|
| 1 | Dismantling and taking out the existing old unserviceable compressor hermetically/rotary sealed unit of any make from window type AC and S&F New compressor suitable for window AC of capacity 1.5 Ton complete all as specified and directed. |
| 2 | Same as per item No.1 here in beforebut compressorsuitable for window AC ofcapacity2.0 Ton complete all as specified and directed. |
| 3 | Dismantling and taking out the existing old unserviceable compressor hermetically/rotarysealed unit of any make from split type AC and S&F New compressor suitable forSplitAC of capacity 1.5 Ton complete all as specified and directed. |
| 4 | Same as per item No. 3 here in beforebut compressorsuitable for Split AC ofcapacity2.0 Ton complete all as specified and directed. |
| 5 | M&Lfor testing leakage in system Split/Window type Air conditioner of 1.5 ton capacity by injecting nitrogen gas upto 300 PSi, repairing leaking spots/joints with gas welding including supply & fixing of filter pencil type copper (in renewal), cleaning & flushing out complete system with gas, making the system leak proof, vaccumising the system complete all as specified and directed. |
| 6 | Same as per item No 5 here-in-beforebut Air conditioner of 2 to 3 ton capacitycomplete all as specified and directed. |
| 7 | M&L for servicing of Air conditioning of any capacity including air Filter Cleaning, Condenser and Evaporator coil Cleaning, insulation of tubing with expanded polythene foam insulation tubing and making necessary connection including M&L for unplastiised PVC pipe medium duly 20 mm dia for draining out condensed water complete all as specified and directed.Note:- Item Serial No. 1.00 to 7.00(i) Petty stores such as insulation tape, screws, small pieces of wires, plug top etc shall be provided by the Contractor without any extra cost to the department complete all as specified and directed. (ii) Spare parts alongwith Refrigerant gas shall be measured and paid separately there rate above Rs. 100/- |
| 8 | The following items supply only :- |
| 9 | Starting capacitor of capacity 80/100 MFD |
| 10 | Starting capacitor of capacity 100/120 MFD |
| 11 | Condenser capacity of5/6 MFD |
| 12 | Condenser capacity of10 MFD |
| 13 | Condenser capacity of36 MFD |
| 14 | Condenser capacity of45 MFD |
| 15 | Condenser capacity of50 MFD |
| 16 | Condenser capacity of55 MFD |
| 17 | Heating Coil suitable for 1.5 Ton Capacity Window AC |
| 18 | Heating Coil suitable for 2.0Ton Capacity Window AC |
| 19 | Heating Coil suitable for 1.5 Ton Capacity Split AC |
| 20 | Heating Coil suitable for 2.0 Ton Capacity Split AC |
| 21 | Cooling Coil suitable for 1.5 Ton Capacity Window AC |
| 22 | Cooling Coil suitable for 2.0Ton Capacity Window AC |
| 23 | Cooling Coil suitable for 1.5 Ton Capacity Split AC |
| 24 | Cooling Coil suitable for 2.0 Ton Capacity Split AC |
| 25 | Swing motor suitable for 1.5 Ton Capacity Window type Air Conditioner |
| 26 | Swing motor suitable for 2.0 Ton Capacity Window type Air Conditioner |
| 27 | Swing motor suitable for 1.5 Ton Capacity Split type Air Conditioner |
| 28 | Swing motor suitable for 2.0 Ton Capacity Split type Air Conditioner |
| 29 | Over load relay suitable for 1.5/2.0 Ton Window type AC |
| 30 | Over load relay suitable for 1.5/2.0 Ton Split type AC |
| 31 | Electric blower motor suitable for 1.5 Ton Capacity Window type AC |
| 32 | Electric blower motor suitable for 2.0 Ton Capacity Window type AC |
| 33 | Electric blower motor suitable for1.5 Ton Split AC (Evaporator/Condenser) |
| 34 | Electric blower motor suitable for2.0 Ton Split AC (Evaporator/Condenser) |
| 35 | Blower motor fan blade suitable for 1.5/2.0 Windowtype AC |
| 36 | Blower motor fan blade suitable for 1.5/2.0 Split type AC |
| 37 | Condenser motor with fan blade suitable for 1.5 Ton capacity Window type AC |
| 38 | Condenser motor with fan blade suitable for 2.0Ton capacity Window type AC |
| 39 | Condenser motor with fan blade suitable for 1.5 Ton capacity Split type AC |
| 40 | Condenser motor with fan blade suitable for 2.0 Suitable for Split type AC |
| 41 | Air Filter Suitable for1.5/2.0 Ton Capacity Window/Split type Air conditioner |
| 42 | Capillary tube length as per existing size suitable for 1.5/2.0 Ton Capacity Air conditioner |
| 43 | PCB Circuit with remote control suitable for any make and capacity of 1.5/2.0 Ton Window type AC |
| 44 | PCB Circuit with remote control suitable for any make and Capacity of 1.5/2.0 split type capacity Air Conditioner |
| 45 | Repair of PCB of all type of AC. |
| 46 | Metal top with bottomsuitable for 16 Amps Capacity1.5/2.0/3.0 Ton Capacity Air conditioner |
| 47 | Refrigerant gas R22/R-32 for topping up. |
| 48 | Refrigerant gas R 134(a) for topping up. |
| 49 | Refrigerant gas R 410(a) for topping up. |
| 50 | M&L for renewal of damagedInsulation in white colour with water proof of size 1/4&3/8for Split AC complete as per existing sitecomplete all as specified and directed. |
| 51 | M&L for renewal of damaged Insulation in white colour with water proofof size 1/2 & 5/8for Split AC complete as per existing sitecomplete all as specified and directed. |
| 52 | M&L for renewal of Rubber bush suitable for 1.5/2.0 ton capacity Suitable for Air conditioner as per samplecomplete all as specified and directed. |
| 53 | M&L in servicing of inverter AC of capacity 1.5 Ton with pressure cleaning complete all as specified and directed. |
| 54 | M&L for renewal of Copper Tube of size 1/4inch suitable for any type and any capacity Air conditionercomplete all as specified and directed. |
| 55 | M&L for renewal of Copper Tube of size 3/8 inch and 5/8 inch suitable for any type and any capacity Air conditionercomplete all as specified and directed. |
| 56 | Taking out and shifting new locationand refixingboth indoor and outdoor unit ofsplit type Air conditioning electrically driven 230V/250V ,AC 50 Hz capacity 1.5/2.0/3.0 Tonin wall with rawl plugs including making holes for inlet /outlet in the wallwith condensing unit as per suitable size and making good existing surface including insulation of tubing with expanded polythene foam insulation tubing and making necessary connection including M&L for unplastiised PVC pipe medium duly 20 mm dia for draining out condensed water all as required and directed including necessary connection through voltage stabilizer complete all as specified and directed. |
| 57 | S&F metal bracket for split AC for fixing on wall complete all as specified and directed. |
| 58 | M&L for renewal to walk in cooler/Cassette AC/Ductable AC andrepair/renewal the compressor, filter including gas charging and general service complete all as specified and directed. |
| 59 | S&F in renewal of complete indoor unit of window/Split AC of capacity 1.5 Ton complete all as specified and directed. |
| 60 | S&F in renewal of complete outdoor unit of window/Split AC 1.5 Ton complete all as specified and directed. |
| 61 | S&F in renewal of complete indoor unit of window/Split AC of capacity 2 Ton complete all as specified and directed. |
| 62 | S&F in renewal of complete outdoor unit of window/Split AC 2 Ton complete all as specified and directed. |
| 63 | S&F in renewal of complete inverter type indoor unit ofSplit AC 1.5 Ton complete all as specified and directed. |
| 64 | S&F in renewal of complete inverter type outdoor unit ofSplit AC 1.5 Ton complete all as specified and directed. |
| 65 | Dismantling and taking out the existing old unserviceable compressor any make from invertor type split AC and S&F New compressor suitable for inverter type Split AC of capacity 1.5 Ton complete all as specified and directed. |
| 66 | PCB Circuit suitable forinverter type Split AC of capacity 1.5 Ton |
| 67 | S&F in renewal of Air Conditioner Outdoor Valve with size of 1/2 Inch L type (13mm) for 1.5 Ton complete all as specified and directed. |
| 68 | S&F in renewal of Air Conditioner Outdoor Valve with size of 1/4 Inch L type (13mm) for 1.5 Ton complete all as specified and directed. |
| 69 | S&F in renewal of Air Conditioner Outdoor Valve with size of 1/4 Inch L type (13mm) for 2 Ton complete all as specified and directed. |
| 70 | S&F in renewal of Air Conditioner Outdoor Valve with size of 5/8Inch L type(13mm) for 1.5 Ton complete all as specified and directed. |
| 71 | S&F in renewal of Copper wire with size of 2.5 Sqmm with 3 Core complete all as specified and directed. |
| 72 | S&F in renewal of Copper wire with size of 2.5 Sqmm with 4 Core complete all as specified and directed. |
| 73 | Dismantling and taking out the existing old unsv compressor sealed unit from Water cooler and S&F newcompressor copper wound unit for operation on single phase, 230 V, 50 Hz, AC supply & confirm to IS-1067 Part-I,suitable for Water cooler of cooling capacity 40/80 ltrs/hrs and complete all as specified and directed. |
| 74 | All as per item No. 32 here in beforebut compressorsuitable for Water Cooler of cooling capacity 150 ltrs/hrs complete all as specified and directed.. |
| 75 | M&L for carry out through check up of the unserviceable watercooler of any make, size and capacity, making it serviceable by tightening the connection, checking power point and making it functional, renewal of screws, small pieces of wire, etc complete all as specified and directed. Note:- (i) Petty stores such as insulation tape, screws, small pieces of wires, plug top etc shall be provided by the Contractor without any extra cost to the department complete all as specified and directed. |
| 76 | The following items supply only complete all as specified and directed. :- |
| 77 | Blower fan motor SP,230V, 50 Hz suitable for 40/80, 60/120 Ltr/hr capacitywater cooleras per existng sample complete all as specified and directed. |
| 78 | All as per item No 35.01 here in before but suitable for 150/180 Ltr/hr or equivalent water cooleras per existng sample complete all as specified and directed. |
| 79 | Capacitor for condenser motor suitable for any capacity, size. |
| 80 | Over load Protector suitable for compressor of water cooler 150/180,60/120 Ltr/hr and 40/80 Ltr/hr capacity. |
| 81 | Thermostat switch with knobsuitable for compressor of water cooler 150/180,60/120 Ltr/hr and 40/80 Ltr/hr capacity |
| 82 | PVC float valve alongwith ball with complete accessories for water cooler any capacity of size 15 mm dia. |
| 83 | Self closing water tap 15 mm dia chromium plated inner/outer thread for water cooler 150/180, 60/120 Ltr/hr and 40/80 Ltr/hr capacity. |
| 84 | M&L for dismantling of water cooler of any capacity and taking out complete internal assembly i.e. Inner tank, inlet and outlet connection etc and descaling with chemical agent including cleaning and washing and reassembling with same position and making the tank leak proof by necessary brazing/welding work with gasket complete all as specified and directed. |
| 85 | M&L for removing burnt/defective sealed compressor unit of any make from any type and Capacity of 165 to 200 Ltrs refrigerator by cutting of suction and discharge lines and un-screwing of foundation nuts and supply & fixing new sealed compressor unit complete all as specified and directed. |
| 86 | All as per item No 37.00 here in beforebut compressor suitable for refrigerator capacity of 280 to 320 Ltrs complete all as specified and directed. |
| 87 | The following items supply only :- |
| 88 | Freezer suitable for165 to 200 ltrs capacity Refrigerator |
| 89 | Freezer door suitable for 280 to 310 Ltrs capacity Refigerator |
| 90 | Relay current typeand over load protector suitable for compressor complete. |
| 91 | Thermostat auto defrost type suitable for any make and any capacity Refrigerator single door. |
| 92 | Thermostat auto defrost type suitable for any make and any capacity Refrigerator doubledoor. |
| 93 | Air Filter suitable for any make and any capacity Refrigerator. |
| 94 | S&F suitable timer for any capacity. |
| 95 | Electric blower motor suitable for 300 ltr refrigerator inverter type. |
| 96 | PCB Circuit suitable for 300 ltr refrigerator inverter type. |
| 97 | Heating sensor suitable for 300 ltr refrigerator inverter type |
| 98 | Thermostate suitable for 300 ltr refrigerator inverter type |
| 99 | Compressorsuitable for 300 ltr refrigerator inverter type |
| 100 | Refrigerant gas R-600/R-290 in 150gm Canfor topping up for refrigerator inverter type |
| 101 | M&Lfor testing the leakage in system by charging Nitrogen Gas up to 300 PSI.Repairing the leakage spots/Joints with welding work including supply and renewal of filter pencil type copper and capillary tube of existing dia & length. Making the system leakproof and vacuuming the system complete all as specified and directed. |
| 102 | M&L carry out through check up the unserviceable Deep Freezer of any make, size and capacity, making it serviceable by tightening the connection, checking power point and making it functional, renewal of screws, small pieces of wire, etc complete all as specified and directed.Note:- petty stores such as insulation tape, screws, small pieces of wires, plug top etc shall be provided by the Contractor without any extra cost to the department. |
| 103 | Dismantling and taking out the existing old unsv compressor sealed unit from Deep freezer and S&F newcompressor copper wound unit for operation on single phase, 230 V, 50 Hz, AC supply & confirm to IS-1067 Part-I,suitable for Water cooler of cooling capacity 310/320 ltrs/hrs and complete all as specified and directed. |
| 104 | The following items supply only :- |
| 105 | Relay current type and over load protector suitable for compressor. |
| 106 | Thermostat auto defrost type suitable for any make and any capacity Deep Freezer |
| 107 | Indicating lamp (Red and Green) 230V complete suitable for any make and any capacity Deep Freezer as per sample |
| 108 | Capillary tube of suitable length as per existing size for Deep freezer any make and any capacity |
| 109 | Starting overload relay suitable for310/320 ltrs capacity Deep freezer |
| 110 | Condenser motor (Rotary fan) suitable for any type and any capacity deep freezer. |
| 111 | Labour only for charging refrigerent gas R-22/R-410A/R-134(a) for Refrigerator/Deep freezer/Water cooler/Window and splittype Air conditioner after duly rectifying leakagesby welding/brazing and testng by charging N2 gas for 24 hours complete all as specified and directed . Note:- Refrigerant gas to be measured and paid separately under relevant items of this schedule |
| 112 | Dismantling and taking out the existing old unsv fan motor with blade including mounting brackets from Desert coolers and S&F new3 speed fan motor with blade of capacity 1/6 HP (125 W), 230 V, 50 Hz, SP, AC supply confirming to IS-996/79 (motor only) with mounting accessories and connection complete suitable forD/cooler of capacity 4000/5000/6000 Cum per hrs complete all as specified and directed. |
| 113 | Taking out burnt winding wire from cooler (Which req rewinding) Motor capacity 1/6 HP (125 W), 230 V, 50 Hz, SP, AC supply confirming to IS-996/79 (motor only) with mounting accessories and connection complete suitable forD/cooler of capacity 4000/5000/6000 Cum per hrs, single phase, Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & throughly cleaning all the components of Motar, oiling, greesing, renewal of rusted/unsv nuts, bolt, machine screws, shaft etc as required reassembling the Motar to Desert Cooler, testing complete & Transporting back to MES Yard complete all as specified and directed. Note : (i) Testing should be done to repair Desert coolerminimum 24 Hrs continues running in MES store yard before fixing at site complete. |
| 114 | The following items supply only :- |
| 115 | Water circulating submersible pump, 1300 RPM, SP, 230V, 50Hz 1.5M head , discharge 7.0 Ltrs/hr. |
| 116 | Filter pad made out of wooden wool suitalbe for Air grills of desert cooler as per existing size |
| 117 | Capacitor for 2.5/4MFD for desert cooler. |
| 118 | Capacitor for 5/6 MFD for desert cooler. |
| 119 | Front panel (Air grills) of dimension as per existing size suitable for desert coolerof capacity 4000/5000/6000 Cum per hrs. |
| 120 | PVC Flexible hose suitable for cooling system of desert Cooler. |
| 121 | PVC Fan Blade suitable for 3000/4000/5000/6000 RPM as per sample. |
| 122 | Cooler Jaali width 1 mtr for supporting filter pad as per existing model and size |
| 123 | Side Panel of desert cooler as per existing model and size |
| 124 | Selector switch as per existing model and size |
| 125 | Bolt, nut with washers as per sample |
| 126 | PVC Connector i.e. (Elbow, Tee, 3 way etc) |
| 127 | 5 Amp Switch. |
| 128 | 5 Amp Plug Top. |
| 129 | Monoplate with 5 Amp switch. |
| 130 | S&F top portion/cover of the desert cooler of the existing size. |
| 131 | S&F flexible wire of 2 core with size of 1.5 Sqmm complete all as specified and directed. |
| 132 | Taking down the evaporative type desert coolers of Capacity upto 5000 Cum/hr by disconnecting all the electrical connections cleaning all the components by removing the side panels and painting the coolers with two coats of synthetic enamel paint out side and moisture resistance primer inside with spray painting and fixing back the removed panel and reconnecting with electrical connections and writing the MES No complete all as specified and directed. |
| 133 | S&F leak proof desert cooler tank of size 29\" x 14\" made of 20 guage GI sheet complete all as specified and directed. |
| 134 | Complete Repairing/Servicing/Testing of Stabilizer with capacity of 2 KVA complete all as specified and directed. |
| 135 | Complete Repairing/Servicing/Testing of Stabilizer with capacity of3 KVA complete all as specified and directed. |
| 136 | Complete Repairing/Servicing/Testing of Stabilizer with capacity of4 KVAcomplete all as specified and directed. |
| 137 | Complete Repairing/Servicing/Testing of Stabilizer with capacity of5 KVAcomplete all as specified and directed. |
