K.I.P. - Item No.1 :-Excavation in all kinds of soil including boulders upto 0.6 m diameter ( 0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 1 km and 6m lift 2 Item No.2 :-Excavation in hard murum including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated material neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 1 km and 6m lift. 3 Item No-3:- Excavation in hard rock of all toughness by breaker including boulders above 0.6 m dia.(0.113Cum) minimising damage to side slopes of excavation and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, levelling bed etc., complete with lead upto 1 km and all lifts as directed . 4 Item No-4:-Providing casing embankment using selected pervious material from approved borrow areas (Private land- contractors own material) in layers including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 % of Proctor density using vibratory compactor including cost of water etc., complete with lead upto1 km for water and all lifts as directed. 5 Item No-5:- Providing & laying chip masonry back filling behind concrete lining in CM 1:8 including striking joints, curing, centering, scaffolding etc. complete but excluding pointing etc. complete as directed (35% mortar) (Cement 1.01 bags/Cum) 6 Item No 6:- Providing and laying in situ mechanised lining in M-15 (20 MSA)(28 days cube compressive strength not less than 15N/sqmm) grade cement concrete with clean, hard, graded aggregates for canal side and bed using vibrating cylindrical type mechanical paver including cost of all materials, machinery, labour, cleaning with batching plant and transit mixer finishing with all slope of canal including centering, scaffolding, formwork, compaction, curing, by cutting grooves, filling with sealing compound and providing porous plugs preparation of sub grade etc. complete with all lifts as directed. Bed Lininng 7 Item No 6:- Providing and laying in situ mechanised lining in M-15 (20 MSA)(28 days cube compressive strength not less than 15N/sqmm) grade cement concrete with clean, hard, graded aggregates for canal side and bed using vibrating cylindrical type mechanical paver including cost of all materials, machinery, labour, cleaning with batching plant and transit mixer finishing with all slope of canal including centering, scaffolding, formwork, compaction, curing, by cutting grooves, filling with sealing compound and providing porous plugs preparation of sub grade etc. complete with all lifts as directed. Side Linning 8 Item No.7 : Cleaning grass and removal of rubbish upto a distance of 50 meters outside the periphery of the area as directed. 9 Item No.8 : Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed. 10 Item No.9 : Providing and fixing anchor bar of 25 mm diamete r 3.375m length with resin bond cement capsule anchorage through adit/itself including drilling holes, inserting grout capsule,driving anchor, cost of all materials, machinery, labour, ventilation,lighting,drainage and other ancillary operations etc complete with all lifts as Directed . 11 Item No.10: Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding by Batching Plant & Transit Mixerincluding shuttering, scaffolding, placing, compacting, curing etc. complete with an initial lead of 1 km and all lifts as directed. 12 Item No.11 : Providing and fixing RCC Boundary/Guard/Chainage block s of size 75x20x20cm including excavation and fixing in a block of 45x45x45cm in M-15 Concrete with oil painting of two coats, lettering etc. complete as Directed. ( height of stone above GL 40 cm.)
