Fabrication And Supply Of Piping Tbl Dus With Bhel Material (Osb) , Gr-91 Fab , Non Ibr -Condensing Loop Assy / U - Tube (As) / (Cs) , Non Ibr -Fab Of Pipe With Attachment : Cs & Nibr : Up To 15 Attachments Like Stubs,Carrier Plate,Flange,Bottom Support (Sub Assembly),Etc.) / Saddle Support /Sleeve Arrangement , Puddle Flange From Pipe , Non Ibr -Fab Of Pipes Above Od 1016 Mm & Up To Od 2540 Mm With And Without Attachments - Cs - Nibr (Raw Material Issued As Pipes) , Non Ibr -Fab Of Plate Formed Pipes Above Od 400 Mm & Up To Od 1016 Mm With And Without Attachments - Cs - Nibr - Including Od 400 Mm , Non Ibr -Fab. Of Manhole Assembly - With Main Pipe (Plate Formed ) & (Incl. M/C Of All Flanges) (Cs) , Non Ibr -Fab. Of Manhole Assembly -Without Main Pipe(Incl. M/C Of All Flanges) (Cs) , Non Ibr -Fab.Of Plate Formed Reducers (Concentric/Ecentric) Above 50 Kg And Up To 250 Kg - As / Cs - Nibr , Non Ibr -Machining Of Flanges / Flat End Closure Upto Nb 65 Mm , Couplings / Coupling Pin / Adopters / Adapters/ Reducers From Round Upto 80Mm/ Nipples / Tail Pipe / Union Nut/Load Pin/Spacer Ring/Spherical Pin - Nibr/End Cap Machined From Ss/As/Cs Rod Up To Dia 80 Mm / , Non Ibr -Machining Of Flanges Above Nb 200 Up To Nb 400 / Flat End Closure Above Nb 200 Up To Nb 400 With/Without Attachments Like Stubs /Handle Etc - Nibr-Cs/As , Non Ibr -Machining Of Flanges Above Nb 400 Up To Nb 800 /Flat End Closure Above Nb 400 Up To Nb 800 With/Without Attachments Like Stubs/Handle Etc - Nibr-Cs/As , Non Ibr -Machining Of Flanges Above Nb 65 Up To Nb 200 / Flat End Closure Above Nb 65 Up To Nb 200 With / Without Attachments Like Stubs /Handle Etc / Non Ibr -Oriffice Plate (As/Cs) Made Out Of Plate Inclusive Of Welding If Applicable - Nibr-Cs/As , Non Ibr -Machining Of Flanges Above Nb 65 Up To Nb 200 / Flat End Closure Above Nb 65 Up To Nb 200 With Attachments Like Stubs /Handle Etc Including Cutting/ Non Ibr -Oriffice Plate Upto Nb 200 (Ss) Made Out Of Plate And Plasma Cutting Inclusive. - Nibr-Ss , Non Ibr -Oriffice Plate Assembly (Ss) Made Out Of Rod / Pipe And Plasma Cutting, Machining & Welding Inclusive - Nibr , Non Ibr -Weld On Bracket Assy (Welded) / Clevis With Bolt Assy (Welded) Including Special Coating , Non-Ibr Clamps - Rod Type Cs , Pipes - Cut To Reqd Length , Pps , Shock Absorber Clamp - As , Shock Absorber Clamp - Cs , Ss Fab , Stubmadeout Of Rod Diaupto 80 Mm (Cs/As/Ss) Length Less Than 240 Mm , Tracer U Clamps , Welded Tee - Od 3640/2640 , Non Ibr -Fab Of Mitre Bend / Welded Tee / Y-Piece From Plate - Above Od 1016 Mm -Upto Od 2540 Mm Nibr With Or Without Attachments (Like Saddle Supports, Stub, Etc) , Rg Plug-Cs , Rg Plug-As , Decoiling Of 10 Mm And 12Mm , Insert Machining (As) , Insert Machining (T91 & T92) , Insert Machining (Tp347h & S30h) , Nipple Machining (Det + C) , Nipple Machining (Full Pen + C) , Ss End Cap Id 33.9 , Ss End Cap Id 38.6 , Ss End Cap Id 45 , Ss End Cap Id 48.13 , Ss End Cap Id 51.5 , Ss End Cap Id 54.5 , Ss End Cap Id 57.5 , Ss End Cap Id 64 , Ss End Cap Id 70.35 , Ss End Cap Id 76.7 , Non Ibr -Target Plate Assembly ( Above Pipe Od 356 Mm) , Non Ibr -Target Plate Assembly (Upto Pipe Od 356 Mm) , Target Plate (Cs) , Target Plate (Ss) , Ut Reference Block To Be Made Out Of Sa335 P91 / P92 Pipe Dia 219.1 Mm And Up To Dia 558.9 Mm Up To Thk 125 Mm ( Axial) => Limited
