Tender for construction work of 28/30 VIP/Steamy Building, Public Works Department, Drummond Road, Prayagraj campus, external cable, panel work, lift, DG set and other electrical materials etc., electric work, 1 External Panel and cable work etc. 2 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCBs (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only. Panel board for incoming 1250 Amp/415 volt ACB-1 No,outgoing 400 Amp. TPN MCCB-3 Nos. &200 amp MCCB-1 noCAT B cubical type. [DSR No. 22.2.3 g (ii)] 3 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Panel board for incoming 100Amp TPN MCCB 1No., outgoing 63Amp. TPN MCCB- 2No.cat B cubical type. [DSR No. 22.1.1a (ii)] 4 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Panel board for incoming 200Amp TPN MCCB 1No., outgoing 63Amp. TPN MCCB- 3No.cat B cubical type. [DSR No. 22.1.2b (ii)] 5 Supplying, installing on wall, testing and commisssioning of following capacity Air insulatedCompact Type Rising mains for use on 3 phase 4 wire 415 volts. 50Hz A.C. Supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6 mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos alluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every metre, continuous earting with 2 Nos aluminium strip of suitable size (one on each side) including G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. 400 A. Isc = 30kA for 1 second [DSR No. 3.8.3] 6 Supply & erection of 125 amp TPN tap off box with MCCB 4P 36 KA L.T. cubical type wall mounted tapbox in 16 guage sheet,front door openable,powder coated paint in siemens grey olor,dust & vermin proof on rising mains completein all respect. 7 Supply & erection of incoming adoptor box for mounting with 400 amp TPN MCCB 36 KA 4P including connectors of required capacity on to be the rising mains complete in all respect. For AC 8 Supply and laying of 400 sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [DSR No. 20a.1.20] 9 Supply and laying of 400 sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC/HUME/METAL PIPE or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [DSR No. 20b.1.20] 10 Supply and laying of 150 sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [DSR No. 20a.1.16] 11 Supply and laying of 70 sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade on wall surface asdirected by engineer in charge complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [DSR No. 20c.1.13] 12 Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [DSR No. 20a.1.9] 13 Supply and laying of 10 sqmm 2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [DSR No. 20a.1.2] 14 S/making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed aluminium conductor cable of 1.1 kv grade of 3.5x400 sqmm(82 mm). [DSR No. 9.1.31] 15 S/making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed aluminium conductor cable of 1.1 kv grade of 3.5x150 sqmm(50 mm). [DSR No. 9.1.26] 16 S/making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed aluminium conductor cable of 1.1 kv grade of 3.5x70 sqmm(38 mm). [DSR No. 9.1.23] 17 S/making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed aluminium conductor cable of 1.1 kv grade of 4x16 sqmm(28 mm). [DSR No. 9.1.33] 18 S/making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed aluminium conductor cable of 1.1 kv grade of 2x10 sqmm(19 mm). [DSR No. 9.1.2] 19 S/L of 1800x900x12 mm thick chequered rubber matting of tested quality. 20 Earthing with GI earth plate 600mx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrvlong etc with charcol and salt s required. [DSR No. 5.4] 21 Supply and laying of 25mm x 5mm G.I. strip from earth electrode directly in the ground as required complete in all respect. [DSR No. 5.15] 22 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.make-cease fire or equivalent. 23 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.make-cease fire or equivalent. 24 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/ UV stabilized PC Cover and lenses built with mandatory driver set suitable for 100 to 120 Watt. Confirming to IP 66 and IK 07 and above protection complete in all respect.12000-14400 system lumens, High power LED with lenses, >120 Lm/W, P.F.>0.95, THD <10% at full load, CRI >70, Potted driverCAT-AAA Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee [DSR No. 23.24] 25 S/F of decorative 40 to 45 watt LED post top indirect lightluminaire having pressure die cast aluminium body and UV stablized PC clear/frosted glas cover ,with driver set ,confirming to IP 66 and IK 08 ,potted driver (not circuitory) complete in all respect. catAAA 4800-5400 system lumens ,120 lm/w PF>0.95,THD<10%,at full load ,CRI>70,>300 V over voltage protection,auto restart feature,4 KV internal surge protection, with 5 years warrantee. [DSR No. 23.21] 26 Suppiy and fixing of LED Sreet light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stabil zed PC Cover and lenses suitable for 110 to 130 Watt and Confiming to IP 66, and IK07 and above protection having |Company LOGO Engraved complete in all respect including Labour.|13200-15600 system lumens, High Power LED with lenses, > 120lm/w, PF>0.95, THD <10% at full load, CRI > 70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee [DSR No. 23.17] 27 Suppiy and fixing of LED Sreet light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stabil zed PC Cover and lenses suitable for 60 to 72 Watt and Confiming to IP 66, and IK07 and above protection having |Company LOGO Engraved complete in all respect including Labour.7200-8640 system lumens, High Power LED with lenses, > 120lm/w, PF>0.95, THD <10% at full load, CRI > 70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee [DSR No. 23.15] 28 S/F of decorative 8 to 16 watt LED bollard luminaire with base plate made of powder coated die cast aluminium and extruded al. housing with UV stablized PC diffuser,SMD LEDs,Electronic driver set ,confirming to IP 65/66 and IK 07 and above protection,600-800 mm height complete in all respect.with driver set confirming to IP65 protection complete in all respect.catAAA 960-1920 system lumens ,120 lm/w PF>0.95,THD<10%,at full load ,>300 V over voltage protection,4 KV internal surge protection, with 5 years warrantee. [DSR No. 23.2] 29 ISupply and fixing of IP 20, Front Lit, Mid Power SMD type LED|Light, recess Surface mounting round 6 Watt to 9 Watt, Cut out Min 125 mm, Height Min 40 mm,, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, High purity / transmi_ivity UV Stabilized Non yellowish diffuser/Reflector for uniform light distribution, detachable driver set,suitable for 24 Hr Continuous Operation, Complete in All respect.220-1080 systen lumens, >l20 Lm/W, PF>0.95, THD <10% at CAT-AAA full load, CRI >80, ,>300V over voltage prolection, 2.5 KV internal Surge Proteclion, with 5 years warranlee. [DSR No. 23.01] 30 ISupply and fixing of IP 20, Front Lit, Mid Power SMD type LED|Light, recess Surface mounting round 10 Watt to 15 Watt, Cut out Min 125 mm, Height Min 40 mm,, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, High purity / transmi_ivity UV Stabilized Non yellowish diffuser/Reflector for uniform light distribution, detachable driver set,suitable for 24 Hr Continuous Operation, Complete in All respect.1200-1800 systen lumens, >l20 Lm/W, PF>0.95, THD <10% at CAT-AAA full load, CRI >80, ,>300V over voltage prolection, 2.5 KV internal Surge Proteclion, with 5 years warranlee. [DSR No. 23.02] 31 S/F of LED Highbay light,100 watt,150 lm/w,model-By515P LED 100S 5700 NB S1 PSU GR,make-Philips/Havells/polycab 32 S/F of Orphee pole with with LEDdecorative post top Emperor fixture,60 Watt LED Fitting,3760 mm height,6000-6500 system lumens,120 lm/w,PF>0.95,THD<10%,at full load,CRI>70,>300 V,over voltage protection and auto start feature,4 kv internal surge protection,with 5 yera warrantee.Make-Twinkle luminaries/philips/Havells. 33 S/F of V3 wall fan silvar black 450 mm sweep,make Havells or Equivalent 34 S/F of 7 watt LED adjustable spot COB light,ceiling cutout dia 81mm,height 50 mm,new generation,energy saving,recessed mounted down light pressure die-cast aluminium heat sink & high efficiency long life COB LED with high efficacy of 630 systemlumen,Philips make,or equivalent. 35 S/F of strip lights 55 watt 1000lm/mtr,264 LED/MTR,4K,CRI>80,5 mtr,model- Pro glow nxt & slim edge profile strip,Make-Philips or quivalent 36 S/F of G.I.Pipe 4 B class per mtr Jindal make. 37 S/F of 1000 amp 4pole on load manual changeover switch Disconnector in sheet steel enclosure ,make-L&T withcable entry box cubical type enclosure in 16 guage sheet powder coated paint in siemens grey color dust & vermin proof for proper connection of cable with gland both upper & lower side. 38 cable entry box cubical type enclosure in 16 guage sheet powder coated paint in siemens grey color dust & vermin proof for proper connection of cable with gland both upper & lower side.for 1000 amp 4 pole change over switch. 39 Supply and fixing of 7 mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 130 mm & Base plate 12 mm thick)having 3mm, thickness with single arm bracket length of 1 mtr. length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect [DSR No. 21.2] 40 Earthing with ccopper earth plate 600mx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrvlong etc with charcol and salt s required..(For Lighting arrester) [DSR No. 5.6] 41 Supply and fixing of vertical air termination final ,made of 25 mm dia 300mm long,G.I.tube,having single prong at top,with 85 mm dia 6 mm thick G.I. base plate including holes etc,complete in all respect. [DSR No. 6.2] 42 Fixing of lightning conductor finial(single prong) with base plate including holes etc. complete as required. [DSR No. 6.3] 43 Jointing copper/ GI tape (with another copper/GI tape,base of the finial or any other metallic object) by riveting/nut bolting/sweating and soldering etc as required. [DSR No. 6.4] 44 Providing and laying GI tape 32x6 mm from earth electrode directly in ground as required. [DSR No. 6.14] 45 Lift Work 46 FULLY AUTOMATIC GEARLESS ELEVATOR(MRL) 47 PRODUCT TYPE :- Fully Automatic MRL Elevator 48 CAPACITY (kgs) :- 1020 Kg, 15 persons. 49 SPEED (mps) :- 1.0 M/S 50 NO. OF STOPS/ENTRANCE :- 4/4(G,1,2,3) 51 MAIN STOP :-1(G) 52 TRAVEL HEIGHT :- 13.5 M 53 MACHIN ROOM :-MRL 54 HEADROOM :- 4500 MM 55 PIT DEPTH :- 1500 MM 56 SHAFT DIMENSION(WXD) :- 2450 MMX2400 MM 57 SHAFT WALL :- CONCERETE FLOORS+BRICKS 58 CAR DIMENSION WXDXH :- 1600mmx1500mmx2200mm 59 CAR DOOR SIZE WXH :- 1000mmx2100mm 60 CAR DOOR TYPE :- DOOR CENTER OPENING,2 PANEL 61 Landing door fire protection classification :- EN81-58 E120(Two hours fire rated) 62 Car access sides :-1 63 Door Drive :- Varidor 15 64 Drive & control :- Simplex Full collective control 65 DRIVE POWER/MAIN POWER SUPPLY :- 7.8 KW,415 V,50HZ 66 FREE MAINTENANCE PERIOD :- 36 MONTH 67 INVERTER TYPE :- VAF0XX REGEN 68 MACHINE TYPE :- Permanent magnet 69 Communication option selected :- Pesseger release alt.landing,Intercom Tai1,3 ays,Provision for CCTV interface,Remote monitoring device,Alarm by horn in hoistway 70 Control option selected :- ARD 71 Car lighting :- LED 72 Car Front Finish :- Stainless steel AISI304 moonrock front cathedral 73 Machine Position:- PMGM machine Placed above Hoistway in Machine room 74 Make :-OTIS/ SCHINDLER/Mitshubishi 75 Inverter work 76 Supply & Fixing of 12V,150 AH inva master BATTERY, IMTT150 MAKE- Exide. 77 Supply & Fixing of inverter model- HX00- Exide 1450 24V 1450VA, Exide make. 78 Supply/Fixing of Trolly for Double Battery. 79 D.G.Work 80 SITC of 400KVA 3 Phase,silent type DG sets,AMF panel,bus ducting/cables from DG sets to essential panel ,DG set enclosure room sound insulation/ventilation/smoke exhaust as required,earthing of DG set system,control cabling,fuel tank/piping,DG set exhaust piping/exhaust chimney as per CPCB IV norms,civil works connected with DG sets including foundation as required.Make-Cummins,Kirloskar. [P.S. No. 6.3.1] 81 Other Electrical Equipments 82 S/F of 213 Nos, 1200 mm fan with fan motor of AC permanent insulation,capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment.the rated voltage 220/240 volt 50 hz,1 ph AC fan should consist of down rod blades ,shackle canopies etc and with double ball bearing system.. Ceiling fan ,1200 mm/900 mm, @ 2095.00,DSR No.19.1 83 S/F of 27 No. Fresh air fan 250 mm,non-metallic ,Model No-Ventil air fan Dx/DX-HS,Make-Havells or equivalent @ Rs.2030.00 84 S/Fof 13 No.S/F of Fresh air fan 300 mm ,metallic ,Model No-Ventil airfan DSP,Make-Havells or equivalent @ Rs.2265.00 85 S/F of 7 No. Heavy duty Ex. fan 380 mm ,1400 RPM ,Model-Turbo Force TP,Make-Havells or equivalen @ Rs.6220.00 86 S/F of 35Nos.of geyser/storage water heater 25 lit puro turbo Ex Havells makeor equivalent @ Rs.14990.00 87 S/F of 68 Nos. Fancy Table Lamp Model No-581877,E27,1X40 watt ,make-Philipsor equivalent @ Rs.4070.00 88 S/F of 4 No.Fancy Naica chandelier-ceiling, Model No-581964,E14,7X40 watt ,make-Philipsor equivalent @ Rs.50040.00
