|
| 1 | Complete seal kit for hermb make plough cylinder assembly (for WIL Make WB-1250 Model)(a)rubber bucket double acting – 01 No.(b)Seal ring big- 02 Nos.(c)Seal ring small – 02 No.(d) Flat Ring-02 Nos. |
| 2 | Complete seal kit for energy Tech. Engg. Make plough cylinder assemblyserial No. 022168/1250 |
| 3 | Complete seal kit for bottom valve cylinder 6” (a)Rubber bucket – 01 No.(b)Seal- 01 No.(c)“O’ ring- 02 Nos. |
| 4 | Complete seal kit for feeding chute cylinder-3” (a)Rubber bucket big-02 Nos.(b)Rubber bucket medium -02 Nos.(c)Rubber bucket small-02 Nos.(d)Seal ring big– 02 Nos.(e)“O” ring big- 02 Nos.(f)“O” ring small – 02 Nos. |
| 5 | Complete seal kit for break cylinder |
| 6 | Complete seal kit for Valve craft make Butterfly valve 10” |
| 7 | Complete seal kit for Valve craft make Butterfly valve 6” |
| 8 | Brass Nozzle For WIL make: V-1250 C/F M/c |
| 9 | Air Filter For WIL make: V-1250 C/F M/c with copper element |
| 10 | Butter fly valve with actuator 10” for WIL Make C/F M/c V-1250Make:- Valve Craft |
| 11 | Butter fly valve with actuator 6” for WIL Make C/F M/c V-1250Make:- Valve Craft |
| 12 | Actuator for butter fly valve 10” for C/F M/c V-1250Make:- Valve Craft |
| 13 | Actuator for butter fly valve 6” for C/F M/c V-1250Make:- Valve Craft |
| 14 | Chutte Cylinder Complete for WIL Make C/F M/c V-1250 |
| 15 | Plough Lock set complete |
| 16 | Spare for WB-1250 kg/chargeC/F New Machine.Solenoid ValveType : Single way K-3125Max. Pressure- 10 bar |
| 17 | Solenoid ValveType : K-412D |
| 18 | Solenoid ValveType : K-4123Make: Khusako |
| 19 | Air filter System Model: AF-2018L1-10 BarSize: 3/8” BSPL2-Pressure 0.15 to 0.85 MPAL3- 0.15 to 0.85 MPAMax. Temp.80oC |
| 20 | Plough lock system of WIL make-WB-1250kg/charge C/f M/c (New Model) |
| 21 | Filter Regulator Model:- SBAD-K-2G P-M7P-RGL Max Inlet Pressure:-17.05 kg/cm2 Size:-¼” BSP Make:- SHAVOTransparent BOWL-10.5 kg/cm2Section Pressure Range 0.87to 8.75 kg/cm2 |
| 22 | Rubber Buffer for V-1250 C/F M/c WIL make:-Drg .no.- 48187 |
| 23 | Rubber Star member for Coupling for -V-1250 C/F M/c |
| 24 | Oil Seal 250x220x16mm |
| 25 | ‘O’ Ring E-89123 |
| 26 | Complete Cylinder for sugar bin Make:- Festo Drg. No.-40-100PPV-A-141365623Pressure 12 bar with fixing clamp cover |
| 27 | Complete Cylinder for sugar bin Make:- Festo 5523 Max Pressure 12 bar |
| 28 | Complete Cylinder for sugar bin Make:- Festo DN-40 PPK-A-14147 SYS2043 |
| 29 | Sugar bin Pneumatic valve type: MFH-5Part no. 6211-55-23 Make:- Festo1.08 to 8 bar(Pressure) or 26 to 120 PSI |
| 30 | SolenoidValve four way code: 3013-6-2G |
| 31 | SolenoidValve four way code: 3012-6-2G |
| 32 | Spare for WB-1250 kg/charge WIL make C/f M/c of ‘A’ battery plough assembly complete with mist micro fog lubricator. |
| 33 | Make of plough: Energy tech. Engg. Serial no. 022168/1250(a) Plough in & out cylinder |
| 34 | (b) Plough uo-down cylinder |
| 35 | Spare for NHEC Make-NK-1100 Continuous Centrifugal MachineDriving shaft material C-45 tested forged steel bar with chemical composition and ultra sonic scanning, completed with keys, drilled tapped holes,lock nut washer,bolt etc. |
| 36 | Rubber V-seal ALT-150 diaSmall (AU-C-10993) |
| 37 | Rubber V-seal Big ACT-150 dia Small (AU-C-10993) |
| 38 | Top Angle ring |
| 39 | Bottom angle ring |
| 40 | Rubber buffer 150 dia x 75mm height |
| 41 | Charging Funnel (S.S) |
| 42 | Product- Distributer S.S -304 |
| 43 | Top rubber sealing Drg. No. Au-c-10989 |
| 44 | Bottom rubber sealing Drg. No. Au-c-10989 |
| 45 | Round head brass screw for top and bottom sealing :- (a) M6 x 16mm with hex nut |
| 46 | (b) M6 x 20mm with hex nut |
| 47 | Rubber gasket for outer casing item no.4Drg. No. NK-400 |
| 48 | Nipple for grease pipe ½” |
| 49 | Locking pin for produvt distributor |
| 50 | S.S nozzle for C/F machine NK-1100 |
| 51 | C.S Housing for NK-1100 complete with grease plate, shaft and SKF bearings. |
| 52 | Drive and driven Pulley |
