Tender For Electrical Works, Electrical Work Under Bp 2024-25 At Edd Lalganj, Name of Work: SCHEDULE OF RATES & QUANTUM OF WORKS FOR (1) MAINTENANCE WORK BODY AND NEUTRAL EARTHING OF 25KVA & 63 KVA T/F (295 NOS.) INSTALLED AT DIFFERENT PLACES IN GEOGRAPHICAL AREA OF EDD-LALGANJ DUE TO PROTECTION OF TRANSFORMERS, LOCATION/PLACE/AREA AND VILLAGE LIST AS PER ESTIMATE (2) EARTHING WORK FOR PROTECTION OF 100 KVA & 250 KVA T/F (TOTAL-40 NOs.) INSTALLED AT DIFFERENT PLACES IN THE GEOGRAPHICAL AREA UNDER EDD LALGANJ, LOCATION/PLACE/AREA AND VILLAGE LIST AS PER ESTIMATE. (3) INSTALLATION OF NEW 250 KVA T/F AT SANT NAGAR LALGANJ (4) INCREASING CAPACITY OF T/F FORM 10 KVA TO 63 KVA AT THE VILLAGE PANDIT KA PURWA UNDER EDD LALGANJ UNDER BUSINESS PLAN-2024-25, IN JURISDUCTION OF EXECUTIVE ENGINEER, ELECTRICITY DISTRIBUTION DIVISION-LALGANJ, RAEBARELI. CORTAGE OF STOR ITEMS FROM ESC TRIPULA RAEBARELI TO DUMP SITE AND DUMP SITE TO WORK SITE ALONGWITH LOADING UNLOADING AND PROPER STACKING:- ST Pole 11 Mtr Long PCC Pole 8.5 Mtr Long 63 KVA T/F 250 KVA T/F CABLE LT ABC (3x50 + 1x35+ 1x16) SQMM. CABLE ABC (3x95+1x70+ 1x16) SQMM. PVC Cable Alluminium (3.5X70 sqmm) L T PVC Cable Alluminium (3.5X150/70 sqmm) ACSR Weasel Conductior Stay Set Complete (16X1800) mm. With Stay Rod /Clamp/Bolt & Nut Earthing Complete with Earthing ROD/ 6SWG Earthing Wire S.S. T/F Base Angle/fuse Set 11 KV Composit Pin Insulators With Pins & Nuts Bolt 11 KV Composit Disc Insulators 4500 Kg T&C with Fitting T OFF Channel (125X65X2240 MM) Top Channel (100X50X2028 MM) Top Channel (125X65X2240 MM) Dropper Channel (125X65X2240 MM) Dropper Channel (100X50X2028 MM) Dropper Channel Angle LT Distribution Box (L.T.D.B.) Three Phase Earthing Complete OF T/F Body & Neutral of 25 KVA & 63 KVA T/F by M.S. Earthing Rod of (20X2500 MM & 6 SWG EARTHING WIRE. Etc. ERRECTION & LABOUR CHARGES:- Digging of Pits then Errection of ST/PCC Poles alongwith all required accesories as per RESPO norms. Grouting of ST/PCC Pole with grouting materials as per RESPO norms. Earthing of ST /PCC Pols, as required, as per RESPO norms. Work for Earthing Complete OF T/F Body & Neutral of 25 KVA & 63 KVA T/F by M.S. Earthing Rod of (20X2500 MM & 6 SWG EARTHING WIRE. Etc. Work for dismanteling of 16 KVA T/F on single Pole/Double Pole then Carriage of T/F from Work site to ESC Tripula alongwith loading unloading. Errection/Re-errection of double pole/ Four Pole Structure by.PCC/ST Pole alongwith all accessories, then grouting of Pole with grouting materials including fitting of all accessories items, as per RESPO Norms. Mounting of 63 KVA T/F on New Constructed D/Pole/Four Pole Structure alongwith fitting of all related accessories, with earthing of T/F body & neutral As per RESPO norms. Work for M.S. Earthing of Transformer by M.S. Earthing Rod of 20X2500 mm and 6 SWG earthing wire with etc, alongwith required materials, as per RESPO norms. The work for Earthing, Fensing and excavation of new Plinth size 2.00X2.00X1.50 for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 250 KVA T/Fs on Plinth alongwith fitting of all accessories, as per RESPO Norms. Labour Charges for earthing of 250 KVA 11/0.4 KV Power Transformers- (01 Nos) for digging of 60 fit Borewell type pit (1.5-inch diameter) to install 60 fit long M.S. Pipe (60 fit long) with 1.5-inch diameter work followed by connection of M.S. Stirp 50X6 mm size for Suitable length to G.I. Pipe through proper welding ( Aluminium paint covering of welded joint) with tightening of nuts & bolts and fitting of spaces by homogeneous mixture of coke & sault against medium power transformer body and neutral earthing these includes connection of M.S Strip fot sepret common pit as there will be one pit of each earthing, Asm per RESPO Norms. All required material will be provided by contractor. Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, All required material will be provided by contractor. Digging of Pits, fixing Nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms Work for Installation/fixing/Tightening of Earth Wire Thimble LUG, Material Provided By the Contractor. Laying , stringing & sagging of ACSR Weasal Conductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required. Laying , stringing & Fixing of LT AB Cable (3X50+(1x35)+(1x16) sq.mm . as per above details. Laying , stringing & Fixing of LT ABC Cable (3.95+1X70+1x16 sqmm). as per above details. Laying , stringing & Fixing of LT PVC Cable AL. (3.5X150/70 sqmm). as per above details. Making/Fixing/Installation of 11 KV Disc Insulators T&C Type 4500 Kg with Fittings Making/Fixing/Installation of 11 KV Composit Pin Isulators with Pin. Making/Fixing/Installation of S.S. T/F Base Angle Work for Installation/fixing of Top Channel. Work for Installation/fixing of T OFF Channel with Clamp & Nuts & Bolt Making/Fixing/Installation of Dropper Channel Making/Fixing/Installation of Dropper Angle Making/Fixing/Installation of L.T.D.B. Three Phase Making/Fixing/Installation of Holding Clamp for PCC/ST Poles With Nuts & Bolt, Material Provided by Contractor Work for Installation/fixing of Stone Pad 300X300X75 , Material Provided by Contractor Work for Installation/fixing of V Type X-Arms , Material Provided by Contractor Work for Tightening/fixing of Fuse Set as required, Material Provided by Contractor Work for Tightening/fixing of Fuse Wire 20 SWG/18 SWG/16 SWG, Material Provided by Contractor Work for Tightening/fixing of Fuse Wire 30 SWG/28 SWG/26 SWG, Material Provided by Contractor Work for Making/ Installation Shackel Insulators for LT ABC, Material Proided by Contractor. Work for tightening of Nuts & Bolt with Washer, Material Provided by Contractor Work for Installation/fixing of L.T.M.S. Clamp for PCC Pols with Nuts & Bolt, Material Proided by Contractor. Work for Installation/fixing of EYE Hook for LT ABC, Material Provided by Contractor Work for Installation/fixing of LT CRIMPING Thimble lug 240 sq.mm, Material Provided by Contractor Work for Installation/fixing of Wooden Board in size (48X24X1.5), Material Provided by Contractor Work for Installation/fixing of Copper Clamp (thickness of 5mm, Length 300 mm), Material Provided by Contractor
