Tender For Work Sanctioned Under Additional Business Plan 2024-25 FOR THE WORK SANCTIONED UNDER ADDITIONAL BUSINESS PLAN 2024-25 IN AREA UNDER ELECTRICITY URBAN DISTRIBUTION DIVISION-I, GORAKHPUR 1 Details of work for getting the work of separation of 11 KV feeders approved in the business plan under Electricity Urban Distribution Division-I Gorakhpur done on semi-turnkey basis: - 2 Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- 3 3x185 mm2 XLPE 11 KV 4 Cable jointing kit 11 KV XLPE 3X185 sq mm 5 S.T. Pole 11 M Long 6 11 KV Dropper Channel 7 11 KV Top Channel 8 11 KV Pin Insulator 9 11 KV pin with net 10 Stay Complete 11 Earthing Complete 12 11 KV VCB O/G CTR 200/100/5A, 350 MVA 13 Supply offollowing material/fitting complete in all respect :- 14 Holding clamps for top, dropper, t-off etc 15 GI Nuts & Bolts off size 16 G.I Pipe dia 150 mm 17 The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor.Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor).Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevent IS Specification. 18 Painting of Pole by double coating Aluminium & Red oxide paint. Paint will beprovided by contractor 19 Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO norms. 20 Laying and dressing of under ground 11 KV 3X185 sq mm XLPE Cable by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 21 Erection of 11 KV 3X185 sq mm XLPE Cable Jointing Kit with complete work 22 Making Loop alongwith dressing, Marking, Tagging and Hoisting of cable on Single/Double pole using G.I. Pipe 6dia 3 mtr. Long with complete work. 23 Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work) 24 Erectionof11 KV VCB O/G CTR 200/100/5A, 350 MVA 25 Earthing of11 KV VCB O/G CTR 200/100/5A, 350 MVA 26 Details of the work for getting the installation of new 250 KVA distribution transformers approved in the business plan under Electricity Urban Distribution Division-I Gorakhpur on semi-turnkey basis: - 27 Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- 28 250 KVA Transformer 29 11 KV XLPE Cable 3X70 sq mm 30 11 KV C/J Kit 3X70 sq mm 31 ST Pole 09 M long 32 ST Pole 11 M long 33 MS Top Channel (125x65x2240) mm 34 MS angle (Dropper) 100X50X2028 mm 35 ACSR Weasel conductor 36 ACSR Dog conductor 37 11 KV Pin Insulator with pin 38 11 KV Disc insulaor with fiitings 39 LT AB Cable (3X150+1X120+1X16) sq mm 40 LT Cable 1X35 sq mm 41 11 KV Fuse set 42 11 KV V cross arm 43 11 KV T-Off Channel 44 Stay complete (Stay rod 16X1800 mm, stay wire 5 kg, stay clamp, bolt & nuts) 45 Earthing complete 46 LT Cable 1X240 sq mm 47 Supply offollowing material/fitting complete in all respect :- 48 LT Three Phase Distribution box 49 Clamp for LT Three Phase DB Box 50 Suspension Clamp with I hook (Insulated) 51 Dead end Clamp with I hook (Insulated) 52 Piercing Connector (Insulated) 53 Shackle insulator 54 LT Clamps 55 F Bracket 56 Holding Clamp for top, dropper channel Fuse set etc with nuts & bolts 57 Copper Z Calmp 58 GI Nuts & bolts of different sizes 59 Al Lugs 60 The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, GI Nuts & Bolts off size etc will be provided by the contractor.Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor).Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevent IS Specification. 61 The excavation of foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of PCC Pole with fixing of necessary clamps & accessories as per required. All required materials such as Holding clamp/PCC/LT clamp, F-Bracket, LT shacle insulator, GI Nuts & Bolts off size etc will be provided by the contractor.Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor).All work will be done as per RESPO norms & relevent IS Specification. 62 Painting of Pole by double coating Aluminium & Red oxide paint. Paint will beprovided by contractor 63 Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO norms. 64 Fabrication, errection, commissioning & Testing of 250 KVA T/F on Plinth with all accessories including make its LT and HT connection. All neessary materials will be supplied by the Contractor. 65 Chemical earthing of Transformer (Body+Neutral) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor) 66 Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work) 67 Laying of ACSR Dog/Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required. 68 Laying and sagging of overhead 11 KV 3X70 sq mm XLPE Cable as per site required. 69 Erection of 11 KV 3X70 Sq.mm. Cable Jointing Kit 70 Erection of 11 KV Fuse set 71 Construction of T/F plinth of size 2x2x1.2 M with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely andplastering outer surface as per RESPO norms. Top of the plinth covered with 4 RCC Slab of ratio 1:1.5:3 (Cement, sand & concrete) grouting with 2 No ISMC size 125X65X6 MM (confirming to IS 808:1989) of 2000 mm long for resting. All required materials will be provided by the contractor. 72 Grill fencing of 11/0.4 KV S/S shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50X50X5 mm angel the frame is also have 1 No Horizontal runner of MS flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. The work is including painting of fencing as per norms. Work will be done as per RESPO specification. 73 Laying & sagging of ABC (3X150+1X120+1X16) Sq.mm. Cable of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB,XLPE 1X16 Sq.mm. Al. cable for giving connection to Street Light and nuts&bolts off size by the contractor. 74 Supply and Complete Installation of 2 Nos. Henley Type Tailless Unit 300 AMP in Box using LT XLPE 1X240 Sq.mm. Cable,LT Crimping Lug, GI Nuts & Bolts etc (as per site requirement) on 11/0.4 KV Distribution Transformer. (Only LT XLPE 1X240 Sq.mm. Cable will be provided by Department)Specification of Henley Type Tailless Unit 300 AMPdescribed as below-1. Henley Type MS Sheet duly painted grey enameled paint- MS of 18 SWG (54X4.5 inches) with holes as per requirement2. 6 No. Insulator- Made of White Glazed Porcelain3. 6 No. Copper Spring Contact- 32X3.7 mm Made of Copper4. 3 No. L Contact - Brass5. 3 No. Metal Part Connector For Holding Busbar- Brass6. 1 No. Casted Patti- M.S.7. 1 No. Neutral- Brass8. Iron Clip, Bolt, Nuts, Washer and Screw etc for Tightening- All Galvanized9. Copper Bus Bar Strip- 500X50X5 mm (3 Nos.Copper Busbar Strip to be used on 2 Nos. Tailless unit)10. Aluminium Bus Bar Strip- 500X50X5 mm (1 No)All work will be done as per RESSPO Norms & relevent IS Specification. 75 Supply, fabrication, erection of LT Pillar Box for Tailless Unit after making Plinth of Height 300 mm above ground level LT Pillar Box Size- 1650X1050X520 mm with Gate and Proper Locking arrangement (Canopy of 15 Degree )All work will be done as per RESSPO Norms & relevent IS Specification. 76 Details of work for getting the work of conversion/upgradation of dilapidated AB cables approved in the business plan in the area of Electricity Urban Distribution Division-I, Gorakhpur done on semi-turnkey basis:- 77 Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- 78 LT AB Cable (3X150+1X120+1X16) sq mm 79 ST Pole 9 mtr Long 80 LT Cable 1X35 sq mm 81 Earthing complete 82 Supply offollowing material/fitting complete in all respect :- 83 LT Three Phase Distribution box 84 Clamp for LT Three Phase DB Box 85 Suspension Clamp with I hook (Insulated) 86 Dead end Clamp with I hook (Insulated) 87 Piercing Connector (Insulated) 88 GI Nuts & bolts of different sizes 89 Laying & sagging of ABC (3X150+1X120+1X16) Sq.mm. Cable of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB,XLPE 1X16 Sq.mm. Al. cable for giving connection to Street Light and nuts&bolts off size by the contractor. 90 Dismentling of old existing A.B. Cable 91 Dismentling of old existing ST Pole 92 Carriage of old existing conductor & Pole from work site to store centre 93 Disconnection & reconnection of consumer service cables
