Tender For The Interior, Electrical, Networking And Other Related Works At Thiruvananthapuram , E-Tender For The Interior, Electrical, Networkingand Other Related Works At Thiruvananthapuram For More Details Refer Tender Documents. , Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Lixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Materialwith In 50 Metres Lead As Directed By Engineer - In-Charge , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Upstandard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls : 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately):For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately)Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5.50 Mm Thickness , Aluminium Work For Doors, Windows, Ventilators And Partitions With Already Dismanlted Suitbale Aluminium Sections Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately) , Fixing Of Shutters Of Doors, Windows & Ventilators Using Already Dismantled Aluminum Sections Including Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately) , Fixing Of Already Dismantled Prelaminated Particle Board In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge , Fixing Already Dismantled Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge , Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Tubular Handle Bar 32 Mm Outer Dia, 3.0Mm Thick & 2100 Mm Long With S.S. Screws Etc. Complete As Per Direction Of Engineer -In-Charge.Powder Coated Minimum Thickness 50 Micron Aluminium Tubular Handle Bar , Providing And Fixing 100 Mm Brass Locks ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:300X10 Mm , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Single Rubber Stopper , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Single Rubber Stopper , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufactureto Give An Even Shade:One Or More Coats On Old Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Ofrequired Colour To Give An Even Shade :One Or More Coats On Old Work , Setting Up Partition Using Plywood Frames And Panelling Using Plywood And The Surface Covered Using Mica Laminiation Sheets Of Approved Colour And Design. Width 10Cm And Heigth 90Cm. , Acp Counter Board Hung Using Gi Metal Hanging , Acrylic Desingation Holder - A4 Size - For Counters , Acrylic Designation Holder - 20Cmx10cm - For Counters , Acrlic Board Ecosolvent Printing , Main Board - Acp - With Vinysl Stickering , Supply And Fixing Of Cooling Film Stickers , Vinyl Sticker Logo , Electrical [26.01 - 50.01] Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcbirccb/Isolator6 Way, Double Door , Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcbirccb/Isolator12way, Double Door , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps , Supply And Installation Of Db Mounting Type Change Over Switch As Per Directions Of The Engineer In Charge. 40A , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63 Amps , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2x 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Sub Main Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Steel Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire , Wiring For Circuit/ Sub Main Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Steel Conduit As Required2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5/6 Amps Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5/6 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15/16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Telephone Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Bell Push , Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.1 Or 2 Module , Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.3 Module , Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.6 Module , Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface , Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )3 Module Moulded Plastic Box On Surface , Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )6 Module Moulded Plastic Box On Surface , Dismantling Of Ceiling Fan And Painting The Same With With One Or More Coats Of Spray Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade, Including Cleaning Of Surface With Detergent And Replacing The Damaged Rubber Reel, Nuts And Bolts With Washers And Safety Pins Reinstalling The Same As Required. , Supply And Fixing Of Anchor Bolt With Sealent Compound For Fixing Of Fans , Supply And Installation Tube Light Extension Pipe Using Gi Pipe , Supply And Installation Of Led Tube Light , Networking [51.01 - 55.01] Supply Conveyance , Installation , Testing And Commissioning Of 24 Port Fully Loaded Patch Panel Of Standard Make As , Cat6 Networking Copper Cable 300 Mhz Unshielded Twisted Pair Confirming Tia / Eia 568 Category 6 Cabling System With Reference Standards - Ul Subject 444, Eiaitia-568 B.2.1, Iso/Iec 11801 & Iec61156 With Pvc Conduits Of Appropriate Sizes And Appropriates Runs Through Conduits, Conforming To Is 9537/1983 With All Accessories Duly Clamped/Concealed ,Spacing Not Exceeding 50Cms And Clamps / Screws At A Distance Of 30Cm From Each Accessory Including All Labour Charges Complete. Make Dlink Or Equivalent , Supply And Installation Of Dual Information I/O Outlet Keystone Fixed On Faceplate And Fixed On Pvc Surface Mount Box. Make Dlink Or Equivalent , Supply Installation, Testing, And Commissioning Of A 2-Meter Patch Cord With Rj45 To Rj45 Cat6 Networking Cable Of Standard Make As Approved By The Site Engineer In Charge , Supply And Fixing 50 X 50 Mm Pvc Cable Management System With Base And Lid Along With The Following Accessories Conforming To Iec 61084/ Bs 476 & 4678 On Surface / Recess Including Cutting The Wall And Making Good The Damages In Case Of Recessed Installation As Required.50X50mm Cable Management System With Base
