Tender work number 01 Beautification work on the track of Ganganahar Walipura in Bulandshahr city, 1 Civil Work 2 Excavation in trenches for foundations, pipes cables etc. in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 50m and drassing of sides and ramming of bottom disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m. (0 to 1.5 m depth) (PWD SI No-251a)2022 3 Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement foundationincluding supply of all material ,labour and T & P etc. required for proper completion of the work (sorS.I No- 281) 4 First class Brick Work in1:4 one cement & four Coarse sand of 2.20 F.M. mortar.in foundationand plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. [305a]2022 5 First class Brick Work in1:4 one cement & four Coarse sand of 2.20 F.M. mortar.in superstructure including supply of all materials, labour and T&P etc. requried for proper completion of the work. [305a+309+310]2022 one brick wall 6 12 mm thick cement plaster with cement and coarse sand mortar in 1:4 over brickwork minimum thickness not to be less than 1 cm. including supply of all material, Labour T&P etc. required for proper completion of work. (13:11- 584new item,) 2022 7 Providing wall putty an new surface w approved quality material of Berget/JK/Birla or similar maxe 2 coats S No 15:26 New tem 8 Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm [ dsr 2023(13.45.1)] 9 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) [ dsr 2023 10.15.1 ] 10 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-109.As in item (644) above but for every coat after the first coat. [sor 2022 645+644] 11 R.C.C. work with Cement approved coarse sand and 2 cm.(3/4) gauge approved stone ballast in the proportions of 1:1½:3 but in R.C.C. column in excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I., binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work.Excluding cost of Binding wire. sor 2022 [289] 12 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars dsr 2023 [5.22.1] 13 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red dsr 2023 [8.2.2.2] 14 S/F and installation kiosk / stall allcomplete as per giving standerd drawing and design as per direction by engineer in charge 15 Supply and fixing of 3 nos seater ss bench 304 grade of size 1450*800*500 mm and weight not less than 40 kg with back rest the main frame of ss bench would be of size 40 mm dia and 16 swg back thick with necessary support of 32 mm dia and 16 swg pipe seat and back rest would be 1.5 mm thick perforated sheet of size450*450 mm with partition plate complete bench would be mounted with 4 nos leg of same frame material and thickness . attached with backrest plate of size 300*125 mm and 3 mm thick with all necessary fixing arrengement with holes bolt and fastners or with cement concrete of mix 1:1.5:3 of appropriate size of blockas per design and drawing in glossy finish the name plate of MLA of size 20*10*1 cm3is to be fixed on each bench 16 Supply and fixing of stainless steel swing typeDustbin as per givingstanderd design and drawing all complete as per direction by engineer / incharge 17 Supply and fixingand operation of fountain at site as per giving drawing and design with supply of all material labour and t&P including 3 years maintenanceetc required for proper completion of work as per direction by engineer incharge [MR.] 18 Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: [DSR-2023/11.53] 19 Electrick Work 20 Supply and fixing of decorative 40 to 45 watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection coplete in all respect. CAT-AAA SOR No. 1443/2018 21 Supply & fixing of 7 mtr GI Octagonal Pole of approved make(top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket ( 1 Mtr length) on RCC foundation bolts, excmpletee in all respect. SOR No. 641/2018 22 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT-AAA SOR No. 1454/2018 23 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. (SOR No. 725(B)/2018) 24 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. (SOR No. 717/2018) 25 S/L Aluminium Conductor PVC insulated armoured served sheathed cables 1100 Volts grade. Cable shall be property connected with earth conductor by clamps etc.cable size16 sq. mm 4 core (SOR NO. 501(i)-507/2018) 26 S/L of 63mm dia HDPE Pipe for laying cable and road crossing.(DSR NO. 14.16.1/2022) 27 Supply and fixing and concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.(SOR No. 149(A)/2018) 28 Supply and wiring of submains with 2 nos. 6 sq mm and 1 no 4 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductorcable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.(SOR No. 291(D)/2018) 29 S&F of 100 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect.(SOR No. 328/2018)
