Tender For Rather Check Road Including Other Links - Supply And Laying Of Rcc Spun Pipes Of Different Dia As Per Requirement At Site, Including Earth Cutting , Laying Of Cushion Over Pipes And Laying Of Pipes In Proper Grade Complete As Per Direction Of E, Anantnag-Jammu And Kashmir

Rather Check Road Including Other Links - Supply and laying of RCC spun pipes of different dia as per requirement at site, including earth cutting , laying of cushion over pipes and laying of pipes in proper grade complete as per direction of engineer incharge including cost of pipes and carriage from source to site all job complete : 300mm dia 2 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). 3 Providing and layingwet mix macadam(Size range 53mm to 0.075mm) including premixing the material with water at OMC in mechanical mix plant, transporting the mixed material by mechanical transport from plant to site of work and laid with paver finisher compacting with vibratory road roller of 8-10 Ton capacity to achieve the required density as per specification and includingcost and carriage of the materials complete jobcomplete 4 Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom.On bituminous surface @ 0.25 Kg/sqm. 5 Providing and laying 50mm thick bituminous macadam using crushed stone aggegate of quaility size and grading as specified in CPWD specification and straight run bituminous of grade 80/100, 3.5% by weight of total mix including hot mixing of stone aggregate, Evotherm and bituminous hot mix plant transporting mixed material upto site of work and laid with paver finisher and compacting with road roller of 8 to 10 tonne capacity to achieve the density , including carriage all job complete 6 Providing and laying of 25mm thick Semi Dense asphaltic base course using mineral aggregate satisfying the gradation set out in specifications with 5% binder content by weight of total mix with the aid of hot mix plant and paver finisher including rolling wit road roller of 8 to 10 tonne capacity to achieve the required compaction and density25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix), lime filler @ 2% (percentage by weight of Aggregate) and EVotherm prepared in Drum Type Hot Mix Plant of 60-90 TPH Capacity 7 Providing and laying of 6mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all carriages complete job. 8 Supplying and filling of RBM/Khak bajree /quarrymuckin Berm/Shoulder Fillingincluding carriage spreading , consolidation loading , unloading all complete job 9 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : 10 P/L dry stone soling hand packed tightly including all crriages involved complete job 11 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size including all carriages 12 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size 13 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding Thermo-Mechanically Treated bars of grade Fe-500D or more all complete upto plinth level 14 Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns etc. for mass concrete 15 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded 16 The estimated rates are exclusive of 18% GST. However the GST @18% shall be paid on gross amount excluding labour cess proportionately.

INR 800 /-

INR 32136.0 /-

INR 16.06 Lakhs /-