Tender For Renovation Work From Km 3.424 To Km 4.647 Of Rajwaha Goharni. 1 Water Bound Macadam Grading -2 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform, shamli-Uttar Pradesh

Tender For Renovation Work From Km 3.424 To Km 4.647 Of Rajwaha Goharni. 1 Water Bound Macadam Grading -2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. 2 Water Bound Macadam Grading (Levelling coat)Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. 3 Providing and applying primer coat with bitumen emulsion slow setting on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. 4 Providing and applying tack coat withBitumen VG-10 using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared bitumenous/granular surface cleaned with mechanical broom. 5 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheele 80-100KN static roller capacity, finished to required level and grades complete all specified in technical specification clause 508 and as directed by the Engineer in charge. 6 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C seal coat. 7 Brick linning on both side of the road of M-150 bricks 7 cm wide 11 cm deep, laid with mud morter including labour and supply of brick finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in- charge. 8 Earth work in filling with lift upto 1.5 m and lead upto 200m remming,dressing and manual compection etc complete.

INR 944 /-

INR 300000.0 /-

Refer document