Tender For Repair And Renovation Of Bhq Chadoora, chadoora-Jammu And Kashmir

Repair And Renovation Of Bhq Chadoora- 1 providing and fixing curtains of crewel quality incl all charges 2 Varnishing with varnish of approved brand and manufacture Two or more coats of glue sizing with spar varnish on an under coat of flatting varnish 3 P/F 12 mm laminated wooden pannelling particle board incl cost of frame work and beadings complete 4 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 5 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 6 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borderspasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture. Backside of aluminum sheet to be painted with two or more coatsofepoxy paint over and including ppropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. Mandatory/Regulatory sign boards of 900 mm diameter withpart as length of 3750 mm. 7 Providing and fixing 20mm thick wooden planksfor cup boards with M.S. screws Budloo/fir wood 8 Providing and fixing cupboard shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade I Type II) having one side decorative lamination and other side a balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of Engineer- in-charge 9 Providing and laying in position cement concrete of specified grade including curing but excluding the cost ofcentring and shuttering. All work upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 10 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge 11 Add provision for sign boards, Photographs sanitary fitting items carriage of all materials and unforseen items

INR 200 /-

INR 6660.0 /-

INR 3.33 Lakhs /-