 RACK SHOE STEEL(Drawing No. FD/E6/MAP/02 (R)) 79 Partion of shoe rack made out of 3mm dia MS rod (Approx size 300mm x 900mm), with powder coated balck colour,IN REPLACEMENT, complete as shown on drawing &directed. 80 Misc repair / maintence door to door of old tables, chair, beds, partitions and easing of chairs and beds and all defective items such as knobs, handles, all type of lock and other hardware fitting and fixture, as per site requirement with and includingmaterial like screws, nails, wahers, grease and all kind of machine work i.e welding, cutting, bending, drilling & grinding.NOTE:-The work under the subject tender is to attend day to day complaints of occupant/users. Contractor should have all categories of workman to attend the same within stipulated time as directed by Engineer-in-charge. If any complaint is not attended within 6 (six) Hours from time of complaint given to contractor penalty of rupees 100/ for each complaint shall be made for not attending the complaint in time. Contactor with mobile number and Mail idor his rep shall liaisons with BSO office every day at 9.00 AM & 2.00 PM i.e two time every day in office of BSO to know or collect the day to day work/complaints.
