|
| 1 | Displacement (CC) / Engine capacity.:700 cc - 1250 cc |
| 2 | Max Power : 20-30BHP @ 2500 rpm and above |
| 3 | Max Torque : 500NM @ 2000 rpm and above |
| 4 | Type of fuel : Diesel |
| 5 | Load Capacity : 2 Cum |
| 6 | Vehicle emission Norms : BS _VI. |
| 7 | No of cylinder in engine : 2 - 4 cylinder |
| 8 | Length of chassis : 3800 mm - 3950 mm |
| 9 | Width of chassis : 1500 mm - 1550 mm.Ground clearance. 150 mm -165mm |
| 10 | Fuel tank capacity : Diesel-30 Ltrs to 40 ltrs CNG- 12-25kg |
| 11 | Size of Tyre\"s & No\"s : 145R12-5Nos. |
| 12 | wheel base : 1900 mm - 2250 mm |
| 13 | Gross vehicle weight : 1550 kg - 1900 k9 |
| 14 | Clutch: Single plate dry friction diaphragm |
| 15 | Transmission System : Manual |
| 16 | No of speed/ forward gears: 4 Nos Speeds(4F+ 1R) |
| 17 | Type of Steering : Manual / Power |
| 18 | Speed Governors : Shall be Fitted |
| 19 | Pay Load : 800KG to 1000KG |
| 20 | Tipper body length: 2100 mm-2200mm, Mild steel |
| 21 | Tipper body Width: 1400 mm -1500mm, Mild steel |
| 22 | Tipper body Height : 750mm- 950 mm, Mild steel |
| 23 | Side portion (LH &RH)& reardoors Sheet thickness: 2 mm, Mild steel |
| 24 | Tipper body top sheet includingframe sheet thickness: 1.6mm, Mild steel |
| 25 | Tipper Body Top Lid Sheetthickness: 1.2mm, Mild steel |
| 26 | Tipper Container : Tipper Contajner should be Fabricatedwith two doors on the rear side andfour doors on four top corners of thecontainers with hinges and lockingsystem. A partition should be providedon the middle of container along thevertical lenqth of the body. |
| 27 | Tipper Body Top Lid main Sheetthickness : 75x40x6mm |
| 28 | Hydraulic cylinder make : Reputed Make |
| 29 | Hydraulic system driven : Main Engine |
| 30 | Pump Make: As per IS standard |
| 31 | Painting : Should be painted with one coat ofAnti-corrosive epoxy primer and twocoats of enamel paint for approvedquality to ensure long lasting resistancefor weatherizing and breakage. Thecolor shade should be as per norms. |
| 32 | Lettering : To be carried out as directed by Deptofficers |
| 33 | Tipper body rear door : Shall be with necessary lockinq facility. |
| 34 | Side safety guard : Shall be provided as per RTOrequirement |
| 35 | Additional conditions : Vehicle with fuel sensor and GPStracking. |
| 36 | Warranty Distance/Year : 25000Km/12 months whichever isearlier. |
| 37 | For thefirstoneyeartheoperationandMaintenancecostperLCV shall be theresponsibility of thesupplier. |
| 38 | Light Commercial Vehicle |
